English
5. For safe operation
IMPORTANT
Remove any obstacle before beginning work.
3.Inspect the entire unit for loose fasteners and fuel leakage. Make sure that the cutting attachment is properly installed and securely fastened.
4.Be sure to attach the cutting attachment guard which is suitable for the cutting head. If the cutting head is the metal blade, change the guard. In case of
5.Always use the shoulder strap. Adjust the strap for comfort before starting the engine. The strap should be adjusted so the left hand can comfortably hold the handlebar grip approximately waist high.
■STARTING THE ENGINE
1.Keep bystanders and animals at least 50feet (15m) away from the operating point. If you are approached, immediately stop the engine.
2.The product is equipped with a centrifugal clutch mechanism, so the cutting attachment could rotate as soon as the engine is started. When starting the engine, place the product onto the ground in a flat clear area and hold it firmly in place so as to ensure that neither the cutting part nor the throttle come into contact with any obstacle when the engine starts.
WARNING
Make sure the throttle is at idle position.
Never place the throttle into the high speed position or half throttle position (throttle lock position) when starting the engine.
3.After starting the engine, check to make sure that the cutting attachment stops rotating when the throttle is moved fully back to its original position (idle position). If it continues to rotate even after the throttle has been moved fully back, turn off the engine and take the unit to your authorized Red Max servicing dealer for repair.
■USING THE PRODUCT
IMPORTANT
Cut only materials recommended by the
14