Remington Power Tools 100089-06A, ES1512US Items Needed to Sharpen Chain, Sharpening Cutters

Page 15

CLEANING AND MAINTENANCE

Items Needed to Sharpen Chain

Purchase these items from your local dealer, hard- ware store, or chain saw supplies outlet.

•5/32" round file

•Depth gauge tool

•File guide

•Vise

•Medium sized flat file

Sharpening Cutters

Use file guide for 30° filing.

1.

Adjust chain for proper tension (see Saw Chain

 

Tension Adjustment).

2.

Clamp guide bar in vise to hold saw steady.

 

Note: Do not clamp chain.

3.

Press 5/32" round file (attached to file guide)

 

into groove between top plate and depth gauge

 

on chain. File guide should rest on both top plate

 

and depth gauge (see Figure 18). Note: File at

 

midpoint of guide bar.

Filing Direction

30° Guide Mark

File Guide

5/32" Round

File

Note: This illustration shows file guide placement and filing direction for sharpening cutters on left side of chain.

Figure 18 - File and File Guide Placement On Chain

ENGLISH

4. Hold file guide level. Make sure 30° mark on

file guide is parallel to center of guide bar (see

Figure 18). This will insure that you file cutters

Depth Gauge (left side of chain)

Depth Gauge (right side of chain)

 

at 30° angle.

5.

File from inside towards outside of cutter until

 

sharp. Only file in this one direction (see Figure

 

18). Note: Two or three strokes with file should

 

sharpen cutter.

6.

After each cutter is sharpened, move chain for-

 

ward to sharpen next cutter. File all cutters on

 

one side of chain.

7.

Move to other side of chain and repeat process.

Filing Cutter Depth Gauges

The cutter depth gauge clearance is reduced as cutters are sharpened. After every second or third sharpen- ing, reset cutter depth gauges.

1.Place depth gauge tool (.025") firmly across top of two cutters. Make sure depth gauge enters slot in depth gauge tool (see Figure 20).

2.Use medium flat file. File depth gauge level with depth gauge tool.

3.Remove depth gauge tool. With flat file, round off front corner of cutter depth gauge (see Figure 21).

After several hand filings, have authorized service center or sharpening service machine sharpen chain. This will insure even filing.

Groove

Groove

Top Plate

(left side of chain)

Top Plate

(right side of chain)

Right Side of Chain

Figure 19 - Chain Part Locations

Flat File

Depth Gauge

Depth Gauge

Tool

Depth Gauge Slot

Figure 20 - Depth Gauge Tool On Chain

Front Corner

.025"

.635 mm

Figure 21 - Round Off Front Corner Of Depth Gauge

15

www.remingtonpowertools.com

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Models Electric Chain SAWCall 1-800-626-2237 for Technical Assistance Stop Para ArrétEnglish ContentsRead ALL Instructions Important Safety InformationBefore Operating SAW While Operating SAWKickback Kickback Safety Devices On This SawRemove all items from carton Saw Maintenance and Kickback SafetyMaintenance and Storage Chain SAW UnpackingChain SAW Names and Terms Product IdentificationImportant Do not clamp chain saw in vise during assembly AssemblyTurning Adjusting Screw SAW Chain Tension AdjustmentExtension Cords Operating Chain SAW Filling OIL TankOiling Chain Cutting with the Chain SAWBefore Felling a Tree Felling Procedure Felling NotchOperating Chain SAW Felling a Tree Cutting Down a TreeLimbing a Tree Bucking a LOGFollow directions on page 13 to buck a log Trimming a Tree Pruning Entire Length Of Log On GroundLog Supported On One End Log Supported On Both EndsCare of Guide BAR Cleaning and MaintenanceCleaning SAW Body Normal Guide Bar MaintenanceItems Needed to Sharpen Chain Sharpening CuttersFiling Cutter Depth Gauges Storage Technical ServiceReplacement Parts and Accessories Repair ServiceObserved Fault Possible Cause Remedy TroubleshootingBowling Green, KY M8W 1T2 Warranty InformationRemington Brand Electric Chain SAW Limited Warranties BoxModelos Sierra EléctricaLimpieza Y Mantenimiento Información Importante DE SeguridadAntes DE Utilizar LA Sierra AL Utilizar LA SierraLEA Todas LAS Instrucciones Contragolpes Lleve la sierra eléctrica de un lugar a otroCon el dedo fuera del gatillo Cuide de su sierra eléctrica Nunca la exponga a la lluvia DesembalajeMantenimiento de la cadena y seguridad contra contragolpes Mantenimiento Y Almacenamiento DE SU Sierra EléctricaIdentificación DEL Producto TerminologíaRueda dentada Rueda dentada que impulsa la cadena Figura 2- Ensamble de la Barra Guía, Cadena EnsamblajeFigura 4 Girando el Tornillo de Regulación Ajuste DE Tensión DE LA Cadena SerradaLubricación DE LA Cadena USO DE LA Sierra EléctricaLubricación Cables DE ProlongaciónDespeje el área de trabajo alrededor del árbol Tala DE UN Árbol Derribamiento de un árbolAntes de derribar un árbol AdvertenciaCorte en dirección a la muesca Procedimiento de tala Corte de la muescaTala final Desmembramiento DE UN ÁrbolSiga estas instrucciones para trozar un tronco La totalidad del tronco sobre el sueloTronco apoyado en un extremo Trozado DE UN TroncoTronco apoyado sobre ambos extremos Poda DE UN ÁrbolLa presión del tronco Afilado DE LA Cadena Limpieza Y MantenimientoLimpieza DEL Cabezal Cuidado DE LA Barra DE GuíaLimado de los calibradores de medida de profundidad Afilado de los elementos de corteServicio DE Reparación AlmacenamientoServicio Técnico Accesorios Y Piezas DE RepuestoFalla Observada Causa Posible Solución Diagnóstico Y Resolución DE ProblemasInformación DE Garantía Akron RoadBox Toronto, Ontario M8W 1T2 Bowling Green, KY 100089-06A, ES1512US, ES1514US, ES1514AS ModèlesNettoyage ET Entretien Consignes DE Sécurité ImportantesLisez Toutes LES Instructions Consignes DE Sécurité ImportantesAvant D’UTILISER LA Tronçonneuse Pendant Lutilisation DE LA TronçonneuseRecul Entretien de la tronçonneuse et protection contre le recul Entretien ET Remisage DE LA TronçonneuseFaire très attention quand on repénètre dans une entaille Déballage Identification DU ProduitAbattage Coupe d’un arbre Vocabulaire DE LA TronçonneuseAssemblage du guide-chaîne, de la chaîne et du protège-main MontageComment tourner la vis de réglage Réglage DE LA Tension DE LA ChaîneSciage Avec LA Tronçonneuse Utilisation DE LA TronçonneuseRallonges Électriques Lubrification DE LA ChaîneAbattage D’UN Arbre Avant d’abattre un arbreAvertissement Procédure d’abattage Sifflet d’abattage Trait d’abattageÉbranchage La bille est soutenue aux deux Toute la bille repose au solTronçonnage D’UNE Bille La bille est soutenue à une extrémitéCoupe dune branche Taille D’UN Arbre ÉlagageEntretien normal de la guide-chaîne Nettoyage ET EntretienNettoyage DU Carter DE Tronçonneuse Entretien DE LA GUIDE-CHAÎNERemarque Limer au milieu de la guide-chaîne Outils nécessaires pour affûter la chaîneAffûtage des taillants Limage des limiteurs de profondeur des taillantsRemplacement DE LA Chaîne Service TechniquePièces DE Rechange ET Accessoires Service DE RéparationDéfaillance Cause Possible Remède Observée DépannageBox Bowling Green, KY Information SUR LA GarantiePage Gear, Drive II 20DP Parts LIST/LISTA DE REPUESTOS/LISTE DES PiècesParts CENTRAL/CENTRAL DE PIEZAS/DÉPÔT DE Pièces Page 120877-01 Rev. C 02/08

ES1514US, ES1514AS, ES1512US, 100089-06A specifications

Remington Power Tools stands as a prominent name in the arena of outdoor equipment, particularly known for their lawn and garden tools that combine efficiency, power, and ease of use. Four standout models in their lineup are the 100089-06A, ES1512US, ES1514AS, and ES1514US. Each of these tools showcases unique features catering to diverse user needs while maintaining Remington's reputation for quality.

The Remington 100089-06A is particularly appreciated for its remarkable versatility. This model comes equipped with a powerful 33cc two-cycle engine, making it an excellent choice for tackling tough yard tasks. The user-friendly design ensures easy start-up, and the ergonomic handle reduces user fatigue, allowing for prolonged operation without discomfort. Additionally, its attachment capability allows users to customize the tool based on their specific gardening needs.

Moving on to the ES1512US, this electric chainsaw is engineered for precision cutting. It features a robust 12-amp motor that provides sufficient power for various cutting tasks. The tool's lightweight design makes it accessible for both seasoned professionals and novice users. Its low kickback 12-inch bar and chain ensure safety while delivering smooth and efficient cuts. Plus, the tool is equipped with a tool-less chain tensioning system, allowing for easy adjustments on the fly.

The ES1514AS is another electric chainsaw, but with enhanced specifications. It steps up with a 14-inch bar, making it ideal for larger branches and logs. This model also carries a 15-amp motor, which enhances its cutting power substantially. One of its key technologies is the automatic oiler, which ensures that the chain remains lubricated, reducing friction and extending the life of the tool. It’s designed to operate quietly, making it a great choice for residential areas.

Lastly, the ES1514US shares many features with the ES1514AS but is distinguished by its extended user-friendly characteristics, ensuring maximum efficiency and comfort. With an ergonomic handle and a lightweight design, it provides the convenience needed for extended periods of work without fatigue. Both ES1514 models boast a safety brake feature that immediately halts the chain movement upon encountering resistance, further ensuring user safety.

In conclusion, Remington's 100089-06A, ES1512US, ES1514AS, and ES1514US showcase a blend of power, safety, and user-friendly innovations. Each tool is tailored to meet different gardening and lawn care needs, making them invaluable assets for both casual gardeners and dedicated landscapers alike.
Top Page Image Contents