Snapper 500Z manual Lubrication, Grease, Oil, Lubricating the Front Casters

Page 26

Maintenance

Regular Maintenance

Lubrication

Lubricate the unit at the locations shown in Figures 20 through 23 as well as the following lubrication points.

Grease:

•front caster wheel axles & yokes

•deck lift pivot blocks

•mower deck spindles

•mower deck idler arm

Use grease fittings when present. Disassemble parts to apply grease to moving parts when grease fittings are not installed.

Not all greases are compatible. Red Grease (p/n 5022285) is recommended, automotive-type high-temperature, lithium grease may be used when this is not available.

Oil:

•control handle pivots

•seat plate pivots

•deck lift pivots

•discharge chute hinge

Generally, all moving metal parts should be oiled where contact is made with other parts. Keep oil and grease off belts and pulleys. Remember to wipe fittings and surfaces clean both before and after lubrication.

Lubricating the Front Casters:

NOTE: Front casters should be lubricated annually.

1.Remove the 1/4-28 bolt (A, Figure 23) screwed into the front caster and install a 1/4-28 grease fitting.

2.Grease the front caster.

3.Remove the 1/4-28 grease fitting and reinstall the 1/4-28 bolt.

4.Repeat process for the other side of the machine.

Figure 20. Deck Lubrication

Figure 21. Control Handle Pivots & Seat Plate Pivots

Figure 22. Deck Lift Linkage Pivots

A

Figure 23. Front Caster & Wheel

A. 1/4-28 Bolt

24

www.Snapper.com

Page 25 Page 27
Image 26
Page 25 Page 27
Contents ZERO-TURN Riding Mower 26HP Zero-Turn RidersDate Purchased Table of Contents Operating Safety Operator SafetyOperator Safety Read the ManualMoving Parts Slope OperationThrown Objects Enclosed Areas Fuel and MaintenanceRetaining WALLS, DROP-OFFS, and Water Transporting and Storage Wear hearing protection when operating this machineGeneral Operation Ignition System Towed Equipment RIDE-ON UnitsEmissions Mow across slopes, not up and downSafe Handling of Gasoline Service and MaintenanceService & Maintenance Safety Decals Safety Icons Safety Interlock SystemOperational Safety Checks North American Safety IconsIdentification Numbers Features and ControlsFeatures and Controls Control Functions Seat Adjustment LeverIgnition Switch Ground Speed Control LeversFeatures & Controls Operation General Operating SafetyOperation Checks Before StartingTire Pressure Seat AdjustmentCheck Tire Pressures To adjust pedal position Mowing Height AdjustmentFoot Pedal Adjustment Stopping the Rider Insert the key into the ignition switch and turn it toStarting the Engine Pushing the Rider By HandForward Reverse Travel Zero Turn Driving PracticeForward Travel Practice Executing an End-Of-Row Zero Turn Practice Turning Around a CornerPractice Turning In Place Executing TurnsHeight of Grass MowingMowing Recommendations Tall Grass Requires Incremental CuttingMowing Methods Mulching Requires Excellent Mowing Conditions Attaching a TrailerProper Mulching Engine Speed & Ground Speed for MulchingMaintenance Schedule Regular MaintenanceRegular Maintenance Safety Items Before Every SpringFuel Filter Engine MaintenanceChecking / Adding Fuel Change Oil & FilterOil LubricationGrease Lubricating the Front CastersTransmission Oil Filter Change Change Interval Every 200 Hours Replacement Filter NumberCheck / Fill Transmission Oil Never weld or straighten bent mower blades Servicing The Mower BladesInspecting the Mower Blades Reinstalling the Mower Blades Balancing the Mower Blade NailNeutral Adjustment Ground Speed Control Lever AdjustmentSpeed Balancing Adjustment Parking Brake Adjustment 375 0,95 cmReturn-to-Neutral Adjustment Return-to-Neutral Adjustment Jam Nuts Neutral Return RodAdjustment is required continue with Step Deck Rod Timing AdjustmentDeck Leveling Adjustment Mower deckMower Belt Replacement 48 Deck Models To avoid damaging belts, do not PRY Belts Over PulleysHydraulic Pump Drive Belt Replacement Use extreme caution when removing this springBattery Maintenance Battery CompartmentCharging a Completely Discharged Battery Battery ServiceChecking Battery Voltage Jump Starting With Auxiliary Booster BatteryMake Certain Vehicles do not Touch Temporary Storage 30 Days Or Less StorageStarting After Long Term Storage Long Term Storage Longer Than 30 DaysTroubleshooting Chart TroubleshootingTroubleshooting Troubleshooting the RiderTroubleshooting Troubleshooting Common Cutting Problems StreakingEngine SpecificationsDimensions ChassisSlope LineIndentification Surface Vertical a with Edge this AlignPage Page Page Tractor Product SpecificationsCommon Service Parts Mower Deck

500Z specifications

The Snapper 500Z is a cutting-edge zero-turn lawn mower designed for both residential and commercial landscaping needs. This mower offers exceptional performance, versatility, and ease of use, making it a top choice for lawn care enthusiasts and professionals alike.

One of the main features of the Snapper 500Z is its powerful engine. Equipped with a reliable 23-horsepower Briggs & Stratton engine, the 500Z provides ample power to tackle challenging mowing tasks. This engine is designed to deliver smooth and consistent performance, ensuring that users can navigate their lawns with ease.

The Snapper 500Z also boasts a robust 52-inch cutting deck, made from durable materials that can withstand the rigors of regular use. With its wide cutting path, this mower allows users to cover more ground in less time, making mowing tasks quicker and more efficient. The adjustable cutting height feature provides users with the flexibility to customize their mowing height, ranging from 1.5 to 4.5 inches, ensuring a tailored cut for every lawn type.

Technology-driven features set the Snapper 500Z apart from its competitors. The mower is equipped with a hydrostatic transmission system, providing effortless control and smooth acceleration. Users can easily adjust their speed without the hassle of shifting gears, allowing for a seamless mowing experience. This system enhances mobility and maneuverability, enabling users to navigate around obstacles with precision.

Comfort and ergonomics are also a priority in the design of the Snapper 500Z. The mower features a plush, high-back seat with armrests, offering support during longer mowing sessions. An intuitive control layout ensures users can easily access all necessary functions without distraction. Additionally, the mower's compact design allows for easy storage and transportation.

Safety is paramount, and the Snapper 500Z incorporates various safety features. The operator presence control system ensures that the mower will not operate unless the user is seated, reducing the risk of accidents. Additionally, the durable roll-over protection structure (ROPS) provides an added layer of safety during operation.

In conclusion, the Snapper 500Z combines powerful performance, advanced technology, and user-friendly design to create an exceptional mowing experience. With its reliable engine, versatile cutting deck, and comfort-focused features, the Snapper 500Z is a standout choice for anyone looking to maintain a pristine lawn.
Top Page Image Contents