Scag Power Equipment SVR61V-29FX manual Specifications, Electrical, Engine Deck

Page 13

Section 3

R

 

 

SPECIFICATIONS

3.1 ENGINE

 

General Type

Heavy Duty Industrial/Commercial Gasoline

Brand

Kawasaki

Horsepower:

 

(Scag Model SVR61V-29FX)

29 HP (Engine Model # FX801V)

Cylinders

2 with Cast-Iron Sleeves

Governor

Mechanical Type with Variable Speed Control Set At 3600 RPM (+/- 100 RPM)

Idle Speed:

 

Kawasaki

1550 RPM (+/- 150 RPM)

Fuel

Non-Leaded Gasoline with a Minimum Octane Rating of 87

Oil Pump

varies - see engine manufacturer's specifications

Starter:

 

Kawasaki

Electric Starting with solenoid shift starter

3.2 Electrical

 

Starter

12-Volt Electric Ring Gear Type, Key and Solenoid Operated Interlock

Interlock Switches

Operator Presence, Mower Engagement (BBC), Neutral Lever

Instrument Panel

Key Switch, Throttle Lever, Choke Lever, PTO Switch, Hour Meter and Neutral Lever

3.3 ENGINE DECK

 

Drive System

Hydraulic Drive with Two Variable Displacement Pumps

 

and Two Cast-Iron High Torque Wheel Motors

Hydraulic Pumps

Two Hydro-Gear model PK Series 12 cc. Hydraulic Pumps

 

with Dump Valves for movement without the engine running

Hydraulic Drive Motors

Two Parker Model TE Cast-Iron Wheel Motors

Steering/Travel Control

Twin Lever Steering Control with Individual Control to Each Wheel

Parking Brake

Lever Actuated Linkage to Brakes on Both Drive Wheels

Wheels:

 

(2) Front Caster

13 x 6.50 - 6 Flat-Free w/Roller Bearings

(2) Drive -

20 x 10 - 8 Four-Ply Pneumatic Tubeless, Radius Edge

Tire Pressure:

 

Front Caster

Flat-Free

Drive

12 PSI

Fuel Tank

8 Gallon Seamless Polyethylene Tank with Large Opening,

 

Fuel Cap, Fuel Gauge and Integrated Cup Holder

Travel Speed:

 

Forward

0 up to 11 MPH

Reverse

0 up to 6.0 MPH

-NOTE- The machine will travel at 11 mph for transport purposes. For best cutting performance the forward travel speed should be adjusted depending upon the cutting conditions.

9

Image 13
Contents OPERATOR’S Manual Remember Your Mower is only AS Safe AS the Operator Table of Contents Following Section Limited Warranty Commercial EquipmentIntroduction General InformationDirection Reference Servicing The Engine And Drive Train ComponentsSymbol Description SymbolsSignal Words Safety InformationBefore Operation considerations Operation Considerations Slope Angle Graph Front Tie Down Points Maintenance Considerations & storageSPARK Ignition System Using a spark arrestor483402 483407 Safety and Instructional DecalsEngine SpecificationsElectrical Engine DeckCutter Deck Weights and Dimensions SvR-61vProductivity Controls and Instrument Identification Operating InstructionsInitial RUN-IN Procedures Safety Interlock SystemStarting the Engine Forward Travel Ground Travel and SteeringReverse Travel Forward / Reverse Controls Engaging the Deck Drive Cutter BladesAfter Operation Hillside OperationParking the Mower Removing Clogged MaterialMoving Mower with Engine Stopped Adjusting Cutting HeightRecommendations for Mowing Condition Cause Cure Troubleshooting Cutting ConditionsTroubleshooting Cutting Conditions Contd Scalping Blades Hitting Parking brake adjustment AdjustmentsTravel adjustment Tracking adjustment Neutral adjustmentBelt Adjustments Throttle Control and Choke AdjustmentsCutter deck adjustments Belt AlignmentCutter deck pitch Cutter deck levelCutter deck height Cutter Deck Height AdjustmentCustom-Cut Baffle Adjustment Custom-Cut Baffle Adjustment Mounting Slot Selected FrONT Weight Adjustment Electric clutch adjustment11. Front Weight Adjustment Operator Cushion adjustment12. Operator Cushion Adjustment Maintenance Chart Recommended Service Intervals MaintenanceLubrication Maintenance Chart Recommended Service Intervals ContdLubrication Fitting Points Checking Hydraulic Oil Level Hydraulic SystemChanging Hydraulic Oil Changing Engine Crankcase Oil Engine OilChanging Hydraulic Oil Filter Element Changing Engine Oil FilterFilling the Fuel Tank Engine Fuel SystemReplacing In-Line Fuel Filter Elements Battery eLECTRIC Start Models Engine Air CleanerCleaning and/or Replacing Air Cleaner Element Cutter Blades Charging the BatteryJump Starting Blade InspectionTires Blade ReplacementBody and deck Section Scag Approved Attachments and Accessories Illustrated Parts List61V Cutter Deck Description SVR-61V Cutter Deck Controls Three Weights Installed SVR-61V Sheet Metal Components Brake Shaft Support SVR-61V Steering Controls Brake Lever w/Grip SVR-61V SVR-61V Fuel System EPA Phase SVR-61V Fuel System EPA Phase Models produced after to 1/1/2011 Hose, Vapor Recovery 3/16 order by inch SVR-61VHYDRAULICS and Engine Components SVR-61V Hydraulics and Engine Components Electrical System Instrument Panel w/Decal Switch, PTO 10 Amp 48798 Heavy-Duty Commercial Replacement Decals and Information Plates SVR Electrical Schematic Limited Warranty Commercial Equipment

SVR61V-29FX specifications

The Scag Power Equipment SVR61V-29FX is a standout in the realm of commercial-grade zero-turn mowers, designed to meet the demanding needs of lawn care professionals and discerning homeowners alike. This powerful machine is engineered to deliver exceptional performance, efficiency, and durability, making it a reliable choice for a variety of mowing applications.

At the heart of the SVR61V-29FX is a robust 29-horsepower Kawasaki FX series engine. This powerful engine is known for its reliability and superior performance, allowing for smooth operation and optimal cutting capabilities. The advanced air filtration system ensures that the engine operates efficiently, prolonging its life while maintaining peak performance.

One of the signature features of the SVR61V-29FX is its 61-inch Velocity Plus cutting deck. This innovative deck design is optimized for maximum airflow and cutting efficiency, allowing for a precise and clean cut even in tough mowing conditions. The heavy-duty, welded steel construction of the deck ensures durability and longevity, reducing the risk of damage over time. The deck's height is easily adjustable, providing users with the flexibility to choose their desired cutting height for various grass types.

The SVR61V-29FX is equipped with hydrostatic transmission, providing seamless control and speed management. The intuitive dual-lever steering system allows for precise maneuverability, making it easy to navigate around obstacles and tight spaces. This zero-turn capability enhances productivity by reducing the time it takes to mow large areas, a key feature for professionals seeking efficiency.

In terms of operator comfort, the SVR61V-29FX boasts a comfortable, plush seat with armrests that support extended usage without fatigue. The ergonomic design of the controls further enhances the user experience, allowing operators to efficiently manage mowing tasks without unnecessary strain.

Additionally, the SVR61V-29FX is built with a rugged frame and heavy-duty components, designed to withstand the rigors of frequent use. Scag’s commitment to quality ensures that this mower is not just a workhorse but also a long-term investment for its users.

Overall, the Scag Power Equipment SVR61V-29FX combines powerful performance, cutting-edge technology, and user-focused design characteristics, making it an exceptional choice for anyone looking to achieve professional-grade mowing results. Its combination of power, precision, and comfort sets it apart in the competitive landscape of zero-turn mowers.