Dynacord DPM 4000 manual Specifications, Supply voltage, Monitor input

Page 21

5.1.4 Specifications

Supply voltage

Nominal power consumption Maximum power consumption

Audio section

Inputs

Outputs

Frequency Response

S/N ratio

Distortion

24 V output Ready output Logic inputs

Voltage with input OFF (LOW) Voltage with input ON (HIGH) Maximum input voltage

DCF77 input

RS-232 interface

Remote interface Serial port Supply output

Supply voltage Nominal current

Monitor input

Nominal input level Max. input level Input balance

Monitor output

Output level

Output power handling

Operating temperature range

Dimensions W x H x D

Installation depth

Weight

Optionally available extensions

DEVICE DESCRIPTIONS

24 V DC (21.6 ... 31.2 V DC)

500mA

6.7 A

see specifications of the corresponding input module see specifications of the corresponding output module 20 Hz ... 20 kHz, ￿ 0.5 dB

>100 dB (A-weighted) < 0.01 %

24 V DC / 400 mA max. (21.6 ... 31.2 V DC) floating relay contacts, 1 A / 24 V DC

2, floating via opto-coupler, bi-pole UIN < ￿ 5 V

UIN > ￿ 10 V

UIN max = ￿ 31 V

2-pole, for the NRS 90193, DCF 77 receiver

19,200 Baud, 8 data bits, 1 stop bit, no parity, Xon/Xoff

RS-485 standard

short-circuit-proof, electronically programmable fuse 24 V DC (21.6 ... 31.2 V DC)

330 mA, 660 mA, 990 mA (selectable, electronic fuse) electronically balanced, transformer optionally available +2.2 dBu / 1 V

+10 dBu / 2.5 V > -30 dB

6.3 mm phone jack, either for the connection of headphones or speakers

with headphones:

650 mV / -1.5 dBu

with loudspeakers:

1.8 V / 7.2 dBu

with headphones:

50 mW / 8 ￿

with loudspeakers:

380 mW / 8 ￿

+5 ￿C ... +40 ￿C

19“, 2 HE 483 x 88 x 337 mm

340 mm (410 mm incl. connectors)

6.4 kg

NRS 90208 input transformer for 1 monitor input, order no. 121 641

PROANNOUNCE System User Handbook 1.1

5-7

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Page Page Preamble IntroductionOperation Instructions Safety InstructionsProannounce System User Handbook Operation Instructions Central Unit DPM DPP 4000 Power Supply Units DPA 4000 Power AmplifierDPC 4000 Paging Stations DCS 400 Control SystemOperation Location Excluded From WarrantyGeneral Overview System DescriptionVolume And Tone Controls / Delays Signal Generators / Voice Message MemoryAudio Routing Control Inputs And Outputs Paging StationsClock / Calendar MonitoringSafety Standards MacrosInterfaces Software Installation Installation And Program Start System SpecificationsStarting Proannounce Designer Uninstalling Proannounce DesignerDescription Of Individual Devices Digital Proannounce Manager DPM FeaturesDPM Front View Signal Pins Description +24V == Rear ViewDC Input 24V == RS-232 PC Interface Remote Control socketExtension slot Control Module Slot Monitor Output socketSlots for Audio Output Modules Audio Input Module SlotsSpecifications Supply voltageMonitor input 5 2-Channel Paging Station Module NRS SpecificationsBlock Diagram Pin-Assignment Of DPC 4000 Connectors And The Extension CordRetrofitting Input Transformers 6 MIC/LINE + 2 AUX Input Module NRS SpecificationsPin-Assignment Of XLRF-Type Connectors Block diagramInternal Settings Retrofitting Input Transformers DPM MLI 7 2-Channel MIC/LINE Input Module NRSOpen 24 dBu Retrofitting Input Transformers DPM AUX 8 2-Channel AUX Input Module NRSBlock diagram 2-channel AUX input module 22 MIC/LINE + paging station module NRS 9 MIC/LINE + Paging Station Module NRSAudio 24V/GND Pin-Assignment Of RJ-45 Socket And Extension CordBlock diagram MIC/LINE + paging station module Retrofitting Input Transformers DPM OUT 10 2-Channel Line Output Module NRSSetting Output Levels Via Jumpers Pin-Assignment Of XLRM-Type ConnectorsRetrofitting Output Transformers 31 8 I/O control module 11 8 I/O Control Module NRSSlave clocks Pin-Assignment Of RJ-45 ConnectorsInternal Message Recorder Flash Memory for Voice Recording/Playback NRSProannounce DPC 4000 Paging Consoles System Overview Table of all functions Paging Console FunctionsControl Panel Of The DPC Cancel keySelection Keys and LED’s ALL key and LEDText key and LED Alarm key and IndicatorTalk key and BUSY-LED On key and LEDMicrophone ConnectionsDisplay LAN socketTested printer models are HP LaserJet 6P Key-LabelingOperation Gong Chime SignalSelective Call Collective CallSelective Alarm General AlarmCanceling Signals Text MessageSystem on / OFF Program AssignmentSpecial Functions Address Paging Console Configuration In Setup ModeBuzzer Pre-Gong SignalCompressor LCD-ContrastLED IndicationsPriorities DPC 4350 Paging Station ExtensionCombination Factory Presets DPC SpecificationsOptionally Available Accessories Change from Switch to PushbuttonOptional Alarm Key NRS Optional Key-lock Switch NRS Input / Output Transformer NRS Optional Monitor Loudspeaker NRS Connecting a PTT-Microphone Connecting External Audio Signal SourcesExternal MIC / Line Input EXT socket Cable Length Single Paging Station On a Single DPM-LineSingle Paging Station + Extension On a Single DPM-Line DPA 4000 Proannounce Power Amplifier Characteristics Instructions For Using Remote-Power Amps Control Four-Channel Power Amplifier DPAControl DCS 400 Control System Characteristics Operating voltage FeaturesOperating current Operating current at 24DCS Dimensions of the DCS 401 moduleDCS 408 Relay Module 100 DCS Dimensions of the DCS 408 moduleOperating current, all relays pulled, at 24 Contact current, maximum Operating temperature rangeMaximally 12 DCS 408 / DCS 409 modules can be Power source 24V CN6 Maximum output current Operating current, all inputs openOperating current, all inputs at +24VOUT -24VOUT Output DCS 416 analog I/O module DCS 416 Analog Input / Output ModuleDAC Operating temperature range Specifications Operating voltageDimensions W x H x D 19 2HU Weight Audio input Input voltage 0 dB LEDOperation keys Function +10+ 24 NRS 90240 Rotary Encoder Page Cabling Proannounce Hardware Configuration 1 DCSVoltage Supply DCS 401 AddressesBefore initial operation DMM DPM DMM 4650 InterconnectionNRS 90226 Adapter Printed Board Assembly

DPM 4000 specifications

The Dynacord DPM 4000 is a high-performance digital power mixer designed to cater to the needs of live sound engineers, musicians, and audio professionals. It offers an extensive range of features and cutting-edge technologies, making it the go-to choice for both small venues and large-scale productions.

One of the standout features of the DPM 4000 is its intuitive user interface. The large, bright LCD screen provides clear visibility of all essential parameters, allowing for quick adjustments even in low-light conditions. The mixer includes a comprehensive built-in effects processor, featuring multiple reverb, delay, and modulation effects that can be applied to individual channels or the overall mix. This capability provides sound engineers with the tools they need to enhance their audio output effortlessly.

The DPM 4000 is equipped with a robust 16-channel configuration, providing ample input options for microphones, instruments, and other audio sources. Each channel is fully equipped with EQ controls, gain adjustments, and auxiliary sends, allowing for precise shaping of the sound. The mixer also supports multi-track recording via USB, making it easy for users to capture performances directly to a computer.

In terms of connectivity, the Dynacord DPM 4000 excels with multiple options including XLR, TRS, and RCA inputs. Its flexible routing capabilities enable sound engineers to customize their signal flow, enhancing both versatility and convenience during live performances. Additionally, the mixer supports remote control through dedicated software applications, enabling users to manage settings from a distance, a significant advantage for live sound applications.

The DPM 4000 features advanced thermal management technology, ensuring the unit remains cool during long operational periods. This is critical for maintaining optimal performance and longevity. The built-in power amplifier delivers impressive wattage, suitable for driving various loudspeaker systems while maintaining sound clarity and fidelity.

Another notable characteristic is its rugged construction, built to withstand the rigors of touring and frequent usage. The design ensures durability in diverse environmental conditions while maintaining aesthetic appeal.

In summary, the Dynacord DPM 4000 is a versatile and powerful digital power mixer, offering a blend of user-friendly features, comprehensive control, and robust performance. Whether used in a live sound setting or for recorded sessions, it stands out as an exceptional tool for audio professionals committed to delivering high-quality sound.
Top Page Image Contents