Briggs & Stratton 20209 owner manual Features and Controls Section, Know Your Pressure Washer

Page 5

Features and Controls Section

2

KNOW YOUR PRESSURE WASHER

Read this owner’s manual and safety rules before operating your pressure washer.

Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.

Accessory Tray

Fuel Tank

Throttle Lever

High Pressure

 

 

Choke Lever

Hose

 

 

 

 

Fuel Valve

 

 

 

 

 

 

Recoil Starter

 

 

 

(on front of engine)

 

 

 

Air Filter

 

 

 

Nozzle Extension with

 

 

 

Quick Connect

 

 

 

Spray Tips

Chemical Injection

 

 

Oil Fill Cap

 

 

 

Siphon/Filter

 

 

 

Water Inlet

 

Pump equipped with

Spray Gun

Data Tag

Automatic Cool Down System

High Pressure Outlet

 

 

 

Accessory Tray — Provides convenient storage for standard and optional accessories, such as brushes, turbo wands, ect.

Air Filter — Protects engine by filtering dust and debris out of intake air.

Automatic Cool Down System — Cycles water through pump when water reaches 125°-155°F.Warm water will discharge from pump onto ground.This system prevents internal pump damage.

Chemical Injection Siphon/Filter — Use to siphon detergent or other pressure washer chemicals into the low pressure stream.

Choke Lever — Prepares a cold engine for starting.

Data Tag — Provides model, revision and serial number of pressure washer. Please have these readily available if calling for assistance.

Fuel Tank — Fill tank with regular unleaded fuel. Always leave room for fuel expansion.

Fuel Valve — Used to turn fuel on and off to engine.

High Pressure Hose — Connect one end to the water pump and the other end to the spray gun.

High Pressure Outlet — To connect high pressure hose.

Nozzle Extension with Quick Connect — Allows you to switch between four different spray tips and turbo nozzle.

Oil Fill Cap — Fill engine with oil here.

Pump — Develops high pressure.

Recoil Starter — Use for starting the engine manually.

Safety Goggles (not shown) — Always use the enclosed goggles or other eye protection when running your pressure washer.

Spray Gun — Controls the application of water onto cleaning surface with trigger device. Includes safety latch.

Spray Tips — Chemical injection, 0°, 15°, and 40°: for various high pressure cleaning applications.

Throttle Lever—Sets engine in starting mode for recoil starter and stops a running engine.

Water Inlet — Connect garden hose here.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Manual No GS Revision 4 05/20/2004 Helpline 1-888-611-6708 M-F8-5 CTEquipment Description Table of ContentsSafety Rules When Transporting or Repairing Equipment High pressure spray may damage fragile items including glass Know Your Pressure Washer Features and Controls SectionPreparing Pressure Washer for USE AssemblyAssembly Handle Align Holes Supports Add Engine Oil and FuelConnect Hose and Water Supply to Pump Checklist Before Starting EngineInspect inlet Screen, doOperation Section HOW to USE YourPressure Washer To Start Pressure WasherOperation Cleaning and Applying Chemical How to Use the Turbo NozzleHow to Use the Utility Brush Thermal Relief Pressure Washer RinsingAutomatic Cool Down System Pressure Washer Maintenance Maintenance SectionGeneral Maintenance Recommendations Nozzle Maintenance MaintenanceRing Maintenance Pump MaintenanceData Tag Engine MaintenanceStorage Always wear eye protection when using PumpSaverPreparing the Unit for Storage Storing the EngineProblem Cause Correction TroubleshootingTroubleshooting Exploded View and Parts List Unit Section Exploded Views and Parts ListsDescription Items Not Illustrated DescriptionExploded View and Parts List Pump Exploded Views and Parts ListsTabla DE Contenidos Reglas de SeguridadDescripción DEL Equipo Reglas DE SeguridadPeligro Sección 1 Reglas de SeguridadPrecaución Conozca SU Maquina Lavadora DE Presion Características y ControlesPreparando EL Lavador a Presión Para SU USO MontajeMontaje Agregar Aceite al Motor y Gasolina Sección 3 MontajeManubrio Alinear Orificios Soportes del Coloque la lavadora a presión sobre una superficie niveladaLista de Revision Previa al Arranque del Motor Conecte la Manguera y el Suministro de Agua a la BombaDeposite la gasolina adecuada en el tanque del combustible Proporcione el suministro de agua adecuadoCómo Usar SU Máquina Lavadora a Presión OperaciónCómo Darle Arranque a su Máquina Lavadora a Presión Asegúrese que la unidad esté niveladaSección 4 Operación Cómo Usar el Cepillo de Servicio Cómo Usar la Boquilla a ChorroLimpieza y Aplicación del Químico Para aplicar el detergente, siga los siguientes pasosSistema de Enfriamiento Automático Alivio Térmico Enjuage de la Máquina Lavadora a PresiónMantenimiento DE LA Maquina Lavadora a Presion MantenimientoRecomendaciones Generales Elimine el Aire y los Contaminantes de la Bomba Sección 5 MantenimientoMantenimiento de la Boquilla Mantenimiento de los Anillos OMantenimiento DEL Motor Sección 5 Mantenimiento y AlmacenamientoPreparando LA Unidad Para SU Almacenamiento Almacenando EL MotorReparacion DE Daños Diagnosticos de AveríasEquipo Para Uso Del Consumidor Para Uso Comercial Efectiva desde el 12 ro de NoviembreGenerador Portátil AñoAbout your equipment warranty TROY-BILT Owner Warranty Policy Effective November 12Equipment Consumer Use Commercial Use Portable Generator Years 2nd year parts only
Top Page Image Contents