Remington Power Tools 106890-01 Storage, Technical Service, Replacement Parts and Accessories

Page 21

CLEANING AND

MAINTENANCE

Continued

4.Hold file guide level. Make sure 30° mark on file guide is parallel to center of guide bar (see Figure 19). This will insure that you file cutters at 30° angle.

5.File from inside towards outside of cutter until sharp. Only file in this one direction (see Figure 19). Note: Two or three strokes with file should sharpen cutter.

6.After each cutter is sharpened, move chain for- ward to sharpen next cutter. File all cutters on one side of chain.

7.Move to other side of chain and repeat process.

Filing Cutter Depth Gauges

The cutter depth gauge clearance is reduced as cutters are sharpened. After every second or third sharpen- ing, reset cutter depth gauges.

1.Place depth gauge tool (.025") firmly across top of two cutters. Make sure depth gauge enters slot in depth gauge tool (see Figure 21).

2.Use medium flat file. File depth gauge level with depth gauge tool.

3.Remove depth gauge tool. With flat file, round off front corner of cutter depth gauge (see Figure 22).

After several hand filings, have authorized service center or sharpening service machine sharpen chain. This will insure even filing.

REPLACING SAW CHAIN

Replace chain when cutters are too worn to sharpen or when chain breaks. Only use replacement chain noted in this manual. Always include new drive sprocket when replacing chain. This will maintain proper driving of chain. Note: For proper chain and drive sprocket, see

Replacement Parts and Accessories.

STORAGE

If storing saw for more than 30 days, follow steps below.

1.Drain oil tank.

2.Remove and clean guide bar and chain. Clean guide bar and chain by soaking in petroleum based solvent or mild soap and water mixture.

3.Dry guide bar and chain.

4.Place chain in container filled with oil. This will prevent rust.

5.Wipe a thin coating of oil over surface of guide bar.

6.Wipe off outside of saw body. Do this with soft cloth dampened with a mild soap and water mixture.

7.Store chain saw

•in a high or locked place, out of children’s reach

•in a dry place

•in a carrying case or with scabbard over guide bar

TECHNICAL SERVICE

You may have further questions about assembling, operating, or maintaining this product. If so, you can visit our Technical Service web site at www. desatech.com or contact our Technical Service Department at 1-800-858-8501 (English Only). You may also write to:

DESA Specialty Products™ P.O. Box 90004

Bowling Green, KY 42102-9004

ATTN: Technical Service Specialty Products When contacting DESA Specialty Products™, have ready

•Your Name

•Your Address

•Your Phone Number

•Model Number of Product

•Date of Purchase (Include copy of receipt for written requests).

REPLACEMENT PARTS AND ACCESSORIES

WARNING:Useonlyreplacementparts andaccessoriesdescribedinthismanual. Use of other parts or accessories could damage saw or injure operator.

For original replacement parts and accessories, con- tact your nearest Authorized Dealer or Authorized Service Center for this product. If they can not sup- ply the part or accessory, contact your nearest Parts Central listed on page 47. Each Authorized Dealer, Authorized Service Center, and Parts Central is independently owned and operated.

See pages 48 and 49 for an Illustrated Parts List.

If you need additional referral information, contact our Technical Service Department (see Technical Service). In Canada call 1-800-561-3372 for parts information. You may purchase the following service or replace- ment parts:

LNT-2

 

Part Number

Description

104302-01S#

Guide bar, 8" (20.3 cm)

104301S#

Chain, 8" (20.3 cm)

097567-01S

Guide bar, 10" (25.4 cm)

091371S

Chain, 10" (25.4 cm)

097568-02S

Guide bar, 12" (30.5 cm)

091373-02S

Chain, 12" (30.5 cm)

075752

Drive Sprocket

#Must order both pieces

Continued

108539

21

www.desatech.com

Page 20 Page 22
Image 21
Page 20 Page 22
Contents MODELS/MODELOS/MODÈLES Manual Para EL Usuario Manuel D’UTILISATION ET D’ENTRETIENBefore Operating SAW Important Safety InformationWhile Operating SAW Read ALL InstructionsSaw Maintenance and Kickback Safety Kickback Safety Devices On This SawMaintenance and Storage of Chain SAW KickbackAntes DE Utilizar LA Sierra Información Importante DE SeguridadA dry place LEA Todas LAS InstruccionesContragolpes AL Utilizar LA SierraLleve la sierra eléctrica de un lugar a otro Con el dedo fuera del gatilloMantenimiento de la cadena y seguridad contra contragolpes Mantenimiento Y Almacenamiento DE SU Sierra EléctricaCuide de su sierra eléctrica Nunca la exponga a la lluvia Avant D’UTILISER LA Tronçonneuse Consignes DE Sécurité ImportantesPendant Lutilisation DE LA Tronçonneuse Lisez Toutes LES InstructionsSuite Recul Entretien de la tronçonneuse et protection contre le reculEntretien ET Remisage DE LA Tronçonneuse ’utilisation sécuritaire et correcte de la tronçonneuse FIGURES/FIGURAS/FIGURESFIGURES/FIGURAS/ Figures FIGURES/FIGURAS Limbing a Tree Guide Bar Cross Section Showing Uneven Bar Wear Unpacking Electric Chain SAWChain SAW Names and Terms Remove all items from cartonAssembly SAW Chain Tension AdjustmentImportant Do not clamp chain saw in vise during assembly Operating Chain SAW Filling OIL TankExtension Cords Oiling ChainFelling a Tree Cutting Down a Tree Felling Procedure Felling NotchBefore Felling a Tree Felling CutLimbing a Tree Bucking a LOGTrimming a Tree Pruning Cleaning SAW Body Cleaning MaintenanceCare of Guide BAR Sharpening SAW ChainReplacement Parts and Accessories Technical ServiceStorage Filing Cutter Depth GaugesWarranty Service Repair ServiceNON-WARRANTY Service Pole SAW AssemblyObserved Fault Possible Cause Remedy TroubleshootingElectric Chain SAW Limited Warranty Model Date PurchasedIndustries of Canada, Inc Desembalaje Sierra EléctricaTerminología EnsamblajeAjuste DE Tensión DE LA Cadena Serrada USO DE LA Sierra Eléctrica LubricaciónCables DE Prolongación Lubricación DE LA CadenaAntes de derribar un árbol Tala DE UN Árbol Derribamiento de un árbolProcedimiento de tala Corte de la muesca Tala finalTrozado DE UN Tronco Desmembramiento DE UN ÁrbolLa totalidad del tronco sobre el suelo Siga estas instrucciones para trozar un troncoTronco apoyado en un extremo Limpieza Y MantenimientoTronco apoyado sobre ambos extremos Poda DE UN ÁrbolAfilado DE LA Cadena Cuidado DE LA Barra DE GuíaServicio Técnico AlmacenamientoAccesorios Y Piezas DE Repuesto Recambio DE LA Cadena SerradaServicio DE Reparación Servicio CON GarantíaServicio SIN Garantía Falla Observada Causa Posible Solución Diagnóstico Y Resolución DE ProblemasModelo Fecha de compra Garantía Limitada DE Sierra EléctricaDéballage Tronçonneuse Électrique PrimeVocabulaire DE LA Tronçonneuse MontageRéglage DE LA Tension DE LA Chaîne Remplissage DU Réservoir D’HUILEÉtendez la chaîne, bien à plat Rallonges Électriques Utilisation DE LA TronçonneuseLubrification DE LA Chaîne Sciage Avec LA TronçonneuseAvant d’abattre un arbre Abattage D’UN ArbreProcédure d’abattage Sifflet d’abattage Trait d’abattageTronçonnage D’UNE Bille ÉbranchageToute la bille repose au sol La bille est soutenue à une extrémitéTaille D’UN Arbre Élagage Nettoyage ET EntretienNettoyage DU Carter DE Tronçonneuse Entretien DE LA GUIDE-CHAÎNERemplacement DE LA Chaîne RemisageAffûtage DE LA Chaîne Pièces DE Rechange ET Accessoires Service TechniqueNuméro De pièce Description 104301S Chaîne, 20,3 cm 8 po 075752 Pignon d’entraînementService DE Réparation Service Sous GarantieService Hors Garantie Défaillance Observée Cause Possible Remède DépannageInformation SUR LA Garantie Garantie Limitée Pour LA Tronçonneuse ÉlectriqueModèle Date dachat Parts CENTRAL/CENTRAL DE PIEZAS/DÉPÔT DE Pièces LNT-2 113614-01 Parts LIST/LISTA DE REPUESTOS/LISTE DES Pièces108539 108539 108539-01 Rev. K 10/05

104316-04, 104316-04, 104316-05, 106890-01, 106890-02, 108526-01, 104317, 106821, 106821A, 106890-01 specifications

Remington Power Tools has established a reputation for providing high-quality outdoor power equipment, and their latest lineup includes a range of innovative models such as the 106890-01, 104316-04, 104316-05, 106890-02, 108526-01, 104317, 106821, and 106821A. These products are designed to enhance user experience while delivering reliable performance in various landscaping and yard maintenance tasks.

One of the standout models, the Remington 106890-01, features a powerful engine that ensures consistent performance across different terrains. This model is equipped with advanced air filtration technology, which helps in prolonging engine life and optimizing performance by reducing dust and debris entering the system. Its ergonomic design also enhances user comfort, making it easy to handle during extended use.

The 104316-04 and 104316-05 models share several characteristics, including easy-start mechanisms that allow users to begin work without hassle. Their lightweight design ensures mobility, making them ideal for homeowners and professionals alike. Both models also come with adjustable cutting widths, allowing users to customize their landscaping tasks according to specific needs.

Moving on to the 106890-02, it incorporates modern vibration-dampening technology, which significantly reduces user fatigue while working. This model is perfect for those long hours spent managing larger properties. The incorporated safety features, including automatic shut-off and safety guards, ensure that users can operate the tool with confidence.

The 108526-01 model is particularly notable for its versatility. Designed with multiple attachments, it can easily transform from a trimmer to an edger or blower, making it an all-in-one solution for various lawn and garden tasks. Its powerful motor delivers reliability across different attachments, ensuring a seamless transition during use.

The 104317 model stands out with its innovative battery technology that promises longer run times and faster charging. This feature is especially beneficial for users who prefer cordless options. Both the 106821 and 106821A models focus on energy efficiency and are fitted with eco-friendly engines that meet modern emissions standards, appealing to environmentally-conscious consumers.

In summary, Remington Power Tools continues to innovate with models like 106890-01, 104316-04, 104316-05, 106890-02, 108526-01, 104317, 106821, and 106821A. With their commitment to performance, safety, and user comfort, these power tools are set to meet the diverse needs of homeowners and landscaping professionals alike. Each model is a testament to the brand's dedication to providing durable, efficient, and user-friendly equipment that enhances outdoor living.
Top Page Image Contents