Snapper S200X/72, S200XKAV2761, S200XBV32 Servicing The Mower Blades, Inspecting the Mower Blades

Page 32

Maintenance

Regular Maintenance

Servicing The Mower Blades

Removing the Mower Blade

CAUTION

Avoid injury! Mower blades are sharp.

•Always wear gloves when handling mower blades or working near blades.

1.To remove the mower blade, use a 1” wrench on the flats of the spindle shaft and remove the mower blade mounting bolt with a 15/16” wrench (Figure 27).

2.If there are no flats on the spindle shaft, wedge a wooden block between the mower blade and the mower deck housing to keep the mower blade from turning.

Inspecting the Mower Blades

DANGER

Avoid injury! A worn or damaged blade can break, and a piece of the mower blade could be thrown into the operator’s or bystander’s area, resulting in serious personal injury or death.

•Inspect the mower blade every 25 hours or at least once a year.

•If the mower blade hits a solid object, stop the engine immediately and inspect the mower blade.

•Never weld or straighten bent mower blades.

1.Remove the mower blade from the unit. See Removing the Blade.

2.Inspect the mower blade (Figures 28 & 29). Discard the mower blade if it has any of the below conditions.

A.) Has more than .5” (12,7 mm) of the mower blade metal removed from previous sharpening or wear (D, Figure 28).

B.) The air lifts are excessively eroded (B & C, Figure

29) and the notch (C) is .25” (6,35 mm) deep or greater.

C.) Mower blade is bent or broken.

3.If the cutting edges are not sharp or have nicks, sharpen the blades. See Sharpening the Mower Blades.

Figure 27. Loosening the Mower Blade for Removal

B

A

C

A

D

 

C

 

Figure 28. inspecting the Mower Blade Tips

A.Mower Blade Cutting Edge

B.Square Corner

C.Air Lift

D.Wear Measurement - DISCARD Mower Blade If greater than .5” (12,7 mm)

A B

Figure 29. inspecting the Mower Blade Air Lifts

C

A.New Mower Blade

B.Mower Blade at Wear Limit (A notch begins to form)

C.Mower Blade in Dangerous Condition (Notch measures .25” (6,35 mm) or greater DO NOT USE. Replace with new mower blade.)

30

www.SnapperPro.com

Page 31 Page 33
Image 32
Page 31 Page 33
Contents OPERATOR’S Manual Date Purchased Table of Contents Children Operating SafetyRead the Manual Moving Parts Slope OperationThrown Objects Overhead Obstacles Roll BAR USERetaining WALLS, DROP-OFFS, and Water Fuel and Maintenance Enclosed AreasOperation TrainingPreparation Ignition System Gasoline Models Towed Equipment RIDE-ON UnitsEmissions Service and Maintenance Safe Handling of GasolineRoll BAR Instructions Operational WarningsInspection and Maintenance of the Roll BAR Seat Belt Safety Decals Safety Interlock System Operational Safety ChecksSafety Icons North American Safety IconsFeatures and Controls Identification NumbersSeat Adjustment Lever Ignition SwitchControl Functions Ground Speed LeversPTO Power Take Off Switch Hour Meter / Maintenance ReminderParking Brake Throttle ControlGeneral Operating Safety Checks Before StartingCheck Tire Pressures Seat AdjustmentSeat Adjustment Suspension Seat To adjust pedal position Mowing Height AdjustmentFoot Pedal Adjustment Lower the roll bar only when necessary and Never remove it Raise and Lower the Roll BarKeep roll bar in the raised position and use the seat belt To Lower the Roll BarPushing the Rider By Hand Starting the EngineStopping the Rider Forward Reverse Travel Zero Turn Driving PracticeForward Travel Practice Practice Turning Around a Corner Practice Turning In PlaceExecuting an End-Of-Row Zero Turn Executing TurnsMowing Mowing RecommendationsHeight of Grass Tall Grass Requires Incremental CuttingMowing Methods Attaching a Trailer Proper MulchingMulching Requires Excellent Mowing Conditions Engine Speed & Ground Speed for MulchingHours Fall Check Rider / Mower for loose hardware Maintenance ScheduleSafety Items Before Every Spring Engine Maintenance Checking / Adding FuelFuel Filter Change Oil & FilterLubrication GreaseOil Lubricating the Front CastersChange Interval Every 250 Hours Filter Part Number Check Hydraulic Oil LevelChange Hydraulic Oil Filter Never weld or straighten bent mower blades Servicing The Mower BladesInspecting the Mower Blades Reinstalling the Mower Blades Balancing the Mower Blade NailGround Speed Control Lever Adjustment Speed Balancing AdjustmentNeutral Adjustment Parking Brake AdjustmentReturn-To-Neutral Adjustment Deck Rod Timing Adjustment Deck Leveling AdjustmentMower Belt Replacement To avoid damaging belts, do not PRY Belts Over PulleysHydraulic Pump Drive Belt Replacement Use extreme caution when removing this springBattery Maintenance Battery Service Checking Battery VoltageCharging a Completely Discharged Battery Jump Starting With Auxiliary Booster BatteryStarter Switch Jumper Cable Starting Vehicle Battery Jumper Cable To Ground Engine BlockStorage Starting After Long Term StorageTemporary Storage 30 Days Or Less Long Term Storage Longer Than 30 DaysProblem Cause Remedy Troubleshooting ChartTroubleshooting the Rider Troubleshooting Troubleshooting Common Cutting Problems StreakingSpecifications HP KawasakiHP Kohler HP Briggs & StrattonFerris Limited Warranty Chassis TractorMower Deck

S200XKOH2761, S200XKAV2561, S200XBV32, S200X/72, S200XKAV2761 specifications

The Snapper S200 series is a versatile lineup of lawn care equipment designed for both residential and commercial landscaping needs. The models S200XKAV2761, S200X/72, S200XBV32, S200XKAV2561, and S200XKOH2761 are part of this series, offering robust features and advanced technologies to enhance mowing efficiency and user comfort.

The S200XKAV2761 stands out with its powerful engine that delivers optimal performance, ensuring efficient grass cutting even in thicker patches. It features a wide cutting deck that significantly reduces the time spent mowing larger areas. The innovative Easy Start technology allows users to start the engine with minimal effort, making it ideal for both seasoned users and newcomers to lawn maintenance.

Next, the S200X/72 model is characterized by its impressive 72-inch cutting deck, making it one of the most suitable options for commercial applications. This wider deck allows for less time spent mowing and more time enjoying a beautifully manicured lawn. The model incorporates premium ergonomic controls, ensuring that operators can maneuver the machine effortlessly while maintaining comfort during extended use.

The S200XBV32 model features a unique bagging system that captures grass clippings efficiently, reducing the need for additional cleanup after mowing. This model utilizes a two-stage air filtration system that prolongs engine life while boosting power, thus enhancing productivity without compromising performance.

The S200XKAV2561 is designed with adjustable cutting heights, allowing users to customize their mowing experience according to lawn conditions. This flexibility is crucial for maintaining a healthy lawn and adapting to seasonal growth patterns. Plus, the durable chassis construction offers enhanced stability and longevity, making it a reliable choice for various terrains.

Lastly, the S200XKOH2761 model incorporates advanced hydrostatic transmission technology, allowing for a smooth and responsive driving experience. This feature is particularly beneficial when navigating tight corners and intricate landscaping. Furthermore, the model is equipped with a heavy-duty steel frame, ensuring durability and resilience against wear and tear.

In conclusion, the Snapper S200 series provides a range of models tailored to meet diverse landscaping demands. With their powerful engines, innovative features, and advanced technologies, these machines are designed to make lawn care more efficient and enjoyable for users of all skill levels. Whether for residential use or professional landscaping, the Snapper S200 lineup is an excellent investment in maintaining a pristine outdoor space.
Top Page Image Contents