Makita BBX7600CA Fuel supply, Storage of machine and refill tank, Points for Fuel

Page 11

2. Fuel supply

WARNING

•When refuelling the unit, be sure to observe the following instructions to prevent ignition or fire:

-Fuel supply must be made in a place free of fire. Never bring the fire (smoking, etc.) near the place of fuel supply.

-Stop the engine and allow the engine to cool down before refuelling.

-Open the fuel tank cap slowly. The fuel may be spilled out under internal pressure.

-Take care not to spill the fuel. Any spilled fuel must be wiped clean.

-Carry out fuel supply in a well-ventilated place.

•Handle the fuel with care.

-Fuel sticking to the skin or entering an eye may cause allergies or irritation. When any physical abnormality is detected, consult the medical specialist immediately.

•DO NOT put oil in the fuel tank.

STORAGE PERIOD OF FUEL

Fuel should be used within a period of 4 weeks, even if it is kept in a special container in a well-ventilated and shaded area. Otherwise, fuel may deteriorate in one day.

Storage of machine and refill tank

•Keep the machine and tank at a cool place free from direct sunshine.

•Never keep the fuel in a car.

FUEL

The engine is a four-stroke engine. Be sure to use an automobile gasoline (regular gasoline or premium gasoline).

Points for Fuel

•Never use a gasoline mixture which contains engine oil. Otherwise, it will cause excessive carbon accumulation or mechanical troubles.

•Use of deteriorated oil will cause irregular start-up.

When refuelling, stop the engine and wait for the engine to cool down.

REFUELLING METHOD

•Loosen the tank cap a little to release the tank pressure.

•Detach the tank cap, and refuel, discharging air by tilting the fuel tank so that the refuel port will be oriented upward. DO NOT fill fuel up to the top of the tank.

•After refuelling, securely tighten the tank cap.

•If there is any flaw or damage on the tank cap, replace it.

•The tank cap wears out in course of time. Replace it every two to three years.

•DO NOT put fuel in the oil fill port.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Importante Instructions D’EMPLOI Instrucciones DE ManejoEnglish / Français / Español Table of Contents SymbolsPay particular attention to the following regulations Safety InstructionsGeneral Instructions Personal Protective EquipmentRefuelling First Aid Maintenance instructionsWhen asking for help, please give the following information Method of operationBBX7600CA Technical DataDesignation of Parts Designation of PartsAlways wear protective gloves Assembly InstructionsAssembly of Blower Pipes Attaching the Shoulder Strap Attachment ProcedureCheck Point #2 Oil spillage Before Starting the EngineChecking and Refilling Engine Oil Check Point #1 The oil capPoints for Fuel Fuel supplyStorage of machine and refill tank Starting When the engine is cold or after refuellingOperation Stopping Adjustment of IdlingWhen the engine is warm When the cruise control lever is a Low-speed positionTransporting and Storing the Blower Adjusting Shoulder strapAdjusting the control lever Operation MethodPoints in replacement of engine oil Inspection and MaintenanceReplacement of engine oil Oil Change ProcedureChecking the spark plug Cleaning of air cleanerStorage Cleaning the fuel filterCleaning of parts Replacement of gaskets and packingsPerform initial replacement after 20h operation Fault locationState of abnormality Probable cause malfunction Remedy TroubleshootingWarranty Policy Makita Limited ONE Year WarrantyEmission Compliance Period Parts Covered Federal Emission Component Defect WarrantyEmission Component Defect Warranty Period OWNER’S Warranty Responsibilities Obtaining Warranty ServiceWhat is not Covered HOW to Make a Claim MANUFACTURER’S Warranty Coverage Page Procedure Interval Table des Matières SymbolesPrêtez une attention particulière aux consignes suivantes Consignes DE SecuriteGénéralités Equipements de protectionMètres Plein de carburantConditionnement MaintenanceFonctionnement Premiers secoursCaractéristiques Techniques Désignation des pièces Liste DES PiècesComplètement monté Instructions DE MontageMontage du tube de soufflante Procédure de fixation Fixation de la bandoulièreVérification point #1 Le bouchon à huile Avant DE Démarrer LE MoteurVérification et remplissage de l’huile PrécautionRavitaillement Alimentation en carburantDurée de stockage du carburant CarburantLorsque le moteur est froid, ou après le ravitaillement FonctionnementMise en marche Quand le moteur est échauffé Réglage DU RalentiArrêt Verification de la rotation à petite vitesseManoeuvre du souffleur Mode OperatoireRéglage de la bandoulière Réglage du levier du régulateurProcédure de changement de l’huile Inspection ET MaintenanceRemplacement de l’huile à moteur ’essentiel lors de remplacement de l’huile à moteurVérification de bougie d’allumage Nettoyage du filtre à airContrôle des boulons, écrous et vis Remplacement des joints et garnituresRemisage Nettoyage du filtre à carburantLocalisation des défauts Faire le remplacement premier après 20h de marcheRemède DepannageEtat d’anomalie Politique de garantie Garantie Limitée D’UN AN MakitaContenidos SímbolosPreste una atención especial a las siguientes medidas Instrucciones DE SeguridadInstrucciones Generales Equipo Personal de ProtecciónReabasteciemiento Embalaje Metodo DE FuncionamientoInstrucciones DE Mantenimiento Primeros AuxiliosAceite del motor Datos TécnicosDenominación DE Partes Denominación DE PartesCompletamente Instrucciones DE MontajeEnsamblaje de los tubos del soplador Procedimiento de instalación Instalación de la correa al hombroPunto de inspección N1 El tapón de aceite Antes DE Poner EN Marcha EL MotorInspección y rellenado de aceite de motor PrecauciónMétodo que reaprovisiona de combustible Abastecimiento de combustiblePeríodo de almacenamiento del combustible CombustibleModo de arranque OperaciónCuando está caliente el motor Ajuste DEL RalentíModo de parar Comprobación del giro a baja velocidadOperación del Soplador Procedimiento DE OperaciónAjuste de la correa al hombro Ajuste la palanca de controlPuntos relacionados con el aceite Inspección Y MantenimientoCambio del aceite del motor Procedimiento de cambio del aceiteInspección de la bujía de alta tensión Limpieza del depurador de aireLimpieza de piezas AlmacenamientoLimpieza del filtro de combustible Inspección de pernos, tuercas y tornillosLocalización de averías Estado de la anormalidad Causa probable avería Remedio Investigación DE AveríasPolítica de garantía Garantía Limitada Makita DE UN AÑOPage Page Advertencia
Related manuals
Manual 66 pages 13.55 Kb

BBX7600CA, BBX7600 specifications

The Makita BBX7600CA and BBX7600 are powerful backpack blowers designed for both professional landscapers and homeowners seeking high-performance tools for yard maintenance. These models embody a combination of innovative technology, ergonomic design, and robust performance, making them ideal for tackling a range of outdoor cleanup tasks.

The BBX7600CA is equipped with a 75.6 cc, 4-stroke engine, which delivers impressive blowing power without the need for a fuel/oil mix. This engine type offers reduced emissions and a quieter operation, making it environmentally friendly and user-friendly. The BBX7600 features a similar robust engine configuration, offering reliable performance and durability to handle demanding jobs.

One of the standout features of these blowers is the “Easy Start” technology. This system significantly reduces the pull force required to start the engine, allowing for hassle-free ignition, especially during colder weather. Additionally, both models are designed with an efficient air filter system that enhances airflow while ensuring longevity and reducing the need for frequent maintenance.

Ergonomics play a critical role in the design of the BBX7600CA and BBX7600. The blowers come with a padded harness and adjustable shoulder straps, allowing users to work comfortably for extended periods. Their lightweight construction further adds to user convenience, making them easy to maneuver around the yard, whether you’re clearing leaves, debris, or grass clippings.

Another notable characteristic is the anti-vibration technology integrated into these models. This feature minimizes operator fatigue by dampening vibrations that are common in high-powered outdoor equipment. As a result, users can maintain productivity without discomfort during extensive use.

The blowers are also designed with an easy-to-access throttle and cruise control functionality. This allows users to maintain a consistent power output without having to keep their finger on the throttle trigger, enhancing control and comfort.

In summary, the Makita BBX7600CA and BBX7600 are versatile, efficient, and user-friendly backpack blowers. Their strong engines, ergonomic designs, and advanced features make them valuable additions to any outdoor tool arsenal, capable of tackling tough jobs with ease while ensuring operator comfort and reduced environmental impact. Whether for professional landscaping or residential use, these blowers stand out as reliable choices for maintaining a clean and tidy outdoor space.
Top Page Image Contents