Scag Power Equipment SVR61V-29FX manual Operator Cushion adjustment, Front Weight Adjustment

R

Section 6

Additional weight can be added to the front of the machine if needed. See Figure 6-11.

1.Remove the front belt from the machine.

2.Remove the mounting hardware securing the weight(s) to the front of the machine.

3.Add the desired weight to the machine and secure using the recommended hardware. See Figure 6-11.

4.Reinstall the front belt cover.

1/2-13 ELASTIC	1	- WEIGHT FOR 48” / 52” / 61“
STOP NUT
	2	- WEIGHTS FOR 36”
	3	- OPTIONAL FOR ALL MODELS

1/2-13 x 2-3/4” (ONE WEIGHT) 1/2-13 x 4-1/2” (TWO WEIGHTS) 1/2-13 x 5-1/2” (THREE WEIGHTS)

Figure 6-11. Front Weight Adjustment

6.9 OPERATOR CUSHION adjustment

The operator cushion can be mounted in twelve (12) different positions to fit a wide range of operators. See Figure 6-12.

1.Remove the hardware securing the operator cushion to the mounting bracket and set the cushion aside.

2.Remove the hardware securing the mounting bracket.

3.Install and secure the mounting bracket in the desired operating location. Locations A, B or C for lower mounting positions or rotate the mounting bracket 180 degree and install in G for higher mounting positions. See Figure 6-12.

4.Install and secure the operator cushion in the desired location. Locations D, E or F for the lower mounting positions or H, I or J for the higher mounting positions. See Figure 6-12.

28