Snapper 500Z manual Servicing The Mower Blades, Inspecting the Mower Blades

Page 28

Maintenance

Regular Maintenance

Servicing The Mower Blades

Removing the Mower Blade

CAUTION

Avoid injury! Mower blades are sharp.

•Always wear gloves when handling mower blades or working near blades.

1.To remove the mower blade, use a 1” wrench on the flats of the spindle shaft and remove the mower blade mounting bolt with a 15/16” wrench (Figure 26).

2.If there are no flats on the spindle shaft, wedge a wooden block between the mower blade and the mower deck housing to keep the mower blade from turning.

Inspecting the Mower Blades

DANGER

Avoid injury! A worn or damaged blade can break, and a piece of the mower blade could be thrown into the operator’s or bystander’s area, resulting in serious personal injury or death.

•Inspect the mower blade every 25 hours or at least once a year.

•If the mower blade hits a solid object, stop the engine immediately and inspect the mower blade.

•Never weld or straighten bent mower blades.

1.Remove the mower blade from the unit. See Removing the Blade.

2.Inspect the mower blade (Figures 27 & 28). Discard the mower blade if it has any of the below conditions.

A.) Has more than .5” (12,7 mm) of the mower blade metal removed from previous sharpening or wear (D, Figure 27).

B.) The air lifts are excessively eroded (B & C, Figure

28) and the notch (C) is .25” (6,35 mm) deep or greater.

C.) Mower blade is bent or broken.

3.If the cutting edges are not sharp or have nicks, sharpen the blades. See Sharpening the Mower Blades.

Figure 26. Loosening the Mower Blade for Removal

B

A

C

A

D

 

C

 

Figure 27. Inspecting the Mower Blade Tips

A.Mower Blade Cutting Edge

B.Square Corner

C.Air Lift

D.Wear Measurement - DISCARD Mower Blade If greater than .5” (12,7 mm)

C

AB

Figure 28. inspecting the Mower Blade Air Lifts

A.New Mower Blade

B.Mower Blade at Wear Limit (A notch begins to form)

C.Mower Blade in Dangerous Condition (Notch measures .25” (6,35 mm) or greater DO NOT USE. Replace with new mower blade.)

26

www.Snapper.com

Page 27 Page 29
Image 28
Page 27 Page 29
Contents ZERO-TURN Riding Mower 26HP Zero-Turn RidersDate Purchased Table of Contents Operator Safety Operator SafetyOperating Safety Read the ManualThrown Objects Slope OperationMoving Parts Retaining WALLS, DROP-OFFS, and Water Fuel and MaintenanceEnclosed Areas General Operation Wear hearing protection when operating this machineTransporting and Storage Towed Equipment RIDE-ON Units EmissionsIgnition System Mow across slopes, not up and downService & Maintenance Service and MaintenanceSafe Handling of Gasoline Safety Decals Safety Interlock System Operational Safety ChecksSafety Icons North American Safety IconsFeatures and Controls Features and ControlsIdentification Numbers Seat Adjustment Lever Ignition SwitchControl Functions Ground Speed Control LeversFeatures & Controls General Operating Safety OperationOperation Checks Before StartingCheck Tire Pressures Seat AdjustmentTire Pressure Foot Pedal Adjustment Mowing Height AdjustmentTo adjust pedal position Insert the key into the ignition switch and turn it to Starting the EngineStopping the Rider Pushing the Rider By HandForward Travel Practice Zero Turn Driving PracticeForward Reverse Travel Practice Turning Around a Corner Practice Turning In PlaceExecuting an End-Of-Row Zero Turn Executing TurnsMowing Mowing RecommendationsHeight of Grass Tall Grass Requires Incremental CuttingMowing Methods Attaching a Trailer Proper MulchingMulching Requires Excellent Mowing Conditions Engine Speed & Ground Speed for MulchingRegular Maintenance Regular MaintenanceMaintenance Schedule Safety Items Before Every SpringEngine Maintenance Checking / Adding FuelFuel Filter Change Oil & FilterLubrication GreaseOil Lubricating the Front CastersCheck / Fill Transmission Oil Change Interval Every 200 Hours Replacement Filter NumberTransmission Oil Filter Change Inspecting the Mower Blades Servicing The Mower BladesNever weld or straighten bent mower blades Reinstalling the Mower Blades Balancing the Mower Blade NailSpeed Balancing Adjustment Ground Speed Control Lever AdjustmentNeutral Adjustment Parking Brake Adjustment 375 0,95 cmReturn-to-Neutral Adjustment Return-to-Neutral Adjustment Jam Nuts Neutral Return RodDeck Rod Timing Adjustment Deck Leveling AdjustmentAdjustment is required continue with Step Mower deckMower Belt Replacement 48 Deck Models To avoid damaging belts, do not PRY Belts Over PulleysHydraulic Pump Drive Belt Replacement Use extreme caution when removing this springBattery Maintenance Battery CompartmentBattery Service Checking Battery VoltageCharging a Completely Discharged Battery Jump Starting With Auxiliary Booster BatteryMake Certain Vehicles do not Touch Storage Starting After Long Term StorageTemporary Storage 30 Days Or Less Long Term Storage Longer Than 30 DaysTroubleshooting TroubleshootingTroubleshooting Chart Troubleshooting the RiderTroubleshooting Troubleshooting Common Cutting Problems StreakingSpecifications DimensionsEngine ChassisLine IndentificationSlope Surface Vertical a with Edge this AlignPage Page Page Product Specifications Common Service PartsTractor Mower Deck

500Z specifications

The Snapper 500Z is a cutting-edge zero-turn lawn mower designed for both residential and commercial landscaping needs. This mower offers exceptional performance, versatility, and ease of use, making it a top choice for lawn care enthusiasts and professionals alike.

One of the main features of the Snapper 500Z is its powerful engine. Equipped with a reliable 23-horsepower Briggs & Stratton engine, the 500Z provides ample power to tackle challenging mowing tasks. This engine is designed to deliver smooth and consistent performance, ensuring that users can navigate their lawns with ease.

The Snapper 500Z also boasts a robust 52-inch cutting deck, made from durable materials that can withstand the rigors of regular use. With its wide cutting path, this mower allows users to cover more ground in less time, making mowing tasks quicker and more efficient. The adjustable cutting height feature provides users with the flexibility to customize their mowing height, ranging from 1.5 to 4.5 inches, ensuring a tailored cut for every lawn type.

Technology-driven features set the Snapper 500Z apart from its competitors. The mower is equipped with a hydrostatic transmission system, providing effortless control and smooth acceleration. Users can easily adjust their speed without the hassle of shifting gears, allowing for a seamless mowing experience. This system enhances mobility and maneuverability, enabling users to navigate around obstacles with precision.

Comfort and ergonomics are also a priority in the design of the Snapper 500Z. The mower features a plush, high-back seat with armrests, offering support during longer mowing sessions. An intuitive control layout ensures users can easily access all necessary functions without distraction. Additionally, the mower's compact design allows for easy storage and transportation.

Safety is paramount, and the Snapper 500Z incorporates various safety features. The operator presence control system ensures that the mower will not operate unless the user is seated, reducing the risk of accidents. Additionally, the durable roll-over protection structure (ROPS) provides an added layer of safety during operation.

In conclusion, the Snapper 500Z combines powerful performance, advanced technology, and user-friendly design to create an exceptional mowing experience. With its reliable engine, versatile cutting deck, and comfort-focused features, the Snapper 500Z is a standout choice for anyone looking to maintain a pristine lawn.
Top Page Image Contents