Dynacord DPM 4000 manual 11 8 I/O Control Module NRS, 31 8 I/O control module

Page 40

DEVICE DESCRIPTIONS

5.1.11 8 I/O Control Module (NRS 90219)

This control module provides 8 floating control inputs and 7 floating logic level outputs (0 V, 24 V). An additional output provides pole change impulses for controlling slave system clocks. Contact is established via 4 x RJ-45 sockets providing 8 contacts each. The module can be installed in slot 5.

The slave clock output (NU, OUT 1) is short-circuit proof; up to approximately 40 slave clocks can be connected. Please make sure to connect all slave clocks according to their correct polarity.

The control outputs (OUT 2 - 8) are capable of switching voltages of either polarity and up to a maximum current of 1 A.

The control inputs (IN 1 - 8) are capable of handling voltages of either polarity between -31 V and +31 V; for voltages between 0 and 5 V the inputs are not active (low), for voltages between 10 V and 31 V the inputs are active (high). The control inputs can ignite switching functions or macros either during a change of state or in any stationary state. This offers the possibility to monitor line idling currents (e. g. in fire alert system installations).

figure 5.31 8 I/O control module

Note: The opto-coupler inputs are primarily meant to prevent noise loops that can result from dropping voltages in long distance cabling. They are not suitable for separating networks from each other. Therefore, only floating sources should be connected.

Specifications:

description

DPM-LC8 8 I/O control module, NRS 90219

connections

4 x RJ-45 sockets

logic inputs

8, floating via opto-coupler, bi-polar

voltage when the input is LOW

UIN < ￿ 5 V

voltage when the input is HIGH

UIN > ￿ 10 V

maximum input voltage

UIN max = ￿ 31 V

logic outputs

7, floating via relay contacts

contact capacity

1 A / 24 V DC

slave clock output

pole change impulse / turning impulse

output voltage

24 V DC

maximum output current

500 mA, electronically protected against overload

power consumption

3.2 W (12 W with the maximum amount of slave clocks connected)

operational temperature range

+5 ￿C ... +40 ￿C

dimensions W x H x D

37.5 x 81 x 247 mm

weight

195 g

5-26

PROANNOUNCE System User Handbook 1.1

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Page Page Introduction PreambleSafety Instructions Operation InstructionsProannounce System User Handbook Operation Instructions Central Unit DPM DPA 4000 Power Amplifier DPP 4000 Power Supply UnitsDPC 4000 Paging Stations DCS 400 Control SystemExcluded From Warranty Operation LocationSystem Description General OverviewSignal Generators / Voice Message Memory Volume And Tone Controls / DelaysAudio Routing Paging Stations Control Inputs And OutputsClock / Calendar MonitoringMacros Safety StandardsInterfaces Installation And Program Start System Specifications Software InstallationUninstalling Proannounce Designer Starting Proannounce DesignerDigital Proannounce Manager DPM Features Description Of Individual DevicesDPM Front View Rear View Signal Pins Description +24V ==DC Input 24V == Remote Control socket RS-232 PC InterfaceMonitor Output socket Extension slot Control Module SlotSlots for Audio Output Modules Audio Input Module SlotsSupply voltage SpecificationsMonitor input Specifications 5 2-Channel Paging Station Module NRSPin-Assignment Of DPC 4000 Connectors And The Extension Cord Block DiagramRetrofitting Input Transformers Specifications 6 MIC/LINE + 2 AUX Input Module NRSBlock diagram Pin-Assignment Of XLRF-Type ConnectorsInternal Settings Retrofitting Input Transformers 7 2-Channel MIC/LINE Input Module NRS DPM MLIOpen 24 dBu Retrofitting Input Transformers 8 2-Channel AUX Input Module NRS DPM AUXBlock diagram 2-channel AUX input module 9 MIC/LINE + Paging Station Module NRS 22 MIC/LINE + paging station module NRSPin-Assignment Of RJ-45 Socket And Extension Cord Audio 24V/GNDBlock diagram MIC/LINE + paging station module Retrofitting Input Transformers 10 2-Channel Line Output Module NRS DPM OUTPin-Assignment Of XLRM-Type Connectors Setting Output Levels Via JumpersRetrofitting Output Transformers 11 8 I/O Control Module NRS 31 8 I/O control modulePin-Assignment Of RJ-45 Connectors Slave clocksFlash Memory for Voice Recording/Playback NRS Internal Message RecorderProannounce DPC 4000 Paging Consoles System Overview Paging Console Functions Table of all functionsCancel key Control Panel Of The DPCSelection Keys and LED’s ALL key and LEDAlarm key and Indicator Text key and LEDTalk key and BUSY-LED On key and LEDConnections MicrophoneDisplay LAN socketKey-Labeling Tested printer models are HP LaserJet 6PGong Chime Signal OperationSelective Call Collective CallGeneral Alarm Selective AlarmCanceling Signals Text MessageProgram Assignment System on / OFFSpecial Functions Paging Console Configuration In Setup Mode AddressPre-Gong Signal BuzzerCompressor LCD-ContrastIndications LEDDPC 4350 Paging Station Extension PrioritiesCombination Factory Presets Specifications DPCChange from Switch to Pushbutton Optionally Available AccessoriesOptional Alarm Key NRS Optional Key-lock Switch NRS Input / Output Transformer NRS Optional Monitor Loudspeaker NRS Connecting External Audio Signal Sources Connecting a PTT-MicrophoneExternal MIC / Line Input EXT socket Single Paging Station On a Single DPM-Line Cable LengthSingle Paging Station + Extension On a Single DPM-Line DPA 4000 Proannounce Power Amplifier Characteristics Instructions For Using Remote-Power Amps Four-Channel Power Amplifier DPA ControlControl DCS 400 Control System Characteristics Features Operating voltageOperating current Operating current at 24Dimensions of the DCS 401 module DCSDCS 408 Relay Module 100 Dimensions of the DCS 408 module DCSContact current, maximum Operating temperature range Operating current, all relays pulled, at 24Maximally 12 DCS 408 / DCS 409 modules can be Operating current, all inputs open Power source 24V CN6 Maximum output currentOperating current, all inputs at +24VOUT -24VOUT Output DCS 416 Analog Input / Output Module DCS 416 analog I/O moduleDAC Specifications Operating voltage Operating temperature rangeDimensions W x H x D 19 2HU Weight Audio input Input voltage 0 dB LED+10 Operation keys Function+ 24 NRS 90240 Rotary Encoder Page Proannounce Hardware Configuration 1 DCS CablingDCS 401 Addresses Voltage SupplyBefore initial operation DMM 4650 Interconnection DMM DPMNRS 90226 Adapter Printed Board Assembly

DPM 4000 specifications

The Dynacord DPM 4000 is a high-performance digital power mixer designed to cater to the needs of live sound engineers, musicians, and audio professionals. It offers an extensive range of features and cutting-edge technologies, making it the go-to choice for both small venues and large-scale productions.

One of the standout features of the DPM 4000 is its intuitive user interface. The large, bright LCD screen provides clear visibility of all essential parameters, allowing for quick adjustments even in low-light conditions. The mixer includes a comprehensive built-in effects processor, featuring multiple reverb, delay, and modulation effects that can be applied to individual channels or the overall mix. This capability provides sound engineers with the tools they need to enhance their audio output effortlessly.

The DPM 4000 is equipped with a robust 16-channel configuration, providing ample input options for microphones, instruments, and other audio sources. Each channel is fully equipped with EQ controls, gain adjustments, and auxiliary sends, allowing for precise shaping of the sound. The mixer also supports multi-track recording via USB, making it easy for users to capture performances directly to a computer.

In terms of connectivity, the Dynacord DPM 4000 excels with multiple options including XLR, TRS, and RCA inputs. Its flexible routing capabilities enable sound engineers to customize their signal flow, enhancing both versatility and convenience during live performances. Additionally, the mixer supports remote control through dedicated software applications, enabling users to manage settings from a distance, a significant advantage for live sound applications.

The DPM 4000 features advanced thermal management technology, ensuring the unit remains cool during long operational periods. This is critical for maintaining optimal performance and longevity. The built-in power amplifier delivers impressive wattage, suitable for driving various loudspeaker systems while maintaining sound clarity and fidelity.

Another notable characteristic is its rugged construction, built to withstand the rigors of touring and frequent usage. The design ensures durability in diverse environmental conditions while maintaining aesthetic appeal.

In summary, the Dynacord DPM 4000 is a versatile and powerful digital power mixer, offering a blend of user-friendly features, comprehensive control, and robust performance. Whether used in a live sound setting or for recorded sessions, it stands out as an exceptional tool for audio professionals committed to delivering high-quality sound.
Top Page Image Contents