Maintenance, Troubleshooting | Black & Decker LST220R specification

drop off the spent battery. RBRC™ is a registered trademark of the Rechargeable Battery Recycling Corporation.

MAINTENANCE

WARNING: To avoid serious injury, remove the battery from the tool before performing any maintenance.

1. Keep the air intake slots clean to avoid overheating.

2. Your trimmer line can dry out over time. To keep your line in top condition, store spare pre-wound spools or bulk line in a plastic, sealable bag with a tablespoon of water.

3. Plastic parts may be cleaned by using a mild soap and a damp rag.

4. The line cutter on the edge of the guard can dull over time. It is recommended you periodically touch-up the sharpness of the blade with a file.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.

TROUBLESHOOTING

Tool runs slowly

• Remove battery from tool.

• Check that the spool housing can rotate freely. Carefully clean it if necessary.

• Check that the cutting line does not protrude more than approximately 5-3/8 inches (136mm) from the spool. If it does, cut it off so that it just reaches the line trimming blade.

Automatic line feed does not work

• Remove battery from tool.

• Remove the spool cap.

• Pull the cutting line until it protrudes approximately 5-3/8 inches (136mm) from the spool. If insufficient cutting line is left on the spool, install a new spool of cutting line.

• Ensure that the line is not crisscrossed on the spool as detailed in figure 17. If it is, unwind the cutting line, then wind it back on

the spool neatly so that the lines do not cross.

• Push the spool onto the housing until it snaps securely into place.

• Align the tabs on the spool cap with the cut outs in the housing.

• If the cutting line protrudes beyond the trimming blade, cut it off so that it just reaches the blade. If the automatic line feed still does not work or the spool is jammed, try the following suggestions:

• Carefully clean the spool and housing.

• Remove the spool and check if the lever in the spool housing can move freely.

• Remove the spool and unwind the cutting line, then wind it on neatly again. Replace the spool into the housing.

SERVICE INFORMATION

All BLACK+DECKER Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the BLACK+DECKER location nearest you. To find your local service location, call: 1-800-544-6986 or visit www.blackanddecker.com

This Class B digital apparatus complies with Canadian ICES-003. This device complies with part 15 of the FCC rules. Operation

is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or

LST220R, LST220 specifications

The Black & Decker LST220R and LST220 are two innovative and powerful cordless string trimmers designed to make yard work easier and more efficient. These models cater to homeowners who want a flexible and lightweight solution for maintaining their lawns and gardens. Both trimmers share many features, making them reliable choices for tackling grass, weeds, and overgrown areas.

One of the standout features of the LST220R and LST220 is their 20-volt lithium-ion battery, which provides ample power and runtime needed for various trimming tasks. This battery technology ensures longer battery life and minimal self-discharge, allowing users to recharge and get back to work quickly. The trimmers come equipped with a 12-inch cutting swath, allowing for a wide trimming path that is efficient for medium to small-sized yards.

The innovative automatic feed spool system is another highlight, eliminating the hassle of manual line adjustments. This feature automatically feeds the cutting line as needed, ensuring a continuous, hassle-free operation while trimming. The dual-line design offers enhanced cutting performance, making it even easier to tackle tougher vegetation without compromising efficiency.

Ergonomics are a significant focus in the design of the LST220R and LST220. With their lightweight construction, these trimmers are easy to maneuver, reducing user fatigue during extended use. The adjustable height feature allows users to customize the trimmer's length, accommodating different user preferences and providing comfort while operating.

Moreover, both models come with the capability to convert from a trimmer to an edger, giving users greater versatility and functionality in one compact tool. The easy-to-use conversion feature allows for seamless switching between trimming and edging tasks, making it an excellent choice for those who want to ensure a neat and tidy lawn.

In summary, the Black & Decker LST220R and LST220 are excellent cordless trimmers that combine power, convenience, and versatility. With their efficient lithium-ion battery, automatic feed spool, lightweight design, and easy conversion to an edger, these trimmers make yard maintenance tasks less daunting. Homeowners can rely on these tools to keep their outdoor spaces looking pristine throughout the growing season.