ÎSTEP 9:
Push the engine switch to the ON posi- tion.
ÎSTEP 10: Open fuel valve.
ÎSTEP 11:
Set CHOKE lever to the CHOKE posi- tion.
Î STEP 12: |
Pull the starter handle.
If the engine fails to start after 3 pulls, squeeze the trigger gun to release pres- sure, and repeat step.
ÎSTEP 13:
Move back the CHOKE lever to the RUN position as indicated.
NOTE:
–Always check engine oil and gasoline before operating your pressure washer.
–Do NOT overfill engine oil
–Move CHOKE lever to the RUN position once the engine runs warm and stable.
–A WARM start require the CHOKE lever to be in the CHOKE position.
8English