Remington Power Tools 104316-04, 106890-01 Limbing a Tree, Bucking a LOG, Trimming a Tree Pruning

Page 19

OPERATING CHAIN SAW

Continued

LIMBING A TREE

WARNING:Avoid kickback.Kickback can result in severe injury or death. See Kickback, page 3, to avoid risk of kickback.

WARNING: When cutting limb that is under tension, use extreme caution. Be alert for wood springing back. When wood tension is released, limb could spring back and strike operator causing severe injury or death.

Limbing is removing branches from a fallen tree. Make sure your footing is firm. Keep feet apart. Divide your weight evenly on both feet. Do not remove larger limbs under tree that support log off ground. Remove each limb with one cut (see Figure 12). Clear cut limbs from work area often. This will help maintain a safe work area.

Make sure you start your cut where limb will not pinch saw during cutting. To avoid pinching, start cut on freely hanging limbs from above limb. Start cut on limbs under tension from under limb. If pinch occurs, turn saw off, lift limb, and remove saw.

BUCKING A LOG

Bucking a log is cutting a log into sections. Make sure your footing is firm. Keep feet apart. Divide your weight evenly on both feet. When possible, raise log or section off ground. Do this by using limbs, logs, chocks, etc. When cutting through log, maintain control by reduc- ing cutting pressure near end of cut. Do not relax your grip on chain saw handles. Do not let moving chain touch ground. Ground will dull moving chain. After cutting through log, release trigger to turn saw off before moving saw.

Follow directions below to buck a log.

Entire Length Of Log On Ground

Cut log from top (see Figure 13).

Log Supported On One End

1.Make first cut on underside of log (see Figure 14). Use top of guide bar to make this cut. Cut 1/3 through diameter of log. This cut will keep section from splintering when cut.

2.Make second cut directly above first cut. Cut down to meet first cut. This cut will keep log from pinching guide bar and chain.

Log Supported On Both Ends

1.Make first cut from above log (see Figure 15). Cut 1/3 through diameter of log. This cut will keep section from splintering when cut.

2.Make second cut on underside of log, directly under first cut. Use top of guide bar to make this cut. Cut up to meet first cut. This will keep log from pinching guide bar and chain.

TRIMMING A TREE (PRUNING)

WARNING:Avoid kickback.Kickback can result in severe injury or death. See Kickback, page 3, to avoid risk of kickback.

WARNING:

•If on slope, make sure log will not roll down hill. Secure log by using wooden stakes. Drive wooden stakes into ground on downhill side of log. Stand on uphill side of log while cutting. Log may roll after cutting.

•Never try cutting through two logs at same time.This could increase the risk of kickback.

•While cutting log, never hold log with your hand, leg, or foot.

•While cutting log, never allow another person to hold log.

•Turn off and unplug saw before moving from one place to another.

WARNING:Avoid kickback.Kickback can result in severe injury or death. See Kickback, page 3, to avoid risk of kickback.

WARNING: Do not operate chain saw while

•in a tree

•on a ladder or any other unstable sur- face

•in any awkward position

You may lose control of saw causing severe injury.

WARNING: Do not cut limbs higher than your shoulders.

CAUTION: Seek professional help if facing conditions beyond your ability.

Continued

108539

19

www.desatech.com

Page 18 Page 20
Image 19
Page 18 Page 20
Contents MODELS/MODELOS/MODÈLES Manual Para EL Usuario Manuel D’UTILISATION ET D’ENTRETIENRead ALL Instructions Important Safety InformationBefore Operating SAW While Operating SAWKickback Kickback Safety Devices On This SawSaw Maintenance and Kickback Safety Maintenance and Storage of Chain SAWLEA Todas LAS Instrucciones Información Importante DE SeguridadAntes DE Utilizar LA Sierra A dry placeCon el dedo fuera del gatillo AL Utilizar LA SierraContragolpes Lleve la sierra eléctrica de un lugar a otroMantenimiento Y Almacenamiento DE SU Sierra Eléctrica Mantenimiento de la cadena y seguridad contra contragolpesCuide de su sierra eléctrica Nunca la exponga a la lluvia Lisez Toutes LES Instructions Consignes DE Sécurité ImportantesAvant D’UTILISER LA Tronçonneuse Pendant Lutilisation DE LA TronçonneuseSuite Entretien de la tronçonneuse et protection contre le recul ReculEntretien ET Remisage DE LA Tronçonneuse ’utilisation sécuritaire et correcte de la tronçonneuse FIGURES/FIGURAS/FIGURESFIGURES/FIGURAS/ Figures FIGURES/FIGURAS Limbing a Tree Guide Bar Cross Section Showing Uneven Bar Wear Remove all items from carton Electric Chain SAWUnpacking Chain SAW Names and TermsSAW Chain Tension Adjustment AssemblyImportant Do not clamp chain saw in vise during assembly Oiling Chain Filling OIL TankOperating Chain SAW Extension CordsFelling Cut Felling Procedure Felling NotchFelling a Tree Cutting Down a Tree Before Felling a TreeBucking a LOG Limbing a TreeTrimming a Tree Pruning Sharpening SAW Chain Cleaning MaintenanceCleaning SAW Body Care of Guide BARFiling Cutter Depth Gauges Technical ServiceReplacement Parts and Accessories StoragePole SAW Assembly Repair ServiceWarranty Service NON-WARRANTY ServiceObserved Fault Possible Cause Remedy TroubleshootingModel Date Purchased Electric Chain SAW Limited WarrantyIndustries of Canada, Inc Ensamblaje Sierra EléctricaDesembalaje TerminologíaAjuste DE Tensión DE LA Cadena Serrada Lubricación DE LA Cadena LubricaciónUSO DE LA Sierra Eléctrica Cables DE ProlongaciónTala final Tala DE UN Árbol Derribamiento de un árbolAntes de derribar un árbol Procedimiento de tala Corte de la muescaSiga estas instrucciones para trozar un tronco Desmembramiento DE UN ÁrbolTrozado DE UN Tronco La totalidad del tronco sobre el sueloPoda DE UN Árbol Limpieza Y MantenimientoTronco apoyado en un extremo Tronco apoyado sobre ambos extremosAfilado DE LA Cadena Cuidado DE LA Barra DE GuíaRecambio DE LA Cadena Serrada AlmacenamientoServicio Técnico Accesorios Y Piezas DE RepuestoServicio CON Garantía Servicio DE ReparaciónServicio SIN Garantía Falla Observada Causa Posible Solución Diagnóstico Y Resolución DE ProblemasModelo Fecha de compra Garantía Limitada DE Sierra EléctricaMontage Tronçonneuse Électrique PrimeDéballage Vocabulaire DE LA TronçonneuseRemplissage DU Réservoir D’HUILE Réglage DE LA Tension DE LA ChaîneÉtendez la chaîne, bien à plat Sciage Avec LA Tronçonneuse Utilisation DE LA TronçonneuseRallonges Électriques Lubrification DE LA ChaîneTrait d’abattage Abattage D’UN ArbreAvant d’abattre un arbre Procédure d’abattage Sifflet d’abattageLa bille est soutenue à une extrémité ÉbranchageTronçonnage D’UNE Bille Toute la bille repose au solEntretien DE LA GUIDE-CHAÎNE Nettoyage ET EntretienTaille D’UN Arbre Élagage Nettoyage DU Carter DE TronçonneuseRemisage Remplacement DE LA ChaîneAffûtage DE LA Chaîne 104301S Chaîne, 20,3 cm 8 po 075752 Pignon d’entraînement Service TechniquePièces DE Rechange ET Accessoires Numéro De pièce DescriptionService Sous Garantie Service DE RéparationService Hors Garantie Défaillance Observée Cause Possible Remède DépannageGarantie Limitée Pour LA Tronçonneuse Électrique Information SUR LA GarantieModèle Date dachat Parts CENTRAL/CENTRAL DE PIEZAS/DÉPÔT DE Pièces LNT-2 113614-01 Parts LIST/LISTA DE REPUESTOS/LISTE DES Pièces108539 108539 108539-01 Rev. K 10/05

104316-04, 104316-04, 104316-05, 106890-01, 106890-02, 108526-01, 104317, 106821, 106821A, 106890-01 specifications

Remington Power Tools has established a reputation for providing high-quality outdoor power equipment, and their latest lineup includes a range of innovative models such as the 106890-01, 104316-04, 104316-05, 106890-02, 108526-01, 104317, 106821, and 106821A. These products are designed to enhance user experience while delivering reliable performance in various landscaping and yard maintenance tasks.

One of the standout models, the Remington 106890-01, features a powerful engine that ensures consistent performance across different terrains. This model is equipped with advanced air filtration technology, which helps in prolonging engine life and optimizing performance by reducing dust and debris entering the system. Its ergonomic design also enhances user comfort, making it easy to handle during extended use.

The 104316-04 and 104316-05 models share several characteristics, including easy-start mechanisms that allow users to begin work without hassle. Their lightweight design ensures mobility, making them ideal for homeowners and professionals alike. Both models also come with adjustable cutting widths, allowing users to customize their landscaping tasks according to specific needs.

Moving on to the 106890-02, it incorporates modern vibration-dampening technology, which significantly reduces user fatigue while working. This model is perfect for those long hours spent managing larger properties. The incorporated safety features, including automatic shut-off and safety guards, ensure that users can operate the tool with confidence.

The 108526-01 model is particularly notable for its versatility. Designed with multiple attachments, it can easily transform from a trimmer to an edger or blower, making it an all-in-one solution for various lawn and garden tasks. Its powerful motor delivers reliability across different attachments, ensuring a seamless transition during use.

The 104317 model stands out with its innovative battery technology that promises longer run times and faster charging. This feature is especially beneficial for users who prefer cordless options. Both the 106821 and 106821A models focus on energy efficiency and are fitted with eco-friendly engines that meet modern emissions standards, appealing to environmentally-conscious consumers.

In summary, Remington Power Tools continues to innovate with models like 106890-01, 104316-04, 104316-05, 106890-02, 108526-01, 104317, 106821, and 106821A. With their commitment to performance, safety, and user comfort, these power tools are set to meet the diverse needs of homeowners and landscaping professionals alike. Each model is a testament to the brand's dedication to providing durable, efficient, and user-friendly equipment that enhances outdoor living.
Top Page Image Contents