HAZARD
RISK OF INJURY FROM SPRAY
WHAT CAN HAPPEN | HOW TO PREVENT IT |
•High velocity fluid spray can cause objects to break, propelling particles at high speed.
•Light or unsecured objects can become hazardous projectiles.
•Always wear ANSI approved Z87 safety glasses.Wear protective clothing to protect against accidental spraying.
•Never point wand at, or spray people or animals.
•Always secure trigger lock when wand is not in service to prevent accidental operation.
•Never permanently secure trigger in pull back (open) position.
The powerful spray from your pressure washer is capable of causing damage to surfaces such as wood, glass, automobile paint, auto striping and trim, and delicate objects such as flowers and shrubs. Before spraying,
check the item to be cleaned to assure yourself that it is strong enough to resist damage from the force of the spray. Avoid the use of the concentrated spray stream except for very strong surfaces like concrete and steel.
Operating without flow of water will result in equipment damage. Operating the pressure washer with water supply shutoff will void your warranty. You should never run this pres- sure washer for more than 2 minutes without pulling the trigger to allow cool water to enter the pump and the heated (recirculated) water to exit.
| BOX CONTENTS |
| |
| Accessories Panel |
| |
| Part No. D25081 |
| |
| English/ |
| |
| French |
| |
| Owners |
| |
| Manual | Handle | |
Engine Frame, Wheel |
| ||
Bagged Accessories Panel | Part No. D22316 with | ||
Assembly, and Dual | |||
Tank Cleaning System |
| Screws Part No. D22901 | |
|
|
Knobs |
|
|
|
|
Part No. | Saddle |
|
|
|
16471 |
|
|
| |
| Bolts Part |
|
|
|
| No. D23196 |
|
|
|
| Nozzle | Chemical Hose |
|
|
| Cleaning | Part No. H140 |
|
|
| Kit |
|
|
|
Allen Wrench Part No. 16797 |
| High Pressure | Engine Oil | |
Cleaning Tool Part No. NCT001 |
| |||
| Hose |
| ||
|
|
|
| |
| Bagged Parts |
| Part No. D28094 |
|
|
|
|
| |
| Spray Gun | |||
| Part No. D27858 | Part No. D23314 |
| |
7- ENG | D30333 |