RedMax HEZ2601F manual If Someone Comes, Maintenance

Page 14

English

5. For safe operation

1.Grip the handles firmly with both hands using your whole hand. Place your feet slightly apart (slightly further apart than the width of your shoulders) so that your weight is distributed evenly across both legs, and always be sure to maintain a steady, even posture while working.

2.Keep cutting attachment below waist level.

3.Maintain the speed of the engine at the level required to perform cutting work, and never raise the speed of the engine above the level necessary.

4.If the unit start to shake or vibrate, turn off the engine and check the whole unit. Do not use it until the trouble has been properly corrected.

5.Keep all parts of your body away from rotating cutting attachment and hot surfaces.

6.Never touch the muffler, spark plug, or other metallic parts of the engine while the engine is in operation or immediately after shutting down the engine. Doing so could result in serious burns or electrical shock.

• IF SOMEONE COMES

1.Guard against hazardous situations at all times. Warn adults to keep pets and children away from the area. Be careful if you are approached. Injury may result from flying debris.

2.If someone calls out or otherwise interrupts you while working, always be sure to turn off the engine before turning around.

■MAINTENANCE

1.In order to maintain your product in proper working order, perform the maintenance and checking operations described in the manual at regular intervals.

2.Always be sure to turn off the engine before performing any maintenance or checking procedures.

(1) Check ok !

WARNING

The metallic parts reach high temperatures immediately after stopping the engine.

3.When replacing the cutting attachment or any other part, or when replacing the oil or any lubricant, always be sure to use only RedMax products or products which have been certified by RedMax for use with the RedMax product.

4.In the event that any part must be replaced or any maintenance or repair work not described in this

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents HEZ2601F Contents Advertencias Contenidas EN EL Manual Differents Types D’AVERTISSEMENT DE CE Mode D’EMPLOITables des matieres Contenido HEZ2601F SpecificationsParts location Especificaciohes Emplacement des pieces Situación de las piezasFiche technique Emission Control Symbols on the machinePosition Control DE Emisiones EmplacementPosición Working Circumstance For safe operationWorking Condition Condiciones DE Trabajo Consignes de securite Instrucciones de seguridadConditions DE Travail PrecaucionesWorking Plan Before Starting the EngineDE LA Machine Plan DE TravailPlan DE Trabajo Avant DE Mettre LE Moteur EN MarcheUsing the Product Starting the EngineUtilisation DE LA Machine USO DEL Producto Demarrage DU MoteurArranque DEL Motor Maintenance If Someone ComesSI Alguien SE Aproxima SI QUELQU’UN S’APPROCHEEntretien MantenimientoTransportation Handling FuelRefill after cooling the engine Manipulación DEL Combustible Manipulation DU CarburantTransport Llenar una vez que el motor se haya enfriadoScrew Clamp bolt Tightning Torque 52~69in-lbs 6~8N.m Set upSE1 Mounting Other Parts SE2Vis Boulon d’ablocage Couple de serrage 52~69in-lbs 6~8N.m Assemblage MontajeMontage D’AUTRES Pieces Montaje DE Otras PartesRecommended Mixing Ratio Gasoline 50OIL When using Zenoah genuine oilFuel Lors de l’utilisation de la véritable huile Zenoah Rapport DE Melange Recommande Essence 50 HuileCarburant Combustible Proporción DE LA Mezcla Recomendada Gasolina 50 AceiteFor Your Engine LIFE, Avoid HOW to MIX FuelFueling the Unit Eviter Pour Prolonger LA Duree DE VIE DU Moteur Comment Obtenir UN BON Melange Como Mezclar EL CombustibleRemplissage DU Reservoir Abastecimiento DE LA UnidadFuel Aceite Para USO EN Motores DE 4-TIEMPOS OP1 Adjusting Wheel HeightOperation OP2 OP3 OP4Ajuste DE LA Altura DE LA Rueda Fonctionnement UsoReglage DE LA Hauteur DE LA Roue Mise EN Marche DU MoteurOP5 OP6 Adjusting Throttle CableAdjusting Idling Speed OP7 OP7Reglage DU Ralenti OP7 Arret DU Moteur OP4Reglage Câble D’ACCÉLÉRATEUR Cómo Parar EL Motor OP4HOW to USE OP8Fonctionnement Uso Comment Utiliser LE COUPE-BORDURES Como UsarMaintenance Be Sure to Check the Following Before Using Your Stick EdgerEntretien MantenimientoMaintenance Chart Tabla DE Mantenimiento MantenimientoTableau D’ENTRETIEN AIR Filter Replacement Plug is a NGK CMR7HMA1 MA2 MA3 Fuel FilterEntretien Mantenimiento Spark arrester Muffler MA4 MA5 MA6Spark Arrester Gear CaseCarter D’ENGRENAGE Caja DE CambiosPARE-ETINCELLES Arbre DE Transmission MA6Cylinder Intake air cooling vent back MA7 Blade MA7Intake AIR Cooling Vent MA8 Toma DE Aire DE Refrigeración Cuchilla MA7Ouïe DU Refroidissement PAR AIR MA9 Procedures to be Performed After Every 100 Hours of USEStorage MA10Protector Rangement AlmacenamientoProtecteur Guide de localisation des pannes Troubleshooting guide11. Guía de localización y solución de problemas HEZ2601F NotaParts list Pipe Comp Engine Unit HEZ2601F S/N 60100101 and up Cylinder Manufacturer’s warranty coverage Owner’s warranty responsibilitiesCouverture de la garantie constructeur Obligations du propriétaire liées à la garantieCobertura de la garantía dada por el fabricante Responsabilidades del propietarioLimited Warranty RedMax Garantie limitée Garantía Limitada Komatsu Zenoah America INC

HEZ2601F specifications

The RedMax HEZ2601F is a versatile and robust outdoor power tool, specifically designed for professionals and landscaping enthusiasts who demand high performance and reliability. This lightweight, handheld hedge trimmer stands out in the market, offering a powerful engine and ergonomic design that prioritizes user comfort and efficiency.

One of the main features of the HEZ2601F is its powerful 25.4cc, 2-stroke engine. This engine delivers exceptional power and torque, allowing users to cut through thick branches and dense foliage with ease. The 2-stroke technology provides a good balance of power and weight, ensuring that the trimmer remains lightweight while still delivering high performance.

The HEZ2601F is equipped with a 24-inch dual-sided blade that offers excellent cutting capacity and efficiency. The precision-sharpened, dual-cutting blades are designed to provide a smooth, clean cut, reducing the risk of damaging plants and ensuring a flawless finish. Moreover, the blades are crafted from high-quality materials, ensuring durability and longevity, making the tool a worthwhile investment for any landscaping project.

The hedge trimmer features an innovative anti-vibration system, which significantly reduces fatigue during extended use. This characteristic is particularly beneficial for professional landscapers who work long hours, as it allows for increased productivity without compromising comfort. The ergonomic handlebars are designed to provide a secure grip and enable users to control the trimmer effectively in various cutting positions.

Another key feature of the RedMax HEZ2601F is its low emission technology. This eco-friendly design not only meets stringent environmental regulations but also enhances fuel efficiency. Users can enjoy longer operating times and reduced fuel consumption, ultimately leading to lower operating costs and a smaller carbon footprint.

The lightweight design, combined with easy-start technology, ensures that the HEZ2601F is user-friendly. It is suitable for both seasoned professionals and those new to hedge trimming. Easy maintenance features, such as accessible air filters and spark plugs, further enhance the tool's usability.

In summary, the RedMax HEZ2601F hedge trimmer is a powerful, efficient, and user-friendly tool that combines advanced technology and thoughtful design. With its robust engine, precision cutting blades, anti-vibration features, and eco-friendly technology, it represents an excellent choice for anyone looking to achieve professional-quality results in landscaping and gardening projects.
Top Page Image Contents