Black & Decker LST300 Switching on and off, Operating the Trimmer, Convert To Edging Mode

Page 9

OPERATING INSTRUCTIONS

WARNING: Always use proper eye protection that conforms to ANSI Z87.1 (CAN/CSA Z94.3) while operating this power trimmer.

WARNING: Remove the battery before making any assembly, adjustments, or changing accessories. Such preventive safety measures reduce the risk of starting the trimmer accidentally. CAUTION: Before you begin trimming, only use the appropriate type of cutting line.

CAUTION: Inspect area to be trimmed and remove any wire, cord, or string-like objects which could become entangled in the rotating line or spool. Be particularly careful to avoid any wire which might be bent outwardly into the path of the trimmer, such as barbs at the base of a chain link fence.

Switching on and off

• To switch the trimmer on, push the lock off button (shown in inset, figure J) across from either side and then squeeze the trigger switch.

• To switch the trimmer off, release the trigger switch.

OPERATING THE TRIMMER

• With the unit on, angle unit and slowly swing the trimmer side to side as shown in figure J.

• Maintain a cutting angle of 5° to 10° as shown in figure J1. Do not exceed 10° (figure J2). Cut with the tip of the line. To keep distance from hard surfaces use edge guide (6).

• Maintain a minimum distance of 24 inches (609.6 mm) between the guard and your feet as shown in figure J1. To acheive this distance adjust the overall height of the trimmer as shown in figure I.

CONVERT TO EDGING MODE

WARNING: When being used as an Edger, stones, pieces of metal and other objects can be thrown out at high speed by the line. The trimmer and guard are designed to reduce the danger. However, MAKE SURE that other persons and pets are at least 100 feet (30m) away.

• To operate as a maintenance edger, turn the collar (4) as shown in figure I.

• Hold the metal shaft and rotate the lower housing 180° until trimmer is in the position shown in figure K.

• Turn the collar back until tight.

• Position the trimmer with the wire guide (6) along the surface as shown in figure L.

• Return to the trimming position by loosening the collar and rotating the lower housing back 180°.

• Turn the collar until tight. When using the trimmer, retract the wire edge guide to the original position, out of the way.

Cutting Line / LINE FEEDING

Your trimmer uses .065 inch (1.65 mm) diameter, ROUND nylon line. During use, the tips of the nylon lines will become frayed and worn and the special self feeding spool will automatically feed and trim a fresh length of line. Do not bump on ground in attempt to feed line or for any other purposes.

Cutting line will wear faster and require more feeding if the cutting or edging is done along sidewalks or other abrasive surfaces or heavier weeds are being cut.

REPLACEMENT ACCESSORIES

CAUTION: Before you begin trimming, only use the appropriate type of cutting line. Use Black & Decker replacement spool Model No. AF-100, and replacement cap RC-100. Reload nylon line (either bulk or prewound replacement spool) as shown in this manual.

• USE ONLY .065 inch (1.65 mm) DIAMETER ROUND NYLON MONOFILAMENT LINE. Do not use serrated or heavier gauge line, as they will overload the motor and cause overheating, and will not feed properly. This line is available at your local dealer or authorized service center.

• Other replacement parts (guards, spool caps, etc.) are available through Black & Decker service centers. To find your local service location call: 1-800-544-6986 or visit www.blackanddecker.com.

WARNING: The use of any accessory not recommended by Black & Decker for use with this trimmer could be hazardous.

9

Image 9
Contents 20V max* Trimmer/Edger Page To Reduce Risk of Injury Important Safety Warnings and InstructionsPage Functional Description figure a Important Safety Instructions FOR BATTERY CHARGERSWire size AWG or American Wire Gauge Read all InstructionsAn extension cord must have adequate Charging Procedure Storage RecommendationsImportant Charging Notes LI-ION Battery Packs and Chargers Description Cat. # Installing and Removing the Battery PackInstalling the guard Height adjustmentSwitching on and off Operating the TrimmerCONVERT TO EDGING MODE REPLACING THE SPOOL Rbrc SealFull Two-Year Home Use Warranty Service InformationTrimmer runs slowly Automatic line feed does not workTAILLE-BORDURE / COUPE-BORDURE 20v Max Réduction DES Risques DE Blessures Lignes directrices en matière de sécurité définitionsConserve Estas Instrucciones Avertissement Description Fonctionnelle Figure aChargement décrites. Lire toutes les directives Directives DE Sécurité Importantes Pour LES BLOCS-PILESRecommandations en matière de rangement Procédure de chargeRemarques importantes sur le chargement Pose du pare-main Configuration DE L’ASSEMBLAGE ET DES RéglagesAccessoires DE Rechange Convertir AU Mode COUPE-BORDUREFonctionnement Fonctionnement DU TAILLE-BORDURESRemplacer LA Bobine Le sceau SrprcmcEntretien Page DE Podadora / Bordeadora 20V MAX Pautas DE SEGURIDAD/DEFINICIONES AdvertenciaReducir EL Riesgo DE Lesiones Page Símbolos Descripción DE LAS Funciones Figura aLea todas las instrucciones Recomendaciones con respecto al almacenamiento Procedimiento de cargaNotas importantes sobre la carga ENSAMBLADO/REGULACIONES Instalación y retiro del paquete de bateríasDescripción De cat Funcionamiento Funcionamiento DE LA PodadoraConversión AL Modo DE Bordeado Accesorios de repuesto Cuerda de corte/ALIMENTACIÓN DE LA CuerdaReemplazo DE Carretes Detección de problemas MantenimientoCarrete Garantía completa de dos años para uso en el hogar Información de mantenimientoEsta Garantia no Aplica Cuando Años DE GarantiaSolamente Para Propositos DE Mexico Catalog Number LST300

LST300, LST300R specifications

Black & Decker is a well-known brand in the power tools and outdoor equipment industry, and their LST300 and LST300R string trimmers are perfect examples of innovation and user-friendly design. Both models cater to home gardeners and landscapers seeking a reliable solution for maintaining their lawns.

The LST300 and LST300R are equipped with a powerful 20V lithium-ion battery, offering enough energy for extended usage while ensuring efficient runtime. The lithium-ion technology not only reduces weight but also minimizes self-discharge, which means you can keep these tools charged and ready for use whenever you need them.

One prominent feature of both string trimmers is their automatic feed spool system. This technology allows for continuous line advancement, so users don’t have to worry about manual adjustments. The automatic feed ensures that the trimmer line is dispensed as needed, allowing for uninterrupted trimming. This feature makes it easy to achieve a neat finish with minimal hassle.

Another noteworthy characteristic of the LST300 and LST300R is the 2-in-1 functionality. Users can quickly convert the trimmer into an edger with just a simple adjustment, making it easy to switch between trimming the lawn and edging sidewalks or flower beds. This versatility adds to the overall value of the tools, as it eliminates the need for multiple devices.

The trimmers also feature a lightweight design, allowing users to maneuver them easily around their gardens without causing undue strain. The adjustable telescoping shaft ensures that the trimmer can be tailored to fit different users, making it comfortable for anyone to operate.

Both models come with a battery charger that allows for quick recharges, ensuring that the trimmers are always ready for action. The LST300R model comes with a second battery, offering even more convenience and extended run time for larger yards or more demanding tasks.

In conclusion, the Black & Decker LST300 and LST300R string trimmers are ideal for anyone looking for an efficient, powerful, and easy-to-use landscaping tool. With features like lithium-ion power, automatic feed spool, and 2-in-1 functionality, these trimmers stand out in the competitive market of outdoor power equipment, making yard maintenance a breeze. Whether you opt for the LST300 or the LST300R, you can count on Black & Decker's reputation for delivering quality products that meet the needs of everyday users.