Campbell Hausfeld manual Model CP5101 Operation

Page 13

Model CP5101

Operation (Continued)

Once applied to a cleaning surface, detergents take time to break down dirt and grime. Detergents work best when applied at low pressure.

You can effectively clean surfaces by combining the chemical action of detergents with high pressure rinses. On vertical surfaces, apply the detergent starting at the bottom and work your way upward. This method prevents the detergent from sliding down and causing streaks. Begin high pressure rinsing at the bottom and work your way upward. On particularly tough stains, use a brush in combination with detergents and high pressure rinsing.

1.Follow manufacturer’s label directions for mixing correct concentrations of soap/detergents. The soap detergent to water ration through the pump is approximately 10% (1 to 10).

2.Insert the filter end of the clear plastic detergent tube into the detergent container.

3.Use the black 65° quick connect spray tip.

4.Adjust the detergent injection flow by turning the collar of the injector. Turning collar clockwise increases detergent flow.

General Cleaning Tips

1.Apply the detergent so that it thoroughly covers the cleaning surface. Apply the detergent from bottom to top to prevent the detergent from sliding down and streaking. Wait a couple of minutes for the detergent to break down the dirt and grime. Use a brush to lightly scrub heavily soiled areas. Never allow the detergent to dry on the cleaning surface.

2.To rinse: replace black 65° spray tip with another color tip.

Never replace quick connect tip when gun

is triggered. Always engage trigger lock on gun

before removing or installing quick connect tips.

3.After using detergents, flush the suction system by placing the detergent suction tube into a bucket of clean water and spraying with the black spray tip.

Cleaning Power

The easiest way to regulate the cleaning power of your pressure washer is by changing the distance from the surface you are cleaning. Begin spraying with a wide fan pattern while standing several feet from the surface. Slowly move closer to the object you are cleaning, adjusting the spray pattern as necessary, until you find the most effective cleaning technique.

NOTE: The unit may have also a pressure adjustment knob on the pump that can adjust the pressure.

Final Rinse

The final rinse should start at the bottom and work upward. Make sure that you thoroughly rinse the surface and that you remove all detergent.

Pressure Relief Procedure

To reduce the risk of bodily injury or property damage, always follow this procedure whenever spraying is stopped, when work is completed, and before checking or repairing any part of the system.

1.Engage the trigger safety latch.

2.Turn the unit off.

3.Shut off the water supply.

4.Disengage the trigger safety latch and trigger the gun to relieve pressure.

5.Re-engage the trigger safety latch.

6.When checking or repairing unit, remove the wall outlet plug from the wall.

7.Before overnight storage, long term storage, or transporting unit, disconnect the water supply.

Shutdown

1.Be sure all detergent is flushed from system.

2.Turn the motor OFF.

3 Turn the water supply OFF.

4.After the motor and water supply are turned off, trigger the gun to depressurize the system.

NEVER turn the water supply off before turning the engine/motor off. Serious damage could

occur to the pump and/or engine/motor.

NEVER disconnect the high pressure discharge hose from the machine while the system is

pressurized. To depressurize, turn engine/motor off, turn water supply off and squeeze gun trigger 2-3 times.

5.After each use, wipe all surfaces of the pressure washer with a clean, damp cloth.

Storage

•Do not store the pressure washer outdoors.

•Do not store the pressure washer where it might freeze unless it has been properly winterized.

Winterizing Instructions

1.Disconnect the high pressure hose from the pump.

2.Insert a 12 inch to 14 inch piece of garden hose into the pump inlet.

3.Place a funnel in the other end of the garden hose.

Read the manufacturer’s instructions for safe handling and disposal of RV antifreeze.

4.Pour approximately 6 oz. of RV antifreeze into the funnel.

5.Jog the On/Off Switch briefly until the RV antifreeze comes out of the pump outlet.

www.chpower.com 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Française Page Fr1 Do not use an extension cord with this ProductEspañol página Sp1 For parts, product and service information Table of ContentsDescription SpecificationsSafety Symbols Safety GuidelinesImportant Safety Information Electrical Safety Grounding Instructions Model CP5101 Important Safety InformationTool Use and Care Frequently Asked Questions Model CP5101 Unpacking Contents in the CartonAdditional Items Not Included Read & Follow All Instructions Do Not DiscardChemical Injector GlossaryRecommended Uses for this Pressure Washer Model CP5101 GettingUnpackingTo Know Your Pressure WasherAssembly and Preoperation Assembly and PreoperationTrigger Safety Latch Model CP5101 Assembly and PreoperationOperation Surface PreparationAngle to the Cleaning Surface Adjusting the Spray Fan AngleDistance From Cleaning Surface How to Avoid Damaging SurfacesModel CP5101 Operation Maintenance Schedule MaintenanceTips For Extending The Life Of Your Pressure Washer Technical and Consumer InformationDate Maintenance Performed Replacement Components Required Model CP5101 Service RecordSymptom Cause Solution Troubleshooting GuideSymptom Model CP5101 Troubleshooting GuideRepair Parts Illustration For Replacement Parts or Technical Assistance, CallDescription Part Number Qty Replacement Parts ListWhat is not Covered Under this Warranty WarrantyDe rallonge Ne pas utiliserAvec ce produit EnglishApprendre à connaître votre Table des MatièresFr3 SpécificationsDirectives De Sécurité Symboles De SécuritéImportantes Instructions De Sécurité Sécurité électrique Instructions de mise à la terre Modèle CP5101 Importantes Instructions De Sécurité SuiteUtilisation et entretien de l’outil Fr5Questions Fréquemment Posées Contenu de la boîte Modèle CP5101 DéballageAutres articles non inclus Conserver ces instructions Ne pas les jeter Fr7Fr8 GlossaireFr9 Utilisations recommandées pour cette laveuse à pressionAssemblage et préopération Assemblage et préopérationFr10 Opération Modèle CP5101 Assemblage et préopération SuiteOpération Suite Modèle CP5101 Opération Suite Horaire d’entretien EntretienInformation technique et pour les consommateurs Fr14Date Entretien exécuté Éléments de remplacement requis Modèle CP5101 État de serviceFr15 Symptôme Causes possibles Action corrective Guide de dépannageFr16 Symptôme Modèle CP5101 Guide de dépannageFr17 Fr18 Pour pièces de rechange ou assistance technique, appelerNo. de Description Numéro de pièce Qté Liste de pièces de rechangeFr19 Fr20 Garantie LimitéeLavadoras a presión con motor a gasolina Por Información Sobre Piezas, Productos y Servicios ÍndiceEspecificaciones DescripciónSp3 Símbolos de Seguridad Medidas de SeguridadImportantes Instrucciones De Seguridad Seguridad Eléctrica Instrucciones de Conexión a Tierra Modelo CP5101Uso y Cuidado de la Herramienta Sp5Preguntas Frecuentes Importantes Instrucciones De Seguridad ContinuaciónContenido de la Caja Modelo CP5101 DesempaqueArtículos Adicionales no Incluidos Sp8 GlosarioUsos Recomendados para esta Lavadora a Presión Modelo CP5101 Conozca su Lavadora a PresiónSp9 Ensamblaje y Antes del Funcionamiento Ensamblaje y Antes del FuncionamientoSp10 Preparación de Superficie Seguro del GatilloEncendido Sp11Funcionamiento Continuación Modelo CP5101 Funcionamiento Continuación Consejos para Prolongar la Vida de su Lavadora a Presión MantenimientoPlanificación del Mantenimiento Información Técnica y Para el ConsumidorFecha Maintenimiento efectuado Repuestos requeridos Modelo CP5101 Registro de ServicioSp15 Problema Causa Solution Tabla de Identificación de ProblemasSp16 Problema Modelo CP5101 Tabla de Identificación de ProblemasSolución Sp17Figura 22 Ilustración de las piezas de repuesto Sp18No. de Descripción Número del repuesto Ctd Lista de Piezas de RepuestoSp19 Sp20 Garantía Limitada

CP5101 specifications

The Campbell Hausfeld CP5101 is a versatile and innovative air compressor that has gained popularity among both DIY enthusiasts and professionals. This portable model is designed for a variety of tasks, making it a reliable choice for those in need of compressed air for their projects.

One of the standout features of the CP5101 is its lightweight and compact design. Weighing in at just under 30 pounds, it is easy to transport and store, which is particularly advantageous for users who may need to move it between job sites or tuck it away when not in use. The carrying handle adds to its portability, ensuring that it can be easily maneuvered even in tight spaces.

The CP5101 delivers impressive performance with its 1.0 horsepower motor, which provides a maximum pressure of 125 PSI. This allows it to power various pneumatic tools such as nail guns, airbrushes, and inflators. With a tank capacity of 5.5 gallons, it offers a good amount of air storage, ensuring that users can complete their tasks without frequent interruptions for refills.

Another noteworthy aspect of the Campbell Hausfeld CP5101 is its oil-free pump. This technology eliminates the need for regular maintenance associated with oil-lubricated compressors, making it more convenient for users. The oil-free pump also contributes to a cleaner working environment, as it reduces the risk of oil spillage and contamination.

In terms of noise level, the CP5101 operates relatively quietly compared to many other compressors in its class. This makes it an attractive option for indoor use or in residential areas where noise could be an issue. Users can operate the compressor without disturbing the peace, which is a significant benefit for those who live in closer quarters.

The CP5101 is equipped with user-friendly controls and gauges, allowing for easy monitoring of pressure levels. This setup enables users to make precise adjustments, ensuring optimal performance for their specific applications. Additionally, it features a safety release valve, which adds an extra layer of protection during operation.

Overall, the Campbell Hausfeld CP5101 stands out for its combination of portability, performance, and ease of use. Whether for home improvement projects, automotive repairs, or other compressed air applications, this air compressor is engineered to meet the diverse needs of its users, making it a dependable addition to any toolkit.
Top Page Image Contents