Powermatic PM2020 manual Specifications, Capacities

5.0 Specifications

Model Number	PM2020
Stock Number	1792020
Capacities:
Working distance between centers	20”
Working distance between centers, 18” bed extension mounted	38”
Maximum distance between spindle face and tailstock quill	23-3/4”
Swing over bed	20”
Swing over toolrest base	17”
Motor and Electricals:
Motor type	totally enclosed fan cooled, induction
Horsepower	2HP (1.5 kW)
Voltage	220 V
Cycle	60Hz
Motor FLA (full load amperage)	6.2
Power requirements	220V, 3Ph or 1Ph
Drive system	Poly V belt, inverter drive
VFD input amperage	15.7A (1PH), 8.4A (3PH)
VFD output to motor	7.5A (3PH)
Recommended circuit*	20 A
* subject to local and national electrical codes
Headstock and Spindle:
Spindle speeds (RPM)	high 125-3200; low 50-1200
Spindle thread size	1-1/4” x 8 TPI
Spindle direction	forward/reverse
Headstock spindle taper	#2 Morse
Hole through headstock spindle, diameter	5/8”
Outboard external threads	1-3/16”–18 UNC
Indexing positions	48
Tailstock:
Tailstock quill taper	#2 Morse
Hole through tailstock spindle, diameter	3/8”
Tailstock quill travel	4-1/2” (114 mm)
Measurements:
Maximum overall length	62-1/4” (1581 mm)
Overall height to top of headstock	49-1/2” (1257 mm)
Distance from floor to centerline of spindle	44” (1118 mm) adjustable
Footprint of stand	35”L x 24”W (890 x 610 mm)
Tool support post diameter	1” (25.4mm)
Materials:
Headstock body	cast iron
Tailstock body	cast iron
Bed	cast iron
Legs	cast iron
Tool support and base	cast iron
Weights:
Net	559 lb (254 kg)
Shipping	609 lb (277 kg)

The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, Powermatic reserves the right to change specifications at any time and without prior notice, without incurring obligations.

6