Cub Cadet 7264 Fender Mounted Conrtols and Features, Fuel Fill Cap, PTO Reverse Override Switch

FENDER MOUNTED CONRTOLS AND FEATURES

ABF G

GC N D E

M

H

				H
J	L			J
	K		K
	Figure 11
A	Fuel Fill Cap	G	Hand Holds
B	PTO Reverse Override Switch	H	Amber Hazard Lights
C	PTO Selection Lever	J	Tail Lights (Red)
D	Hydraulic Lift Lever	K	Reverse Lights (White)
E	Trans. Hi/Lo Shift Lever	L	Storage Tray
F	Cup Holder	M	Foldable ROPS
		N	Seat Belt

A. Fuel Fill Cap

The fuel fill cap is located on the left fender beside the operator’s seat.

WARNING: Never fill the fuel tank to the top of the filler neck. Expansion could result in overflow, allowing highly flammable fuel to come in contact with the operator.

B. PTO Reverse Override Switch

The PTO reverse override switch is located on the left fender. Depress the front of the switch to engage the override which allows the PTO to operate while the tractor is traveling in the reverse direction. Once activated, this function remains activated until the ignition switch is turned to the OFF position, regardless of the number of times the PTO is turned off using the PTO switch.

WARNING: Use EXTREME caution when operating PTO driven attach- ments while traveling in the reverse direction.

C. PTO Selection Lever

The PTO selection lever is located on the left fender.

•Push the lever forward to engage the mid PTO.

•Push the lever rearward to engage the rear PTO.

•Move the lever to the center position to simultaneously engage both the rear PTO and mid PTO.

D. Hydraulic Lift Lever w/Position Control

The hydraulic lift lever is located on the right fender. This lever controls the position of the three point hitch lift arms. There is a direct relationship between the position of the lever and the height position of the installed equipment.

•To lower the lift arms, move the lift lever forward until the desired height setting is attained.

•To raise the lift arms, move the lift lever rearward until the desired height setting is attained.

13