2.0Table of Contents
Section |
| Page | ||
1.0 Warranty and Service | 2 | |||
2.0 | Table of Contents | 3 | ||
3.0 | Safety warnings | 4 | ||
4.0 | Introduction | 5 | ||
5.0 | Specifications | 6 | ||
6.0 Unpacking | 7 | |||
6.1 | Contents of shipping container | 7 | ||
7.0 Assembly | 8 | |||
7.1 | Tool caddy | 8 | ||
7.2 | Guard | 8 | ||
7.3 Bed extension (optional accessory) | 9 | |||
7.4 | Shelf assemblies (optional) | 10 | ||
8.0 | Electrical connections | 11 | ||
8.1 | Single Phase Operation | 11 | ||
8.2 | Three Phase Operation | 11 | ||
8.3 | Extension cords | 11 | ||
9.0 | Adjustments | 12 | ||
9.1 | Headstock and tailstock movement | 12 | ||
9.2 | Cam tightness | 12 | ||
9.3 | Tool support | 12 | ||
9.4 | Locking handles | 12 | ||
9.5 | Live center and cone | 13 | ||
9.6 | Indexer | 13 | ||
9.7 | Centers: installing/removing | 13 | ||
9.8 | Face plate: installing/removing | 14 | ||
9.9 | Speed change | 14 | ||
9.10 Sheave and belt alignment | 14 | |||
9.11 | Checking spindle play | 15 | ||
9.12 | Sheave/drive belt replacement | 15 | ||
10.0 | Operating controls | 16 | ||
11.0 | Operation | 16 | ||
11.1 | Inspection | 16 | ||
11.2 | Turning tools | 16 | ||
11.3 | Spindle turning | 17 | ||
11.4 | Face plate and bowl turning | 20 | ||
12.0 Maintenance | 22 | |||
13.0 | Indexer positions | 23 | ||
14.0 Troubleshooting the PM2020 Lathe | 24 | |||
15.0 Recommended lathe speeds (per diameter of workpiece) | 25 | |||
16.0 Replacement parts | 25 | |||
16.1.1 PM2020 Headstock Assembly – Exploded View | 26 | |||
16.1.2 PM2020 Headstock Assembly – Parts List | 27 | |||
16.2.1 PM2020 Stand and Bed Assembly – Exploded View | 29 | |||
16.2.2 PM2020 Stand and Bed Assembly – Parts List | 30 | |||
16.3.1 | Bed Extensions – Exploded View (optional accessory) | 31 | ||
16.3.2 | Bed Extensions – Parts List (optional accessory) | 31 | ||
16.4.1 | Outboard Turning Stand – Exploded View (optional accessory) | 32 | ||
16.4.2 | Outboard Turning Stand – Parts List (optional accessory) | 32 | ||
16.5 | Optional Accessories: Face Plates, Tool Supports and Misc | 33 | ||
17.0 | Electrical connections | 34 | ||
18.0 | Electrical: Remote On/Off Switch (optional accessory) | 35 | ||
3