Snapper S200XBV32, S200XKAV2761, S200X/72 manual Troubleshooting Common Cutting Problems, Streaking

Page 46

Troubleshooting

Troubleshooting

Troubleshooting Common Cutting Problems

Problem

Cause

Remedy

Streaking.

1.

Blades are not sharp.

1.

Sharpen your blades.

 

2.

Blades are worn down to far.

2.

Replace your blades.

 

3.

Engine speed is too slow.

3.

Always mow at full throttle.

 

4.

Ground speed is too fast.

4.

Slow down.

 

5.

Deck is plugged with grass

5.

Clean out the mower.

 

6.

Not overlapping cutting rows

6.

Overlap your cutting rows.

 

 

enough.

 

 

 

7.

Not overlapping enough when

7.

When turning your effective cutting width

 

 

turning.

 

decreases–overlap more when turning.

Scalping.

1.

Lawn is uneven or bumpy.

1.

Roll or level the lawn.

 

2.

Mower deck cutting height is

2.

Raise the cutting height.

 

 

set too low.

 

 

 

3.

Ground speed is too fast.

3.

Slow down.

 

4.

Deck is not leveled correctly.

4.

Correctly level the deck.

 

5.

Tire pressure is low or uneven

5.

Check and inflate the tires.

Stepped Cutting.

1.

Deck is not leveled correctly.

1.

Level the deck correctly.

 

2.

Tires are not properly inflated.

2.

Check and inflate the tires.

 

3.

Blades are damaged.

3.

Replace the blades.

 

4.

Deck shell is damaged.

4.

Repair or replace the deck.

 

5.

Mower spindle is bent or loose.

5.

Repair or replace the spindle.

 

6.

Blades are installed incorrectly.

6.

Reinstall the blades correctly.

Uneven Cutting.

1.

Deck is not leveled correctly.

1.

Level the deck correctly.

 

2.

Blades are dull or worn.

2.

Sharpen or replace the blades.

 

3.

Blades are damaged.

3.

Replace the blades.

 

4.

Deck is clogged with grass

4.

Clean out the deck.

 

 

clippings.

 

 

 

5.

Deck shell is damaged.

5.

Repair or replace the deck.

 

6.

Mower spindle is bent or loose.

6.

Repair or replace the spindle.

 

7.

Blades are installed incorrectly.

7.

Reinstall the blades correctly.

 

8.

Tires are not properly inflated.

8.

Check and inflate the tires.

Stingers.

1.

Blades are not sharp or nicked.

1.

Sharpen your blades.

 

2.

Blades are worn down too far.

2.

Replace your blades.

 

3.

Engine speed is too slow.

3.

Always mow at full throttle.

 

4.

Ground speed is too fast.

4.

Slow down.

 

5.

Deck is plugged with grass.

5.

Clean out the mower.

44

www.SnapperPro.com

Image 46
Contents OPERATOR’S Manual Date Purchased Table of Contents Read the Manual Operating SafetyChildren Thrown Objects Slope OperationMoving Parts Retaining WALLS, DROP-OFFS, and Water Roll BAR USEOverhead Obstacles Fuel and Maintenance Enclosed AreasPreparation TrainingOperation Emissions Towed Equipment RIDE-ON UnitsIgnition System Gasoline Models Service and Maintenance Safe Handling of GasolineRoll BAR Instructions Operational WarningsInspection and Maintenance of the Roll BAR Seat Belt Safety Decals Safety Icons Safety Interlock SystemOperational Safety Checks North American Safety IconsFeatures and Controls Identification NumbersControl Functions Seat Adjustment LeverIgnition Switch Ground Speed LeversParking Brake PTO Power Take Off SwitchHour Meter / Maintenance Reminder Throttle ControlGeneral Operating Safety Checks Before StartingSeat Adjustment Suspension Seat Seat AdjustmentCheck Tire Pressures Foot Pedal Adjustment Mowing Height AdjustmentTo adjust pedal position Keep roll bar in the raised position and use the seat belt Lower the roll bar only when necessary and Never remove itRaise and Lower the Roll Bar To Lower the Roll BarStopping the Rider Starting the EnginePushing the Rider By Hand Forward Travel Practice Zero Turn Driving PracticeForward Reverse Travel Executing an End-Of-Row Zero Turn Practice Turning Around a CornerPractice Turning In Place Executing TurnsHeight of Grass MowingMowing Recommendations Tall Grass Requires Incremental CuttingMowing Methods Mulching Requires Excellent Mowing Conditions Attaching a TrailerProper Mulching Engine Speed & Ground Speed for MulchingSafety Items Before Every Spring Maintenance ScheduleHours Fall Check Rider / Mower for loose hardware Fuel Filter Engine MaintenanceChecking / Adding Fuel Change Oil & FilterOil LubricationGrease Lubricating the Front CastersChange Hydraulic Oil Filter Check Hydraulic Oil LevelChange Interval Every 250 Hours Filter Part Number Inspecting the Mower Blades Servicing The Mower BladesNever weld or straighten bent mower blades Reinstalling the Mower Blades Balancing the Mower Blade NailGround Speed Control Lever Adjustment Speed Balancing AdjustmentNeutral Adjustment Parking Brake AdjustmentReturn-To-Neutral Adjustment Deck Rod Timing Adjustment Deck Leveling AdjustmentMower Belt Replacement To avoid damaging belts, do not PRY Belts Over PulleysHydraulic Pump Drive Belt Replacement Use extreme caution when removing this springBattery Maintenance Charging a Completely Discharged Battery Battery ServiceChecking Battery Voltage Jump Starting With Auxiliary Booster BatteryStarter Switch Jumper Cable Starting Vehicle Battery Jumper Cable To Ground Engine BlockTemporary Storage 30 Days Or Less StorageStarting After Long Term Storage Long Term Storage Longer Than 30 DaysTroubleshooting the Rider Troubleshooting ChartProblem Cause Remedy Troubleshooting Troubleshooting Common Cutting Problems StreakingHP Kohler SpecificationsHP Kawasaki HP Briggs & StrattonFerris Limited Warranty Mower Deck TractorChassis

S200XKOH2761, S200XKAV2561, S200XBV32, S200X/72, S200XKAV2761 specifications

The Snapper S200 series is a versatile lineup of lawn care equipment designed for both residential and commercial landscaping needs. The models S200XKAV2761, S200X/72, S200XBV32, S200XKAV2561, and S200XKOH2761 are part of this series, offering robust features and advanced technologies to enhance mowing efficiency and user comfort.

The S200XKAV2761 stands out with its powerful engine that delivers optimal performance, ensuring efficient grass cutting even in thicker patches. It features a wide cutting deck that significantly reduces the time spent mowing larger areas. The innovative Easy Start technology allows users to start the engine with minimal effort, making it ideal for both seasoned users and newcomers to lawn maintenance.

Next, the S200X/72 model is characterized by its impressive 72-inch cutting deck, making it one of the most suitable options for commercial applications. This wider deck allows for less time spent mowing and more time enjoying a beautifully manicured lawn. The model incorporates premium ergonomic controls, ensuring that operators can maneuver the machine effortlessly while maintaining comfort during extended use.

The S200XBV32 model features a unique bagging system that captures grass clippings efficiently, reducing the need for additional cleanup after mowing. This model utilizes a two-stage air filtration system that prolongs engine life while boosting power, thus enhancing productivity without compromising performance.

The S200XKAV2561 is designed with adjustable cutting heights, allowing users to customize their mowing experience according to lawn conditions. This flexibility is crucial for maintaining a healthy lawn and adapting to seasonal growth patterns. Plus, the durable chassis construction offers enhanced stability and longevity, making it a reliable choice for various terrains.

Lastly, the S200XKOH2761 model incorporates advanced hydrostatic transmission technology, allowing for a smooth and responsive driving experience. This feature is particularly beneficial when navigating tight corners and intricate landscaping. Furthermore, the model is equipped with a heavy-duty steel frame, ensuring durability and resilience against wear and tear.

In conclusion, the Snapper S200 series provides a range of models tailored to meet diverse landscaping demands. With their powerful engines, innovative features, and advanced technologies, these machines are designed to make lawn care more efficient and enjoyable for users of all skill levels. Whether for residential use or professional landscaping, the Snapper S200 lineup is an excellent investment in maintaining a pristine outdoor space.