Makita BBX7600CA Inspection and Maintenance, Replacement of engine oil, Oil Change Procedure

Page 15

INSPECTION AND MAINTENANCE

DANGER

Before inspection and maintenance, stop the engine and allow it to cool down. Remove the spark plug and plug cap. - Otherwise the operator may suffer burn or serious injury due to an accidental start-up.

After inspection and maintenance, make sure that all parts are assembled. Then, proceed to operation.

1.Replacement of engine oil

Deteriorated engine oil will shorten the life of the sliding and rotating parts to a great extent. Be sure to check the period and quantity of replace- ment.

DANGER

In general, the engine main unit and engine oil still remain hot just after the engine is stopped. In replacement of oil, make sure that the engine main unit and engine oil are sufficiently cooled down. Otherwise, there may remain a risk of scald. Allow sufficient time after stopping engine for the engine oil to return to the oil tank to ensure accurate reading of the oil level indicator.

If the oil filled above the limit, it may become dirty or may catch fire with white smoke.

Interval of replacement: After first 20 operating hours, followed by every 50 operating hours

Recommended oil: SAE10W-30 oil of API Classification SF Class or higher (4-stroke engine oil for automobile)

Oil Change Procedure

Please follow these steps when changing the oil:

(1)Set the blower down on a level surface.

(2)Put a waste oil container under the drainage hole (1) to catch the oil as it drains out. The container should have a capacity of at least 220 ml to be able to catch all of the oil.

(3)Loosen the oil drain bolt (2) to let the oil drain out. Be careful not to allow oil to get on the fuel tank or other parts.

Caution: Be careful not to lose the gasket (aluminum washer) (3). Put the oil drain bolt (2) in a location where it will not accumulate dirt.

(4)Remove the oil cap (4). (Removing the oil cap (4) allows the oil to drain easily.)

Caution: Be sure to set the oil cap (4) down in a location where it will not accumulate dirt.

(5)As the level of the oil being drained decreases, tilt the blower over on to the side with the drain so that the oil will completely drain out.

(6)After the oil has completely drained out, tighten the oil drain bolt (2) securely. If the bolt is not tightly fastened, this may result in an oil leak.

Caution: Do not forget to put the gasket (aluminum washer) (3) back on when reattaching the drain plug.

(7)Adding oil during the oil change procedure is performed in the same man- ner as the separately explained procedure for adding oil whenever the level is insufficient. Always add oil by filling from the opening under the oil cap.

(Specified oil level: Approximately 220 ml)

(8)After filling with oil, tighten the oil cap (4) securely to prevent oil leaks.

 

 

 

 

 

 

 

 

 

(3)

 

(2)

(1)

(4)

 

 

 

 

 

 

 

 

Points in replacement of engine oil

Never discard replaced engine oil in garbage, earth or sewage ditch. Disposal of oil is regulated by law. In disposal, always follow the relevant laws and regulations. For any points remaining unknown, contact Authorized Service Agent.

Oil will deteriorate even when it is kept unused. Perform inspection and replacement at regular intervals (replace with new oil every 6 months).

15

Image 15
Contents Instructions D’EMPLOI Instrucciones DE Manejo English / Français / EspañolImportante Table of Contents SymbolsPay particular attention to the following regulations Safety InstructionsGeneral Instructions Personal Protective EquipmentRefuelling First Aid Maintenance instructionsWhen asking for help, please give the following information Method of operationBBX7600CA Technical DataDesignation of Parts Designation of PartsAssembly Instructions Assembly of Blower PipesAlways wear protective gloves Attaching the Shoulder Strap Attachment ProcedureCheck Point #2 Oil spillage Before Starting the EngineChecking and Refilling Engine Oil Check Point #1 The oil capFuel supply Storage of machine and refill tankPoints for Fuel When the engine is cold or after refuelling OperationStarting Stopping Adjustment of IdlingWhen the engine is warm When the cruise control lever is a Low-speed positionTransporting and Storing the Blower Adjusting Shoulder strapAdjusting the control lever Operation MethodPoints in replacement of engine oil Inspection and MaintenanceReplacement of engine oil Oil Change ProcedureChecking the spark plug Cleaning of air cleanerStorage Cleaning the fuel filterCleaning of parts Replacement of gaskets and packingsPerform initial replacement after 20h operation Fault locationState of abnormality Probable cause malfunction Remedy TroubleshootingWarranty Policy Makita Limited ONE Year WarrantyEmission Compliance Period Federal Emission Component Defect Warranty Emission Component Defect Warranty PeriodParts Covered Obtaining Warranty Service What is not CoveredOWNER’S Warranty Responsibilities HOW to Make a Claim MANUFACTURER’S Warranty Coverage Page Procedure Interval Table des Matières SymbolesPrêtez une attention particulière aux consignes suivantes Consignes DE SecuriteGénéralités Equipements de protectionMètres Plein de carburantConditionnement MaintenanceFonctionnement Premiers secoursCaractéristiques Techniques Désignation des pièces Liste DES PiècesInstructions DE Montage Montage du tube de soufflanteComplètement monté Procédure de fixation Fixation de la bandoulièreVérification point #1 Le bouchon à huile Avant DE Démarrer LE MoteurVérification et remplissage de l’huile PrécautionRavitaillement Alimentation en carburantDurée de stockage du carburant CarburantFonctionnement Mise en marcheLorsque le moteur est froid, ou après le ravitaillement Quand le moteur est échauffé Réglage DU RalentiArrêt Verification de la rotation à petite vitesseManoeuvre du souffleur Mode OperatoireRéglage de la bandoulière Réglage du levier du régulateurProcédure de changement de l’huile Inspection ET MaintenanceRemplacement de l’huile à moteur ’essentiel lors de remplacement de l’huile à moteurVérification de bougie d’allumage Nettoyage du filtre à airContrôle des boulons, écrous et vis Remplacement des joints et garnituresRemisage Nettoyage du filtre à carburantLocalisation des défauts Faire le remplacement premier après 20h de marcheDepannage Etat d’anomalieRemède Politique de garantie Garantie Limitée D’UN AN MakitaContenidos SímbolosPreste una atención especial a las siguientes medidas Instrucciones DE SeguridadInstrucciones Generales Equipo Personal de ProtecciónReabasteciemiento Embalaje Metodo DE FuncionamientoInstrucciones DE Mantenimiento Primeros AuxiliosAceite del motor Datos TécnicosDenominación DE Partes Denominación DE PartesInstrucciones DE Montaje Ensamblaje de los tubos del sopladorCompletamente Procedimiento de instalación Instalación de la correa al hombroPunto de inspección N1 El tapón de aceite Antes DE Poner EN Marcha EL MotorInspección y rellenado de aceite de motor PrecauciónMétodo que reaprovisiona de combustible Abastecimiento de combustiblePeríodo de almacenamiento del combustible CombustibleModo de arranque OperaciónCuando está caliente el motor Ajuste DEL RalentíModo de parar Comprobación del giro a baja velocidadOperación del Soplador Procedimiento DE OperaciónAjuste de la correa al hombro Ajuste la palanca de controlPuntos relacionados con el aceite Inspección Y MantenimientoCambio del aceite del motor Procedimiento de cambio del aceiteInspección de la bujía de alta tensión Limpieza del depurador de aireLimpieza de piezas AlmacenamientoLimpieza del filtro de combustible Inspección de pernos, tuercas y tornillosLocalización de averías Estado de la anormalidad Causa probable avería Remedio Investigación DE AveríasPolítica de garantía Garantía Limitada Makita DE UN AÑOPage Page Advertencia
Related manuals
Manual 66 pages 13.55 Kb

BBX7600CA, BBX7600 specifications

The Makita BBX7600CA and BBX7600 are powerful backpack blowers designed for both professional landscapers and homeowners seeking high-performance tools for yard maintenance. These models embody a combination of innovative technology, ergonomic design, and robust performance, making them ideal for tackling a range of outdoor cleanup tasks.

The BBX7600CA is equipped with a 75.6 cc, 4-stroke engine, which delivers impressive blowing power without the need for a fuel/oil mix. This engine type offers reduced emissions and a quieter operation, making it environmentally friendly and user-friendly. The BBX7600 features a similar robust engine configuration, offering reliable performance and durability to handle demanding jobs.

One of the standout features of these blowers is the “Easy Start” technology. This system significantly reduces the pull force required to start the engine, allowing for hassle-free ignition, especially during colder weather. Additionally, both models are designed with an efficient air filter system that enhances airflow while ensuring longevity and reducing the need for frequent maintenance.

Ergonomics play a critical role in the design of the BBX7600CA and BBX7600. The blowers come with a padded harness and adjustable shoulder straps, allowing users to work comfortably for extended periods. Their lightweight construction further adds to user convenience, making them easy to maneuver around the yard, whether you’re clearing leaves, debris, or grass clippings.

Another notable characteristic is the anti-vibration technology integrated into these models. This feature minimizes operator fatigue by dampening vibrations that are common in high-powered outdoor equipment. As a result, users can maintain productivity without discomfort during extensive use.

The blowers are also designed with an easy-to-access throttle and cruise control functionality. This allows users to maintain a consistent power output without having to keep their finger on the throttle trigger, enhancing control and comfort.

In summary, the Makita BBX7600CA and BBX7600 are versatile, efficient, and user-friendly backpack blowers. Their strong engines, ergonomic designs, and advanced features make them valuable additions to any outdoor tool arsenal, capable of tackling tough jobs with ease while ensuring operator comfort and reduced environmental impact. Whether for professional landscaping or residential use, these blowers stand out as reliable choices for maintaining a clean and tidy outdoor space.