Remington BV12200A, BV1220DAT Emptying the Vacuum Bag, Removing Clogged Debris from the Impeller

10 Chapter 4: Blower/Vac Operation

Emptying the Vacuum Bag

1.Turn vacuum off and unplug power cord.

2.Lift and release draw latch on vacuum bag adapter and remove from blower/ vac housing (see Figure 4-10).

3.Unzip vacuum bag and shake out contents (see Figure 4-11).

4.Zip the vacuum bag closed and reassemble vacuum bag adapter to blower/vac housing. Note: Be sure to securely connect the draw latch to the vacuum bag adapter.

Figure 4-10: Removing bag/adapter assembly

Figure 4-11: Unzipping and emptying bag

Removing Clogged Debris from the Impeller

1.Turn vacuum off and unplug power cord.

2.Press locking lever on vacuum tube adapter and remove tube adapter as- sembly from blower/vac (see Figures 4-12 and 4-13).

3.Check the impeller for clogged debris and any signs of damage. Carefully remove debris from impellers (see Figure 4-14).

4.Replace vacuum tube adapter assem- bly.

Figure 4-12: Pressing locking lever

Figure 4-13: Removing vacuum tube adapter

Figure 4-14: Removing debris from impellers

120133