Dynacord DPM 4000 manual Operation Instructions Central Unit DPM

Page 6

OPERATION INSTRUCTIONS

2.2Operation Instructions

2.2.1 Central Unit DPM 4000

According to its specified capabilities and specifications, the DPM 4000 central unit can be used to control and monitor PA- and paging systems in buildings, but also to operate professional audio systems.

The DPM 4000 central unit is not an independent device. For its operation, at least the following is necessary:

1.A power supply unit (24 V / 4 A) (24 V / 12 A), preferably of the DPP 4000 – Series, depending on the power consumption of the entire system.

2.When the installation includes paging stations:

-the desired amount of paging stations of the DPC 4000 – Series (max. 16)

-all required cables.

3.When the unit's audio section is utilized:

-power amplifiers, preferably of the DPA 4000 – Series, including cabling

-loudspeaker systems including cabling

4.When the integrated real-time clock is going to be synchronized to the DCF77–timesync-signal:

-an active DCF77–antenna for reception (NRS 90193) including cables

This feature is only available in areas where DCF77-reception is strong enough.

5.When slave clocks need to be synchronized:

-the required amount of slave clocks (max. 40) including cabling

Additionally, a PC providing the following features is needed for configuration purposes and operation:

-PC computer system with Pentium processor (min. 90 MHz) and Windows 95/98/NT

-16 MB of RAM

-1 hard disk offering free space of at least 5 MB

-1 x 3.5” floppy drive, 1.44 MB

-1 mouse

-1 monitor (with a resolution of at least 800 x 600 pixels) with VGA-graphics board, 256 colors

-1 serial port RS-232 with serial cable

-PROANNOUNCE Designer configuration software

-1 CD ROM drive

All necessary cables, plugs, connectors or adapters for establishing connections are available through EVI Audio GmbH. Our entire accessory assortment with order-numbers is included in the corresponding owner's manuals as well as in the PA-systems price lists.

PROANNOUNCE System User Handbook 1.1

2-3

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Page Page Introduction PreambleSafety Instructions Operation InstructionsProannounce System User Handbook Operation Instructions Central Unit DPM DPC 4000 Paging Stations DPA 4000 Power AmplifierDPP 4000 Power Supply Units DCS 400 Control SystemExcluded From Warranty Operation LocationSystem Description General OverviewVolume And Tone Controls / Delays Signal Generators / Voice Message MemoryAudio Routing Clock / Calendar Paging StationsControl Inputs And Outputs MonitoringSafety Standards MacrosInterfaces Installation And Program Start System Specifications Software InstallationUninstalling Proannounce Designer Starting Proannounce DesignerDigital Proannounce Manager DPM Features Description Of Individual DevicesDPM Front View Signal Pins Description +24V == Rear ViewDC Input 24V == Remote Control socket RS-232 PC InterfaceSlots for Audio Output Modules Monitor Output socketExtension slot Control Module Slot Audio Input Module SlotsSpecifications Supply voltageMonitor input Specifications 5 2-Channel Paging Station Module NRSPin-Assignment Of DPC 4000 Connectors And The Extension Cord Block DiagramRetrofitting Input Transformers Specifications 6 MIC/LINE + 2 AUX Input Module NRSPin-Assignment Of XLRF-Type Connectors Block diagramInternal Settings Retrofitting Input Transformers 7 2-Channel MIC/LINE Input Module NRS DPM MLIOpen 24 dBu Retrofitting Input Transformers 8 2-Channel AUX Input Module NRS DPM AUXBlock diagram 2-channel AUX input module 9 MIC/LINE + Paging Station Module NRS 22 MIC/LINE + paging station module NRSPin-Assignment Of RJ-45 Socket And Extension Cord Audio 24V/GNDBlock diagram MIC/LINE + paging station module Retrofitting Input Transformers 10 2-Channel Line Output Module NRS DPM OUTPin-Assignment Of XLRM-Type Connectors Setting Output Levels Via JumpersRetrofitting Output Transformers 11 8 I/O Control Module NRS 31 8 I/O control modulePin-Assignment Of RJ-45 Connectors Slave clocksFlash Memory for Voice Recording/Playback NRS Internal Message RecorderProannounce DPC 4000 Paging Consoles System Overview Paging Console Functions Table of all functionsSelection Keys and LED’s Cancel keyControl Panel Of The DPC ALL key and LEDTalk key and BUSY-LED Alarm key and IndicatorText key and LED On key and LEDDisplay ConnectionsMicrophone LAN socketKey-Labeling Tested printer models are HP LaserJet 6PSelective Call Gong Chime SignalOperation Collective CallCanceling Signals General AlarmSelective Alarm Text MessageSystem on / OFF Program AssignmentSpecial Functions Paging Console Configuration In Setup Mode AddressCompressor Pre-Gong SignalBuzzer LCD-ContrastIndications LEDPriorities DPC 4350 Paging Station ExtensionCombination Factory Presets Specifications DPCOptionally Available Accessories Change from Switch to PushbuttonOptional Alarm Key NRS Optional Key-lock Switch NRS Input / Output Transformer NRS Optional Monitor Loudspeaker NRS Connecting a PTT-Microphone Connecting External Audio Signal SourcesExternal MIC / Line Input EXT socket Cable Length Single Paging Station On a Single DPM-LineSingle Paging Station + Extension On a Single DPM-Line DPA 4000 Proannounce Power Amplifier Characteristics Instructions For Using Remote-Power Amps Four-Channel Power Amplifier DPA ControlControl DCS 400 Control System Characteristics Operating current FeaturesOperating voltage Operating current at 24Dimensions of the DCS 401 module DCSDCS 408 Relay Module 100 Dimensions of the DCS 408 module DCSContact current, maximum Operating temperature range Operating current, all relays pulled, at 24Maximally 12 DCS 408 / DCS 409 modules can be Power source 24V CN6 Maximum output current Operating current, all inputs openOperating current, all inputs at +24VOUT -24VOUT Output DCS 416 Analog Input / Output Module DCS 416 analog I/O moduleDAC Dimensions W x H x D 19 2HU Specifications Operating voltageOperating temperature range Weight Audio input Input voltage 0 dB LEDOperation keys Function +10+ 24 NRS 90240 Rotary Encoder Page Proannounce Hardware Configuration 1 DCS CablingVoltage Supply DCS 401 AddressesBefore initial operation DMM 4650 Interconnection DMM DPMNRS 90226 Adapter Printed Board Assembly

DPM 4000 specifications

The Dynacord DPM 4000 is a high-performance digital power mixer designed to cater to the needs of live sound engineers, musicians, and audio professionals. It offers an extensive range of features and cutting-edge technologies, making it the go-to choice for both small venues and large-scale productions.

One of the standout features of the DPM 4000 is its intuitive user interface. The large, bright LCD screen provides clear visibility of all essential parameters, allowing for quick adjustments even in low-light conditions. The mixer includes a comprehensive built-in effects processor, featuring multiple reverb, delay, and modulation effects that can be applied to individual channels or the overall mix. This capability provides sound engineers with the tools they need to enhance their audio output effortlessly.

The DPM 4000 is equipped with a robust 16-channel configuration, providing ample input options for microphones, instruments, and other audio sources. Each channel is fully equipped with EQ controls, gain adjustments, and auxiliary sends, allowing for precise shaping of the sound. The mixer also supports multi-track recording via USB, making it easy for users to capture performances directly to a computer.

In terms of connectivity, the Dynacord DPM 4000 excels with multiple options including XLR, TRS, and RCA inputs. Its flexible routing capabilities enable sound engineers to customize their signal flow, enhancing both versatility and convenience during live performances. Additionally, the mixer supports remote control through dedicated software applications, enabling users to manage settings from a distance, a significant advantage for live sound applications.

The DPM 4000 features advanced thermal management technology, ensuring the unit remains cool during long operational periods. This is critical for maintaining optimal performance and longevity. The built-in power amplifier delivers impressive wattage, suitable for driving various loudspeaker systems while maintaining sound clarity and fidelity.

Another notable characteristic is its rugged construction, built to withstand the rigors of touring and frequent usage. The design ensures durability in diverse environmental conditions while maintaining aesthetic appeal.

In summary, the Dynacord DPM 4000 is a versatile and powerful digital power mixer, offering a blend of user-friendly features, comprehensive control, and robust performance. Whether used in a live sound setting or for recorded sessions, it stands out as an exceptional tool for audio professionals committed to delivering high-quality sound.
Top Page Image Contents