®
ELECTRIC POLE TRIMMER
OPERATING POLE TRIMMER
Continued
Locking the Pole Trimmer ON
1.Push the trigger lock button forward to Position 2 and squeeze the trigger le- ver to the ON position. The Pole Trim- mer will start running.
2.While the Pole Trimmer is running, push the trigger lock button forward again to Position 3. Hold the button there while releasing the trigger lever, then release the lock button. This locks the trigger lever in the ON position and the Pole Trimmer will continue running.
3.To turn the Pole Trimmer OFF, squeeze the trigger lever and release it. The trig- ger lock button will reset to Position 1, locking the trigger in the OFF position.
Note: If the Pole Trimmer is locked ON during use and the Pole Trimmer becomes disconnected from the power supply, Dis- engage the lock ON feature before recon- necting to the power supply.
Trigger Lock
Button Position 3
Figure 11 - Locking Trigger in ON Position with Trigger Lock Button in Position 3
USING THE POLE TRIMMER
The Pole Trimmer is a
OPERATING POSITIONS
To use the Pole Trimmer for trimming tall,
Figure 12 - Trimming Tall Hedges or Shrubs
To use the Pole Trimmer for trimming smaller hedges or shrubs, hold the Pole Trimmer at the positions shown in Figure 13.
Figure 13 - Trimming Smaller Hedges or Shrubs
To use the Pole Trimmer for trimming the bottoms and sides of hedges and shrubs, hold the Pole Trimmer at the positions shown in Figure 14.
Figure 14 - Trimming Bottoms and Sides of Hedges and Shrubs
To use the Pole Trimmer for trimming low- lying foliage or ground cover, hold the Pole Trimmer at the position shown in Figure 15.
Figure 15 - Trimming Low Foliage or Ground Cover
For more information, visit www.desatech.com | 6 | 110939 |