Remington Power Tools BS1812A TRIMMER/EDGER Maintenance, Cleaning Maintenance, Replacement Parts

Page 11

TRIMMER/EDGER MAINTENANCE

CLEANING AND

MAINTENANCE

WARNING:

Remove battery before cleaning or servicing. Severe injury or death could occur from fire, elec- trical shock, or rotating string.

WARNING:

When cleaning trimmer/ edger:

Do not submerse in any liquids

Do not use products that contain Ammonia, Chlo- rine, or abrasives

Do not use chlorinated cleaning solvents, Carbon Tetrachloride,Kerosene,or Gasoline.

Use a soft cloth dampened with a mild soap and water mixture to wipe trimmer/edger housing. Do not spray or pour water directly onto trim- mer/edger.

Use a stiff bristled brush to clean air intake openings on housing (see Figure 31).

When not in use, store the trimmer/edger indoors in a dry location.

WARNING:

Use of non-Remington parts or accessories may cause personal injury or damage to the unit.

REPLACEMENT PARTS

1.

Battery

RB18V1

2.

Extemded Run Battery

RBE18V1

3.

Battery Charger

121397-01

4.

Replacement Spool

BRS65A

 

(Includes line)

 

OPTIONAL ACCESSORY

 

1.

1-Hour Charger

RC18V1

For original replacement parts and accessories, contact your nearest Authorized Dealer or Au- thorized Service Center for this product. If they can not supply the part or accessory, contact your nearest Parts Central listed on page 42. Each Authorized Dealer, Authorized Service Center, and Parts Central is independently owned and operated. You may also order parts from the "Online Outlet" at www.remington- powertools.com. If they cannot supply the part contact our customer service department at 1-800-626-2237.

In Canada call 1-800-561-3372 for parts infor- mation.

You may also order the parts from the "Online

Outlet" at www.remingtonpowertools.com.

BATTERY DISPOSAL AND RECYCLING

This product uses nickel-cadnium batteries. Local, state, or federal laws prohibit disposal of nickel-cadnium batteries in the ordinary trash.

To help protect the environment and conserve natural resources, please dispose of batteries properly. You may contact your local recy- cling center for information on where to drop off the batteries.

TECHNICAL SERVICE

You may have further questions about as- sembling, operating, or maintaining this trimmer/edger. If so, you can visit our Technical Service web site at www.rem- ingtonpowertools.com or contact our Technical Service Department at 1-800-626- 2237 (English only).

You may also write to:

DESA Power Tools

ATTN: Technical Service Specialty Products

P.O. Box 90004

Bowling Green, KY 42102-9004

When contacting DESA Power Tools have ready:

Your Name

Your Address

Your Phone Number

Model Number of Product

Date of Purchase (include copy of receipt for written requests)

Always specify model and serial numbers when writing the factory.

Wereservetherighttoamendthesespecifications at any time without notice. The only warranty applicable is our standard written warranty. We make no other warranty, expressed or implied.

ENGLISH

Figure 31 - Cleaning trimmer/edger hous- ing

11

www.remingtonpowertools.com

Image 11
Contents 18VOLT Cordless TRIMMER/EDGER Stop Contents Before Operating TRIMMER/EDGER Safety WarningsMaintenance and Storage of TRIMMER/EDGER Save These InstructionsProduct Identification SpecificationsCharging Battery Rechargeable BatteryProtective Battery Terminal CAP Important Charging Notes Assembling Trimmer Edger Trimmer Assembly Attaching Adjustable Front Handle Starting the TRIMMER/ Edger Adjusting Shaft Length Converting to EDGER/ TrimmerTRIMMER/EDGER Operation Operating the TRIMMER/ EdgerReplacing TRIMMER/EDGER Line Using EdgerAdvancing Trimmer Line Battery Disposal and Recycling TRIMMER/EDGER MaintenanceCleaning Maintenance Replacement PartsObserved Fault Possible Cause Remedy TroubleshootingTerms Common to ALL Warranties Warranty InformationLimited Warranties NEW Products Factory Reconditioned ProductsPage PODADORA/RECORTABORDES Inalámbrica DE 18 Voltios Mantenimiento DE LA PODADORA/RECORTABORDES Importante Información Sobre LA SeguridadEnsamble DE LA PODADORA/RECORTABORDES Operación DE LA PODADORA/RECORTABORDESMientras Opere LA Podadora Recortabordes Guarde Estas InstruccionesAdvertencias DE Seguridad Antes DE Operar LA Podadora Recortabordes18VDC Identificación DEL ProductoEspecificaciones Tapa Protectora DEL Terminal DE LA Batería Batería RecargableNotas Importantes DE Cargado Carga DE BateríaSujeción DEL Protector Y LA Rueda DE Corte Ensamble DE LA PODADORA/RECORTABORDESEnsamble DE LA Podadora Recortabordes Sujeción DEL ASA Frontal RegulableOperación DE Podadora Básica Operación DE LA PODADORA/RECORTABORDESArranque DE LA Podadora Recortabordes Avance DE LA Cuerda DE LA Podadora CorteUSO Como Recortabordes Cambio DE LA Cuerda DE LA PODADORA/ RecortabordesEliminación Y Reciclaje DE Baterías Mantenimiento DE LA PODADORA/RECORTABORDESLimpieza Y Mantenimiento Carrete DE RepuestoFalla Obsrevada Causa Posible Solución Análisis DE AveríasCondiciones Comunes a Todas LAS Garantías Garantías Limitadas Nuevos ProductosPage Guide DU Propriétaire Utilisation DU TAILLE-BORDURES / COUPE-BORDURES Table DES MatièresAssemblage DU TAILLE-BORDURES / COUPE-BORDURES Pendant L’UTILISATION DU TAILLE-BORDURES / COUPE- Bordures Mises EN Garde DE SécuritéAvant D’UTILISER LE TAILLE-BORDURES / COUPE- Bordures Fiche Technique Identification DU ProduitMises EN Garde DE Sécurité Pile RechargeableCapuchon DE Protection DES Bornes DE LA Pile Remarques Importante SUR LA Recharge Recharge DE LA PileMise EN Place DE LA Poignée Avant Réglable Assemblage DU TAILLE-BORDURESAssemblage DU TAILLE- Bordures / COUPE- Bordures Mise EN Place DU Protecteur ET DU Disque DE CoupeUtilisation DU TAILLE- Bordures / COUPE- Bordures Utilisation DU TAILLE-BORDURES / COUPE-BORDURESTaille des bordures Mise EN GardeUtilisation DU COUPE-BORDURES Remplacement DU FILPièces DE Rechange Service TechniqueEntretien DU TAILLE-BORDURES / COUPE-BORDURES Entretien ET NettoyageDéfaillance Ovservée Cause Possible Remède DépannageProduits Neufs Garanties LimitéesParts Central / Central DE Piezas / Dépôt DE Pièces Page 122042-01 REV.B 07/08