Scag Power Equipment SVR61V-29FX Maintenance Considerations & storage, Front Tie Down Points

Page 10

R

Section 2

21.Tie the mower down securely using the tie down points located on the front and rear of the machine. See Figure 2-2 and 2-3. Secure using straps, chains, cable, or ropes. Both front and rear straps must be directed down and outward from machine.

TIE DOWN

TIE DOWN

POINT

POINT

 

Figure 2-2. Front Tie Down Points

TIE DOWN

TIE DOWN

POINT

POINT

Figure 2-3. Rear Tie Down Points

22.Use care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

23.NEVER leave the machine running unattended.

2.5Maintenance Considerations & storage

1.Never make adjustments to the machine with the engine running unless specifically instructed to do so. If the engine is running, keep hands, feet, and clothing away from moving parts.

2.Place the neutral lock lever in neutral lock, engage the parking brake, stop engine and remove key or disconnect spark plug wire to prevent accidental starting of the engine when servicing or adjusting the machine. Wait for all movement to stop before adjusting, cleaning or repairing.

3.Remove spark plug wire before making any repairs.

4.Keep all nuts, bolts and screws tight, to ensure the machine is in safe working condition. Check blade mounting bolts frequently to be sure they are tight.

5.Do not change the engine governor settings or overspeed the engine. See the engine operator's manual for information on engine settings.

6.To reduce fire hazard, keep the cutting units, drives, muffler and engine free of grass, leaves, excessive grease, oil and dirt.

7.Park the machine on level ground.

8.NEVER allow untrained personnel to service the machine.

9.Use care when checking blades. Use a Blade Buddy, wrap the blade(s) or wear gloves and USE CAUTION when servicing blades. Only replace blades. NEVER straighten or weld blades.

10.Keep all parts in good working condition. Replace all worn or damaged decals.

11.Use jack stands to support components when required.

12.Carefully release pressure from components with stored energy.

WARNING

Hydraulic fluid is under high pressure and can penetrate skin causing injury. If hydraulic fluid is injected into the skin, it must be surgically removed within a few hours by a doctor or gangrene may result.

Keep body and hands away from pinholes or nozzles that eject hydraulic fluid under high pressure.Use paper or cardboard and not hands to search for leaks.

Safely relieve all pressure from the hydraulic system by placing the control levers in the neutral lock position and shutting off the engine before performing any work on the hydraulic system.

If you need service on your hydraulic system, please see your authorized Scag dealer.

13.Let the engine cool before storing.

14.DO NOT store the machine near an open flame.

15.Shut off fuel while storing or transporting.

16.DO NOT store fuel near flames or drain indoors.

6

Page 9 Page 11
Image 10
Page 9 Page 11
Contents OPERATOR’S Manual Remember Your Mower is only AS Safe AS the Operator Table of Contents Limited Warranty Commercial Equipment Following SectionDirection Reference General InformationIntroduction Servicing The Engine And Drive Train ComponentsSymbols Symbol DescriptionSignal Words Safety InformationBefore Operation considerations Operation Considerations Slope Angle Graph Maintenance Considerations & storage Front Tie Down PointsUsing a spark arrestor SPARK Ignition SystemSafety and Instructional Decals 483402 483407Electrical SpecificationsEngine Engine DeckCutter Deck Weights and Dimensions SvR-61vProductivity Operating Instructions Controls and Instrument IdentificationInitial RUN-IN Procedures Safety Interlock SystemStarting the Engine Forward Travel Ground Travel and SteeringReverse Travel Engaging the Deck Drive Cutter Blades Forward / Reverse ControlsParking the Mower Hillside OperationAfter Operation Removing Clogged MaterialMoving Mower with Engine Stopped Adjusting Cutting HeightRecommendations for Mowing Troubleshooting Cutting Conditions Condition Cause CureTroubleshooting Cutting Conditions Contd Scalping Blades Hitting Parking brake adjustment AdjustmentsTravel adjustment Neutral adjustment Tracking adjustmentCutter deck adjustments Throttle Control and Choke AdjustmentsBelt Adjustments Belt AlignmentCutter deck level Cutter deck pitchCutter Deck Height Adjustment Cutter deck heightCustom-Cut Baffle Adjustment Custom-Cut Baffle Adjustment Mounting Slot Selected Electric clutch adjustment FrONT Weight AdjustmentOperator Cushion adjustment 11. Front Weight Adjustment12. Operator Cushion Adjustment Maintenance Maintenance Chart Recommended Service IntervalsMaintenance Chart Recommended Service Intervals Contd LubricationLubrication Fitting Points Checking Hydraulic Oil Level Hydraulic SystemChanging Hydraulic Oil Changing Hydraulic Oil Filter Element Engine OilChanging Engine Crankcase Oil Changing Engine Oil FilterFilling the Fuel Tank Engine Fuel SystemReplacing In-Line Fuel Filter Elements Battery eLECTRIC Start Models Engine Air CleanerCleaning and/or Replacing Air Cleaner Element Jump Starting Charging the BatteryCutter Blades Blade InspectionBlade Replacement TiresBody and deck Section Illustrated Parts List Scag Approved Attachments and Accessories61V Cutter Deck Description SVR-61V Cutter Deck Controls Three Weights Installed SVR-61V Sheet Metal Components Brake Shaft Support SVR-61V Steering Controls Brake Lever w/Grip SVR-61V SVR-61V Fuel System EPA Phase SVR-61V Fuel System EPA Phase Models produced after to 1/1/2011 Hose, Vapor Recovery 3/16 order by inch SVR-61VHYDRAULICS and Engine Components SVR-61V Hydraulics and Engine Components Electrical System Instrument Panel w/Decal Switch, PTO 10 Amp 48798 Heavy-Duty Commercial Replacement Decals and Information Plates SVR Electrical Schematic Limited Warranty Commercial Equipment

SVR61V-29FX specifications

The Scag Power Equipment SVR61V-29FX is a standout in the realm of commercial-grade zero-turn mowers, designed to meet the demanding needs of lawn care professionals and discerning homeowners alike. This powerful machine is engineered to deliver exceptional performance, efficiency, and durability, making it a reliable choice for a variety of mowing applications.

At the heart of the SVR61V-29FX is a robust 29-horsepower Kawasaki FX series engine. This powerful engine is known for its reliability and superior performance, allowing for smooth operation and optimal cutting capabilities. The advanced air filtration system ensures that the engine operates efficiently, prolonging its life while maintaining peak performance.

One of the signature features of the SVR61V-29FX is its 61-inch Velocity Plus cutting deck. This innovative deck design is optimized for maximum airflow and cutting efficiency, allowing for a precise and clean cut even in tough mowing conditions. The heavy-duty, welded steel construction of the deck ensures durability and longevity, reducing the risk of damage over time. The deck's height is easily adjustable, providing users with the flexibility to choose their desired cutting height for various grass types.

The SVR61V-29FX is equipped with hydrostatic transmission, providing seamless control and speed management. The intuitive dual-lever steering system allows for precise maneuverability, making it easy to navigate around obstacles and tight spaces. This zero-turn capability enhances productivity by reducing the time it takes to mow large areas, a key feature for professionals seeking efficiency.

In terms of operator comfort, the SVR61V-29FX boasts a comfortable, plush seat with armrests that support extended usage without fatigue. The ergonomic design of the controls further enhances the user experience, allowing operators to efficiently manage mowing tasks without unnecessary strain.

Additionally, the SVR61V-29FX is built with a rugged frame and heavy-duty components, designed to withstand the rigors of frequent use. Scag’s commitment to quality ensures that this mower is not just a workhorse but also a long-term investment for its users.

Overall, the Scag Power Equipment SVR61V-29FX combines powerful performance, cutting-edge technology, and user-focused design characteristics, making it an exceptional choice for anyone looking to achieve professional-grade mowing results. Its combination of power, precision, and comfort sets it apart in the competitive landscape of zero-turn mowers.
Top Page Image Contents