Snapper 500Z manual Practice Turning Around a Corner, Practice Turning In Place, Executing Turns

Page 20

Operation

Operation

Practice Turning Around a Corner

While traveling forward allow one lever to gradually return back toward neutral. Repeat several times.

NOTE: To prevent pivoting directly on the tire tread, it is best to keep both wheels going at least slightly forward.

Executing

Turns

Figure 12. Turning Around a Corner

Practice Turning In Place

To turn in place, “Zero Turn,” gradually move one ground speed control lever forward from neutral and one lever back from neutral simultaneously. Repeat several times.

NOTE: Changing the amount each lever is pulled—forward or back, changes the “pivot point” you turn on.

Turning

In-Place

Figure 13. Turning in Place

Executing an End-Of-Row Zero Turn

Your Zero Turn Rider’s unique ability to turn in place allows you to turn around at the end of a cutting row rather than having to stop and Y-turn before starting a new row.

For example, to execute a left end-of row zero turn:

1. Slow down at the end of the row.

2. Move the RIGHT ground speed control lever forward slightly while moving the LEFT ground speed control lever back to center and then slightly back from center.

3. Begin mowing forward again.

This technique turns the rider LEFT and slightly overlaps the row just cut —eliminating the need to back up and re-cut missed grass.

As you become more familiar and experienced with operating the Zero Turn rider, you will learn more maneuvers that will make your mowing time easier and more enjoyable.

Remember, the more you practice, the better your control of the Zero Turn will be!

Figure 14. Executing an End-Of-Row Turn

18

www.Snapper.com

Page 19 Page 21
Image 20
Page 19 Page 21
Contents ZERO-TURN Riding Mower 26HP Zero-Turn RidersDate Purchased Table of Contents Operator Safety Operator SafetyOperating Safety Read the ManualMoving Parts Slope OperationThrown Objects Enclosed Areas Fuel and MaintenanceRetaining WALLS, DROP-OFFS, and Water Transporting and Storage Wear hearing protection when operating this machineGeneral Operation Towed Equipment RIDE-ON Units EmissionsIgnition System Mow across slopes, not up and downSafe Handling of Gasoline Service and MaintenanceService & Maintenance Safety Decals Safety Interlock System Operational Safety ChecksSafety Icons North American Safety IconsIdentification Numbers Features and ControlsFeatures and Controls Seat Adjustment Lever Ignition SwitchControl Functions Ground Speed Control LeversFeatures & Controls General Operating Safety OperationOperation Checks Before StartingTire Pressure Seat AdjustmentCheck Tire Pressures To adjust pedal position Mowing Height AdjustmentFoot Pedal Adjustment Insert the key into the ignition switch and turn it to Starting the EngineStopping the Rider Pushing the Rider By HandForward Reverse Travel Zero Turn Driving PracticeForward Travel Practice Practice Turning Around a Corner Practice Turning In PlaceExecuting an End-Of-Row Zero Turn Executing TurnsMowing Mowing RecommendationsHeight of Grass Tall Grass Requires Incremental CuttingMowing Methods Attaching a Trailer Proper MulchingMulching Requires Excellent Mowing Conditions Engine Speed & Ground Speed for MulchingRegular Maintenance Regular MaintenanceMaintenance Schedule Safety Items Before Every SpringEngine Maintenance Checking / Adding FuelFuel Filter Change Oil & FilterLubrication GreaseOil Lubricating the Front CastersTransmission Oil Filter Change Change Interval Every 200 Hours Replacement Filter NumberCheck / Fill Transmission Oil Never weld or straighten bent mower blades Servicing The Mower BladesInspecting the Mower Blades Reinstalling the Mower Blades Balancing the Mower Blade NailNeutral Adjustment Ground Speed Control Lever AdjustmentSpeed Balancing Adjustment Parking Brake Adjustment 375 0,95 cmReturn-to-Neutral Adjustment Return-to-Neutral Adjustment Jam Nuts Neutral Return RodDeck Rod Timing Adjustment Deck Leveling AdjustmentAdjustment is required continue with Step Mower deckMower Belt Replacement 48 Deck Models To avoid damaging belts, do not PRY Belts Over PulleysHydraulic Pump Drive Belt Replacement Use extreme caution when removing this springBattery Maintenance Battery CompartmentBattery Service Checking Battery VoltageCharging a Completely Discharged Battery Jump Starting With Auxiliary Booster BatteryMake Certain Vehicles do not Touch Storage Starting After Long Term StorageTemporary Storage 30 Days Or Less Long Term Storage Longer Than 30 DaysTroubleshooting TroubleshootingTroubleshooting Chart Troubleshooting the RiderTroubleshooting Troubleshooting Common Cutting Problems StreakingSpecifications DimensionsEngine ChassisLine IndentificationSlope Surface Vertical a with Edge this AlignPage Page Page Product Specifications Common Service PartsTractor Mower Deck

500Z specifications

The Snapper 500Z is a cutting-edge zero-turn lawn mower designed for both residential and commercial landscaping needs. This mower offers exceptional performance, versatility, and ease of use, making it a top choice for lawn care enthusiasts and professionals alike.

One of the main features of the Snapper 500Z is its powerful engine. Equipped with a reliable 23-horsepower Briggs & Stratton engine, the 500Z provides ample power to tackle challenging mowing tasks. This engine is designed to deliver smooth and consistent performance, ensuring that users can navigate their lawns with ease.

The Snapper 500Z also boasts a robust 52-inch cutting deck, made from durable materials that can withstand the rigors of regular use. With its wide cutting path, this mower allows users to cover more ground in less time, making mowing tasks quicker and more efficient. The adjustable cutting height feature provides users with the flexibility to customize their mowing height, ranging from 1.5 to 4.5 inches, ensuring a tailored cut for every lawn type.

Technology-driven features set the Snapper 500Z apart from its competitors. The mower is equipped with a hydrostatic transmission system, providing effortless control and smooth acceleration. Users can easily adjust their speed without the hassle of shifting gears, allowing for a seamless mowing experience. This system enhances mobility and maneuverability, enabling users to navigate around obstacles with precision.

Comfort and ergonomics are also a priority in the design of the Snapper 500Z. The mower features a plush, high-back seat with armrests, offering support during longer mowing sessions. An intuitive control layout ensures users can easily access all necessary functions without distraction. Additionally, the mower's compact design allows for easy storage and transportation.

Safety is paramount, and the Snapper 500Z incorporates various safety features. The operator presence control system ensures that the mower will not operate unless the user is seated, reducing the risk of accidents. Additionally, the durable roll-over protection structure (ROPS) provides an added layer of safety during operation.

In conclusion, the Snapper 500Z combines powerful performance, advanced technology, and user-friendly design to create an exceptional mowing experience. With its reliable engine, versatile cutting deck, and comfort-focused features, the Snapper 500Z is a standout choice for anyone looking to maintain a pristine lawn.
Top Page Image Contents