RedMax EX-LRT, EX-HE Set up EX2-BC only, EX2-BC SE1 EX2-BC SE2 EX2-BC SE3 Installing Debris Guard

6. Set up (EX2-BC only)

EX2-BC SE1

EX2-BC SE2

EX2-BC SE3

■INSTALLING DEBRIS GUARD

•Put the debris guard on the gear box, attach it with the 2 screws and hardware provided. (SE1)

■INSTALLING CUTTING HEAD (SE2)

1.While locking the gear shaft, by inserting the supplied tool into the upper holder on the gear box, loosen and remove the hexagon nut(left- handed)

2.Then screw in the cutting head to the gear shaft over the holders. Hand-tighten it securely.

■BALANCE UNIT

1.Put on strap and attach unit to strap.

2.Slide clamp up or down until unit balances with head just touching on the ground. (SE3)

14 