Dynacord DPM 4000 manual Audio Routing, Volume And Tone Controls / Delays

Page 10

SYSTEM DESCRIPTION

normal operation, PC-interaction is not necessary. Anyway, in most cases the permanent connection of a computer bears benefits, like displaying detailed status reports or the printing of protocols. It also offers the possibility for remote diagnosis and remote maintenance via modem.

3.2Audio Routing

The DPM 4000 employs a digital audio matrix providing 4 inputs and 4 outputs. Additional matrix junctions for the integrated gong and alarm signal generators, the vocal recording/playback unit, and the lock-on of the pilot tone and its evaluation are incorporated. All input signals and internally generated signals can be freely mixed inside the matrix and outputted through the 4 amplifier channels. Routing speaker lines to these amplifier channels is achieved via the relay- matrix, which offers up to four separate audio buses simultaneously, while the DPM 4000 takes over the management of all these signals according to their priority.

Next to connecting paging stations, the audio inputs also serve for the connection of other audio sound sources, like microphones, mixers, CD-players, cassette decks and DAT-recorders, tuners, etc. Several different input modules are available to optimally adjust and match signal levels and connections.

3.3Volume And Tone Controls / Delays

The PROANNOUNCE system provides individual volume controls for each input, output, and paging station. Even the internal audio sources, like gong/alarm tone generators, voice message playback, and pilot tone generator employ individual level controls, each. Additionally, it is possible to set an attenuation that unanimously affects the inputs. This value determines the degree, by which the input signal is attenuated during the reproduction of messages or other signals with a higher priority setting. This allows to smoothly fade-out and fade-in background music during the transmission of important messages.

Besides, each of the four inputs embodies three fully parametric digital filters allowing for optimal tone control. The filters provide different filter types like Hi-/Lo pass filters, shelving filters, and peak-dip-filters providing the possibility for adjusting the sound within the entire audio transmission range. Factory-preset filter settings for the DPC 4000 Series paging stations are already provided.

Setting volume levels and filter parameters is accomplished via PC during the configuration procedure. Further, it is possible to alter any volume setting during the later operation of the system via special-function keys on the paging stations or through external controls that are connected to analog or digital control inputs.

All four outputs employ digital delays allowing signal delays of up to 330 ms per channel. Natural delays, resulting from loudspeaker positioning which causes time differences in the traveling of sonic events or environmental circumstances related to architectural characteristics of the location, can be equalized without additional effort.

3.4Signal Generators / Voice Message Memory

The DPM 4000 provides a variety of tone generators for the generation of gong, alarm, and text signals. Signal generation is realized through DSP-algorithms, which are extremely flexible in use, so that they can be adjusted to match nearly any possible application. Factory presets include 6 different gong signals, 18 different alarm signals, plus sine cycle at any frequency. Other than in comparable equipment, the PROANNOUNCE signal generating DSP- algorithms do not take up any extra storage of the voice message memory.

In addition, a voice message recording/playback module providing CD-quality sound is optionally available. With a total recording time of approximately 6 minutes, 25 different messages are being managed. The DPM 4000 provides the possibility to install up to four optional FLASH-memory modules, depending on individual desires or requirements.

3-2

PROANNOUNCE System User Handbook 1.1

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Page Page Introduction PreambleSafety Instructions Operation InstructionsProannounce System User Handbook Operation Instructions Central Unit DPM DPC 4000 Paging Stations DPA 4000 Power AmplifierDPP 4000 Power Supply Units DCS 400 Control SystemExcluded From Warranty Operation LocationSystem Description General OverviewSignal Generators / Voice Message Memory Volume And Tone Controls / DelaysAudio Routing Clock / Calendar Paging StationsControl Inputs And Outputs MonitoringMacros Safety StandardsInterfaces Installation And Program Start System Specifications Software InstallationUninstalling Proannounce Designer Starting Proannounce DesignerDigital Proannounce Manager DPM Features Description Of Individual DevicesDPM Front View Rear View Signal Pins Description +24V ==DC Input 24V == Remote Control socket RS-232 PC InterfaceSlots for Audio Output Modules Monitor Output socketExtension slot Control Module Slot Audio Input Module SlotsSupply voltage SpecificationsMonitor input Specifications 5 2-Channel Paging Station Module NRSPin-Assignment Of DPC 4000 Connectors And The Extension Cord Block DiagramRetrofitting Input Transformers Specifications 6 MIC/LINE + 2 AUX Input Module NRSBlock diagram Pin-Assignment Of XLRF-Type ConnectorsInternal Settings Retrofitting Input Transformers 7 2-Channel MIC/LINE Input Module NRS DPM MLIOpen 24 dBu Retrofitting Input Transformers 8 2-Channel AUX Input Module NRS DPM AUXBlock diagram 2-channel AUX input module 9 MIC/LINE + Paging Station Module NRS 22 MIC/LINE + paging station module NRSPin-Assignment Of RJ-45 Socket And Extension Cord Audio 24V/GNDBlock diagram MIC/LINE + paging station module Retrofitting Input Transformers 10 2-Channel Line Output Module NRS DPM OUTPin-Assignment Of XLRM-Type Connectors Setting Output Levels Via JumpersRetrofitting Output Transformers 11 8 I/O Control Module NRS 31 8 I/O control modulePin-Assignment Of RJ-45 Connectors Slave clocksFlash Memory for Voice Recording/Playback NRS Internal Message RecorderProannounce DPC 4000 Paging Consoles System Overview Paging Console Functions Table of all functionsSelection Keys and LED’s Cancel keyControl Panel Of The DPC ALL key and LEDTalk key and BUSY-LED Alarm key and IndicatorText key and LED On key and LEDDisplay ConnectionsMicrophone LAN socketKey-Labeling Tested printer models are HP LaserJet 6PSelective Call Gong Chime SignalOperation Collective CallCanceling Signals General AlarmSelective Alarm Text MessageProgram Assignment System on / OFFSpecial Functions Paging Console Configuration In Setup Mode AddressCompressor Pre-Gong SignalBuzzer LCD-ContrastIndications LEDDPC 4350 Paging Station Extension PrioritiesCombination Factory Presets Specifications DPCChange from Switch to Pushbutton Optionally Available AccessoriesOptional Alarm Key NRS Optional Key-lock Switch NRS Input / Output Transformer NRS Optional Monitor Loudspeaker NRS Connecting External Audio Signal Sources Connecting a PTT-MicrophoneExternal MIC / Line Input EXT socket Single Paging Station On a Single DPM-Line Cable LengthSingle Paging Station + Extension On a Single DPM-Line DPA 4000 Proannounce Power Amplifier Characteristics Instructions For Using Remote-Power Amps Four-Channel Power Amplifier DPA ControlControl DCS 400 Control System Characteristics Operating current FeaturesOperating voltage Operating current at 24Dimensions of the DCS 401 module DCSDCS 408 Relay Module 100 Dimensions of the DCS 408 module DCSContact current, maximum Operating temperature range Operating current, all relays pulled, at 24Maximally 12 DCS 408 / DCS 409 modules can be Operating current, all inputs open Power source 24V CN6 Maximum output currentOperating current, all inputs at +24VOUT -24VOUT Output DCS 416 Analog Input / Output Module DCS 416 analog I/O moduleDAC Dimensions W x H x D 19 2HU Specifications Operating voltageOperating temperature range Weight Audio input Input voltage 0 dB LED+10 Operation keys Function+ 24 NRS 90240 Rotary Encoder Page Proannounce Hardware Configuration 1 DCS CablingDCS 401 Addresses Voltage SupplyBefore initial operation DMM 4650 Interconnection DMM DPMNRS 90226 Adapter Printed Board Assembly

DPM 4000 specifications

The Dynacord DPM 4000 is a high-performance digital power mixer designed to cater to the needs of live sound engineers, musicians, and audio professionals. It offers an extensive range of features and cutting-edge technologies, making it the go-to choice for both small venues and large-scale productions.

One of the standout features of the DPM 4000 is its intuitive user interface. The large, bright LCD screen provides clear visibility of all essential parameters, allowing for quick adjustments even in low-light conditions. The mixer includes a comprehensive built-in effects processor, featuring multiple reverb, delay, and modulation effects that can be applied to individual channels or the overall mix. This capability provides sound engineers with the tools they need to enhance their audio output effortlessly.

The DPM 4000 is equipped with a robust 16-channel configuration, providing ample input options for microphones, instruments, and other audio sources. Each channel is fully equipped with EQ controls, gain adjustments, and auxiliary sends, allowing for precise shaping of the sound. The mixer also supports multi-track recording via USB, making it easy for users to capture performances directly to a computer.

In terms of connectivity, the Dynacord DPM 4000 excels with multiple options including XLR, TRS, and RCA inputs. Its flexible routing capabilities enable sound engineers to customize their signal flow, enhancing both versatility and convenience during live performances. Additionally, the mixer supports remote control through dedicated software applications, enabling users to manage settings from a distance, a significant advantage for live sound applications.

The DPM 4000 features advanced thermal management technology, ensuring the unit remains cool during long operational periods. This is critical for maintaining optimal performance and longevity. The built-in power amplifier delivers impressive wattage, suitable for driving various loudspeaker systems while maintaining sound clarity and fidelity.

Another notable characteristic is its rugged construction, built to withstand the rigors of touring and frequent usage. The design ensures durability in diverse environmental conditions while maintaining aesthetic appeal.

In summary, the Dynacord DPM 4000 is a versatile and powerful digital power mixer, offering a blend of user-friendly features, comprehensive control, and robust performance. Whether used in a live sound setting or for recorded sessions, it stands out as an exceptional tool for audio professionals committed to delivering high-quality sound.
Top Page Image Contents