Remington Power Tools Important Safety Information, Before Operating SAW, While Operating SAW

Page 2

IMPORTANT SAFETY INFORMATION

WARNING: When using an electric chain saw, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

READ ALL INSTRUCTIONS.

Make sure you read and understand all in- structionsinImportant Safety Information on pages 2 through 4.Improper use of this chainsawcancausesevereinjuryordeath from fire, electrical shock, body contact with moving chain, or falling wood.

BEFORE OPERATING SAW

1.Read and understand this owner’s manual before operating chain saw.

2.Watch what you are doing. Use common sense. Do not operate saw when you are tired.

3.Use chain saw for cutting wood only. Do not use chain saw for purpose not intended. Do not use for cutting plastic, masonry, etc.

4.Only well-instructed adults should operate chain saw. Never allow children to operate chain saw.

5.Use only electrical voltage noted on model plate of chain saw.

6.Use only extension cords marked for outdoor use. See page 17 for extension cord requirements.

7.Do not operate chain saw

•while under the influence of alcohol, medica- tion, or drugs

•in rain or in damp or wet areas

•where highly flammable liquids or gases are present

•if saw is damaged, adjusted wrong, or not fully and securely assembled

•if trigger does not turn saw on and off. Chain must stop moving when you release trigger. Have faulty switch replaced by authorized ser- vice center (see Technical Service, page 21).

•while in a hurry

•while in tree or on a ladder unless trained to do so

8.Wear snug-fitting clothes when operating chain saw. Do not wear loose clothing or jewelry. They can get caught in moving saw chain.

9.Wear the following safety gear when operating chain saw.

•heavy-duty gloves (wear rubber gloves when working outdoors)

•steel-toed safety footwear with non-skid soles

•eye protection such as safety glasses, goggles, or face screen

•safety hard hat

•ear mufflers or ear plugs

•hair covering to contain long hair

•face or dust mask (if working in dusty areas)

10.Before cutting, always provide the following:

•clear work area

•secure footing

•planned retreat path from falling tree

11.Inspect tree before cutting down. Make sure there are no dead limbs or branches that may fall on you.

12.To reduce the risk of electric shock, this saw has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet of your extension cord, reverse the plug. If it still does not fit, a polarized extension cord will be necessary. Do not change the plug in any way.

WHILE OPERATING SAW

1.Stay alert. Use common sense while operating chain saw.

2.Keep work area clean. Cluttered areas invite injuries.

3.Be aware of extension cord while operating chain saw. Be careful not to trip over cord. Keep cord away from chain and operator at all times.

4.Keep children, animals, and bystanders away from chain saw and extension cord. Only chain saw user should be in work area.

5.Do not cut down a tree unless you are trained or have expert help.

6.If two or more persons perform bucking and fell- ing operations at the same time, provide plenty of distance between operations. Provide distance of at least twice the height of tree being felled.

7.Secure wood you are cutting by using clamps or chocks.

8.Grip chain saw firmly with both hands. Never operate chain saw with one hand. Never use hand guard as handle.

9.Keep finger off trigger until ready to make cut.

10.Before starting chain saw, make sure chain is not touching anything.

11.To guard against electrical shock, avoid body contact with grounded objects such as pipes, fences, and metal posts.

12.Keep all parts of body away from chain when saw is running.

13.Do not force chain saw while cutting. Apply light pressure. It will do the job better and safer at the rate for which it was intended.

14.Cut small brush and saplings with extreme care. Slender material may catch in chain and be whipped toward you. This could also pull you off balance.

15.When cutting limb or tree trunk that is under tension, use extreme caution. Be alert for wood springing back. When wood tension is released,

www.desatech.com

2

108539

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Manual Para EL Usuario Manuel D’UTILISATION ET D’ENTRETIEN MODELS/MODELOS/MODÈLESWhile Operating SAW Important Safety InformationBefore Operating SAW Read ALL InstructionsMaintenance and Storage of Chain SAW Kickback Safety Devices On This SawSaw Maintenance and Kickback Safety KickbackA dry place Información Importante DE SeguridadAntes DE Utilizar LA Sierra LEA Todas LAS InstruccionesLleve la sierra eléctrica de un lugar a otro AL Utilizar LA SierraContragolpes Con el dedo fuera del gatilloCuide de su sierra eléctrica Nunca la exponga a la lluvia Mantenimiento de la cadena y seguridad contra contragolpesMantenimiento Y Almacenamiento DE SU Sierra Eléctrica Pendant Lutilisation DE LA Tronçonneuse Consignes DE Sécurité ImportantesAvant D’UTILISER LA Tronçonneuse Lisez Toutes LES InstructionsSuite Entretien ET Remisage DE LA Tronçonneuse ReculEntretien de la tronçonneuse et protection contre le recul FIGURES/FIGURAS/FIGURES ’utilisation sécuritaire et correcte de la tronçonneuseFIGURES/FIGURAS/ Figures FIGURES/FIGURAS Limbing a Tree Guide Bar Cross Section Showing Uneven Bar Wear Chain SAW Names and Terms Electric Chain SAWUnpacking Remove all items from cartonImportant Do not clamp chain saw in vise during assembly AssemblySAW Chain Tension Adjustment Extension Cords Filling OIL TankOperating Chain SAW Oiling ChainBefore Felling a Tree Felling Procedure Felling NotchFelling a Tree Cutting Down a Tree Felling CutTrimming a Tree Pruning Limbing a TreeBucking a LOG Care of Guide BAR Cleaning MaintenanceCleaning SAW Body Sharpening SAW ChainStorage Technical ServiceReplacement Parts and Accessories Filing Cutter Depth GaugesNON-WARRANTY Service Repair ServiceWarranty Service Pole SAW AssemblyTroubleshooting Observed Fault Possible Cause RemedyIndustries of Canada, Inc Electric Chain SAW Limited WarrantyModel Date Purchased Terminología Sierra EléctricaDesembalaje EnsamblajeAjuste DE Tensión DE LA Cadena Serrada Cables DE Prolongación LubricaciónUSO DE LA Sierra Eléctrica Lubricación DE LA CadenaProcedimiento de tala Corte de la muesca Tala DE UN Árbol Derribamiento de un árbolAntes de derribar un árbol Tala finalLa totalidad del tronco sobre el suelo Desmembramiento DE UN ÁrbolTrozado DE UN Tronco Siga estas instrucciones para trozar un troncoTronco apoyado sobre ambos extremos Limpieza Y MantenimientoTronco apoyado en un extremo Poda DE UN ÁrbolCuidado DE LA Barra DE Guía Afilado DE LA CadenaAccesorios Y Piezas DE Repuesto AlmacenamientoServicio Técnico Recambio DE LA Cadena SerradaServicio SIN Garantía Servicio DE ReparaciónServicio CON Garantía Diagnóstico Y Resolución DE Problemas Falla Observada Causa Posible SoluciónGarantía Limitada DE Sierra Eléctrica Modelo Fecha de compraVocabulaire DE LA Tronçonneuse Tronçonneuse Électrique PrimeDéballage MontageÉtendez la chaîne, bien à plat Réglage DE LA Tension DE LA ChaîneRemplissage DU Réservoir D’HUILE Lubrification DE LA Chaîne Utilisation DE LA TronçonneuseRallonges Électriques Sciage Avec LA TronçonneuseProcédure d’abattage Sifflet d’abattage Abattage D’UN ArbreAvant d’abattre un arbre Trait d’abattageToute la bille repose au sol ÉbranchageTronçonnage D’UNE Bille La bille est soutenue à une extrémitéNettoyage DU Carter DE Tronçonneuse Nettoyage ET EntretienTaille D’UN Arbre Élagage Entretien DE LA GUIDE-CHAÎNEAffûtage DE LA Chaîne Remplacement DE LA ChaîneRemisage Numéro De pièce Description Service TechniquePièces DE Rechange ET Accessoires 104301S Chaîne, 20,3 cm 8 po 075752 Pignon d’entraînementService Hors Garantie Service DE RéparationService Sous Garantie Dépannage Défaillance Observée Cause Possible RemèdeModèle Date dachat Information SUR LA GarantieGarantie Limitée Pour LA Tronçonneuse Électrique Parts CENTRAL/CENTRAL DE PIEZAS/DÉPÔT DE Pièces LNT-2 Parts LIST/LISTA DE REPUESTOS/LISTE DES Pièces 113614-01108539 108539 108539-01 Rev. K 10/05

104316-04, 104316-04, 104316-05, 106890-01, 106890-02, 108526-01, 104317, 106821, 106821A, 106890-01 specifications

Remington Power Tools has established a reputation for providing high-quality outdoor power equipment, and their latest lineup includes a range of innovative models such as the 106890-01, 104316-04, 104316-05, 106890-02, 108526-01, 104317, 106821, and 106821A. These products are designed to enhance user experience while delivering reliable performance in various landscaping and yard maintenance tasks.

One of the standout models, the Remington 106890-01, features a powerful engine that ensures consistent performance across different terrains. This model is equipped with advanced air filtration technology, which helps in prolonging engine life and optimizing performance by reducing dust and debris entering the system. Its ergonomic design also enhances user comfort, making it easy to handle during extended use.

The 104316-04 and 104316-05 models share several characteristics, including easy-start mechanisms that allow users to begin work without hassle. Their lightweight design ensures mobility, making them ideal for homeowners and professionals alike. Both models also come with adjustable cutting widths, allowing users to customize their landscaping tasks according to specific needs.

Moving on to the 106890-02, it incorporates modern vibration-dampening technology, which significantly reduces user fatigue while working. This model is perfect for those long hours spent managing larger properties. The incorporated safety features, including automatic shut-off and safety guards, ensure that users can operate the tool with confidence.

The 108526-01 model is particularly notable for its versatility. Designed with multiple attachments, it can easily transform from a trimmer to an edger or blower, making it an all-in-one solution for various lawn and garden tasks. Its powerful motor delivers reliability across different attachments, ensuring a seamless transition during use.

The 104317 model stands out with its innovative battery technology that promises longer run times and faster charging. This feature is especially beneficial for users who prefer cordless options. Both the 106821 and 106821A models focus on energy efficiency and are fitted with eco-friendly engines that meet modern emissions standards, appealing to environmentally-conscious consumers.

In summary, Remington Power Tools continues to innovate with models like 106890-01, 104316-04, 104316-05, 106890-02, 108526-01, 104317, 106821, and 106821A. With their commitment to performance, safety, and user comfort, these power tools are set to meet the diverse needs of homeowners and landscaping professionals alike. Each model is a testament to the brand's dedication to providing durable, efficient, and user-friendly equipment that enhances outdoor living.
Top Page Image Contents