Campbell Hausfeld Model CP5101 Assembly and Preoperation, Operation, Trigger Safety Latch

Page 11

Model CP5101

Assembly and Preoperation (Continued)

Trigger Safety Latch

In the engaged position, the trigger safety latch prevents the gun from being triggered accidentally. Push the latch fully up to engage it (See Figure 17 and 18).

Always engage the trigger safety latch when the unit is not in use.

Figure 17 - Trigger locked

Figure 18 - Trigger unlocked

Operation

Surface Preparation

The following cleaning procedure will help you organize your cleaning task and ensures that you will achieve the best results in the shortest amount of time. Remember to use the spraying / cleaning techniques mentioned in the following section.

Before starting a pressure washer cleaning job, prepare the surface you intend to clean. Clear furniture from the area and make sure that all windows and doors are closed tightly. Also, protect all plants and trees near the cleaning area with a drop cloth. A covering ensures that your plants won’t be sprayed by the detergents.

Start Up

ALWAYS use this start up procedure to ensure that the unit is started safely and properly.

If water has frozen in the pressure washer, thaw the pressure washer in a warm room before starting. DO NOT pour hot water on or into the pump;

internal parts will be damaged.

1.Ensure that the power switch is in the “OFF” position.

2.Attach a garden hose to the inlet side of the pump and connect it to the water supply. Use a hose with an internal diameter (I.D.) of 5/8 in. (15,9 mm) and a length of 50 ft. (15 m) or less.

Some local plumbing codes require backflow prevention when connecting to a fresh water supply. Install a backflow preventer upstream

from the pump if necessary.

a.If inlet water pressure is over 100 psi, install a regulating water valve at the garden hose connection.

b.Do not exceed 100˚ F (38˚ C) inlet water temperature.

NOTE: The inlet water supply must have a minimum flow rate of 5 gpm (19 lpm). 3. Turn the water supply ON.

Never run the unit dry. Be sure the water supply is completely turned on before operating the unit.

4.Trigger the gun until water sprays from the tip indicating that all air is purged from the system. Set the trigger safety latch.

5.Plug the power cord into a grounded 120V outlet, that is on a dedicated circuit. Press the reset button on the GFCI plug adapter. This must be done each time the unit is plugged into an outlet.

www.chpower.com 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Español página Sp1 Do not use an extension cord with this ProductFrançaise Page Fr1 For parts, product and service information Table of ContentsDescription SpecificationsImportant Safety Information Safety GuidelinesSafety Symbols Tool Use and Care Model CP5101 Important Safety InformationElectrical Safety Grounding Instructions Frequently Asked Questions Read & Follow All Instructions Do Not Discard Contents in the CartonModel CP5101 Unpacking Additional Items Not IncludedChemical Injector GlossaryRecommended Uses for this Pressure Washer Model CP5101 GettingUnpackingTo Know Your Pressure WasherAssembly and Preoperation Assembly and PreoperationSurface Preparation Model CP5101 Assembly and PreoperationTrigger Safety Latch OperationHow to Avoid Damaging Surfaces Adjusting the Spray Fan AngleAngle to the Cleaning Surface Distance From Cleaning SurfaceModel CP5101 Operation Technical and Consumer Information MaintenanceMaintenance Schedule Tips For Extending The Life Of Your Pressure WasherDate Maintenance Performed Replacement Components Required Model CP5101 Service RecordSymptom Cause Solution Troubleshooting GuideSymptom Model CP5101 Troubleshooting GuideRepair Parts Illustration For Replacement Parts or Technical Assistance, CallDescription Part Number Qty Replacement Parts ListWhat is not Covered Under this Warranty WarrantyEnglish Ne pas utiliserDe rallonge Avec ce produitApprendre à connaître votre Table des MatièresFr3 SpécificationsImportantes Instructions De Sécurité Symboles De SécuritéDirectives De Sécurité Fr5 Modèle CP5101 Importantes Instructions De Sécurité SuiteSécurité électrique Instructions de mise à la terre Utilisation et entretien de l’outilQuestions Fréquemment Posées Conserver ces instructions Ne pas les jeter Fr7 Modèle CP5101 DéballageContenu de la boîte Autres articles non inclusFr8 GlossaireFr9 Utilisations recommandées pour cette laveuse à pressionFr10 Assemblage et préopérationAssemblage et préopération Opération Modèle CP5101 Assemblage et préopération SuiteOpération Suite Modèle CP5101 Opération Suite Fr14 EntretienHoraire d’entretien Information technique et pour les consommateursFr15 Modèle CP5101 État de serviceDate Entretien exécuté Éléments de remplacement requis Fr16 Guide de dépannageSymptôme Causes possibles Action corrective Fr17 Modèle CP5101 Guide de dépannageSymptôme Fr18 Pour pièces de rechange ou assistance technique, appelerFr19 Liste de pièces de rechangeNo. de Description Numéro de pièce Qté Fr20 Garantie LimitéeLavadoras a presión con motor a gasolina Por Información Sobre Piezas, Productos y Servicios ÍndiceSp3 DescripciónEspecificaciones Importantes Instrucciones De Seguridad Medidas de SeguridadSímbolos de Seguridad Sp5 Modelo CP5101Seguridad Eléctrica Instrucciones de Conexión a Tierra Uso y Cuidado de la HerramientaPreguntas Frecuentes Importantes Instrucciones De Seguridad ContinuaciónArtículos Adicionales no Incluidos Modelo CP5101 DesempaqueContenido de la Caja Sp8 GlosarioSp9 Modelo CP5101 Conozca su Lavadora a PresiónUsos Recomendados para esta Lavadora a Presión Sp10 Ensamblaje y Antes del FuncionamientoEnsamblaje y Antes del Funcionamiento Sp11 Seguro del GatilloPreparación de Superficie EncendidoFuncionamiento Continuación Modelo CP5101 Funcionamiento Continuación Información Técnica y Para el Consumidor MantenimientoConsejos para Prolongar la Vida de su Lavadora a Presión Planificación del MantenimientoSp15 Modelo CP5101 Registro de ServicioFecha Maintenimiento efectuado Repuestos requeridos Sp16 Tabla de Identificación de ProblemasProblema Causa Solution Sp17 Modelo CP5101 Tabla de Identificación de ProblemasProblema SoluciónFigura 22 Ilustración de las piezas de repuesto Sp18Sp19 Lista de Piezas de RepuestoNo. de Descripción Número del repuesto Ctd Sp20 Garantía Limitada

CP5101 specifications

The Campbell Hausfeld CP5101 is a versatile and innovative air compressor that has gained popularity among both DIY enthusiasts and professionals. This portable model is designed for a variety of tasks, making it a reliable choice for those in need of compressed air for their projects.

One of the standout features of the CP5101 is its lightweight and compact design. Weighing in at just under 30 pounds, it is easy to transport and store, which is particularly advantageous for users who may need to move it between job sites or tuck it away when not in use. The carrying handle adds to its portability, ensuring that it can be easily maneuvered even in tight spaces.

The CP5101 delivers impressive performance with its 1.0 horsepower motor, which provides a maximum pressure of 125 PSI. This allows it to power various pneumatic tools such as nail guns, airbrushes, and inflators. With a tank capacity of 5.5 gallons, it offers a good amount of air storage, ensuring that users can complete their tasks without frequent interruptions for refills.

Another noteworthy aspect of the Campbell Hausfeld CP5101 is its oil-free pump. This technology eliminates the need for regular maintenance associated with oil-lubricated compressors, making it more convenient for users. The oil-free pump also contributes to a cleaner working environment, as it reduces the risk of oil spillage and contamination.

In terms of noise level, the CP5101 operates relatively quietly compared to many other compressors in its class. This makes it an attractive option for indoor use or in residential areas where noise could be an issue. Users can operate the compressor without disturbing the peace, which is a significant benefit for those who live in closer quarters.

The CP5101 is equipped with user-friendly controls and gauges, allowing for easy monitoring of pressure levels. This setup enables users to make precise adjustments, ensuring optimal performance for their specific applications. Additionally, it features a safety release valve, which adds an extra layer of protection during operation.

Overall, the Campbell Hausfeld CP5101 stands out for its combination of portability, performance, and ease of use. Whether for home improvement projects, automotive repairs, or other compressed air applications, this air compressor is engineered to meet the diverse needs of its users, making it a dependable addition to any toolkit.
Top Page Image Contents