Ryobi RY14110 Drive Gear Maintenance, Replacing Front Wheels, Storing the Mower

Page 16

MAINTENANCE

DRIVE GEAR MAINTENANCE

See Figure 16.

To ensure smooth operation of wheels, the wheel assembly should be cleaned before storage.

Remove the nut by turning counterclockwise. Remove wheel and set aside.

Remove dust cover, e-ring, washer, pins, and wheel gear. Clean any dirt from these items and the end of the drive shaft by wiping with a dry cloth. If necessary, rubbing alcohol may be used to remove any stubborn dirt.

WARNING:

Do not lubricate any of the wheel components. Lubrication may cause the wheel components to fail during use, which could result in serious personal injury to the operator and/ or mower or property damage.

Reinstall wheel gear with the arrows facing the front of the mower. Reinstall pins, washer, e-ring, and dust cover.

Reinstall wheel and nut. Tighten nut clockwise to se- cure.

REPLACING FRONT WHEELS

See Figure 17.

To replace a front wheel:

Using a hex wrench, remove the hex nut by turning coun- terclockwise.

Remove the wheel and replace with new wheel.

Replace the hex nut and tighten securely by turning clockwise.

STORING THE MOWER

See Figure 18.

Remove the fuse key and store in a secure location out of the reach of children.

Removal of the battery is not required for storage.

Charge the battery pack every 2 months when not in use.

Before storage, wipe any dirt or debris from the battery area.

Turn mower on its side and clean grass clippings that have accumulated on the underside of the mower deck.

Wipe the mower clean with a dry cloth.

Check all nuts, bolts, knobs, screws, fasteners, etc., for tightness.

Inspect moving parts for damage, breakage, and wear. Have repairs made on any damaged or missing parts.

Check blade for damage, uneven, or excessive wear and replace blade if these conditions exist.

Store mower indoors in a clean, dry place out of the reach of children.

Do not store near corrosive materials such as fertilizer or rock salt.

To lower the handle before storing:

Fully loosen the handle knobs on the sides of the handle and fold the upper handle down.

Push inward on each side of the lower handle, and lift the sides of the lower handle past the edges of the handle mounting brackets. Avoid pinching or trapping any cables.

REPLACING THE BATTERY

The mower battery is designed for maximum life; however, like all batteries, it will eventually need to be replaced.

Charge the new battery pack before use. See Charging the Battery Pack in the OPERATION section of this manual.

To install a new battery:

Remove the fuse key.

Carefully lift the old battery by the handle.

Install the new battery pack.

Take the old battery pack to a recycling center that ac- cepts lead acid batteries. Never dispose of battery in fire or regular household trash.

12 — English

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Save this Manual for Future Reference Toutes LES Versions Todas LAS VersionesPage Iii Maximum 15 Maximal 15 Máxima Nut écrou, tuerca Table of Contents IntroductionImportant Safety Instructions Read ALL InstructionsSafety Rules for Charger Symbols Symbol Name DESIGNATION/EXPLANATIONCalifornia Proposition Name DESIGNATION/EXPLANATIONFeatures Assembly Unfolding and Adjusting Handle AssemblyInstalling the Mulching Plug for Mulching Operation UnpackingSetting Blade Height Charging the Battery PackInstalling the Grass Catcher for Rear Bagging Operation OperationSTARTING/STOPPING the Mower Mowing TipsSlope Operation See Figures 9Maintenance Resetting the FuseGeneral Maintenance LubricationDrive Gear Maintenance Replacing the BatteryReplacing Front Wheels Storing the MowerTroubleshooting Problem Possible Cause SolutionWarranty Limited Warranty StatementEnglish Avertissement Instructions Importantes Concernant LA SécuritéLisez Toutes LES Instructions Règles DE Sécurité Concernant LE Chargeur Symbole Signal Signification SymbolesSymbole NOM Désignation / Explication Proposition 65 DE LA Californie Avertissement NOM Désignation / ExplicationCaractéristiques Dévoilement ET Ajustement Poignée DE Réglage Assembly Installation DE L’INSERT BroyeurAssemblage DéballageInstallation DU Collecteur D’HERBE UtilisationRéglage DE LA Hauteur DE LA Lame Pour Arrière Utilisation D’ENSACHAGE Voir la figureDÉMARRAGE/ARRÊT DE LA Tondeuse Charge DU BLOC-PILESConseils DE Tondaison Utilisation SUR LES Pentes Avertissement Nettoyage DU Collecteur D’HERBERéinitialiser LE Fusible Voir FigureRemplacement DE LA Lame EntretienEntretien Général LubrificationEntreposage DE LA Tondeuse Remplacement DES RouesRemplacer LES Piles Problème Cause Possible Solution Dépannage4050 860Garantie Énoncé DE LA Garantie LimitéeFrançais Advertencia Instrucciones DE Seguridad ImportantesLEA Todas LAS Instrucciones Reglas DE Seguridad Para EL Empleo DEL Cargador Cuando cruce por superficies de gravaSímbolos PeligroPrecaución Símbolo Nombre DENOMINACIÓN/EXPLICACIÓNCalifornia Propuesta DE LEY NÚM Advertencia Características Armado Funcionamiento Instalación DEL Tapón Para TrituraciónInstalación DEL Receptor DE Hierba Ajuste DE LA Altura DE LA CuchillaEncendido Y Apagado DE LA Podadora Cómo Cargar EL Paquete DE BateríasSugerencias Para EL Podado Vaciado DEL Receptor DE Hierba Manejo EN Pendientes AdvertenciaReajustar EL Fusible Mantenimiento Advertencia Reemplazo DE LA CuchillaMantenimiento General LubricaciónGuardado DE LA Podadora Reemplazo DE LAS RuedasReemplazar LA Batería Corrección DE Problemas Problema Causa Posible SoluciónGarantía Declaración DE LA Garantía LimitadaNotas Volt SELF-PROPELLED Lawn Mower Manuel D’UTILISATION / Manual DEL Operador

RY14110 specifications

The Ryobi RY14110 is a versatile electric pressure washer designed for efficient cleaning tasks around the home and yard. With its robust performance, user-friendly features, and advanced technologies, it has quickly become a favorite among homeowners and DIY enthusiasts.

At the heart of the RY14110 is a powerful 2,000 PSI motor, capable of producing a flow rate of 1.2 gallons per minute. This combination makes it effective for tackling a wide range of cleaning applications, from washing vehicles and driveways to rinsing patios and decks. The electric motor not only enhances performance but also minimizes noise, making it a suitable option for residential areas.

One of the standout features of the Ryobi RY14110 is its ease of use. The unit is lightweight and comes equipped with a compact design, making it easy to transport and store. The integrated handle and wheels enhance mobility, allowing users to move the unit effortlessly across various surfaces.

The RY14110 also boasts a 25-foot high-pressure hose, providing ample reach for cleaning tasks without the need to constantly reposition the unit. The quick-connect nozzles further enhance versatility, offering four different spray patterns—0°, 15°, 25°, and soap. This adaptability allows users to customize the pressure and spray angle for different surfaces and cleaning needs.

Another impressive characteristic of the Ryobi RY14110 is its onboard storage for accessories. Users can conveniently store the included nozzles, hose, and cord, ensuring that everything is organized and easily accessible. This thoughtful design helps prevent the loss of essential components.

In terms of technology, the RY14110 features a leak-proof and garden hose connector, ensuring a tight fit and preventing water loss during use. This innovation not only improves efficiency but also prolongs the life of the unit by preventing wear and tear over time.

Lastly, the Ryobi RY14110 comes with a two-year warranty, providing peace of mind for users. Incorporating quality materials and engineering, the pressure washer is built to last and withstand the rigors of frequent use. In summary, the Ryobi RY14110 is a powerful, user-friendly electric pressure washer, ideal for homeowners seeking effective cleaning solutions without the hassle of gas-powered units. Its blend of features, technology, and durability make it an excellent addition to any cleaning arsenal.
Top Page Image Contents