Zenoah EXZ2610DL owner manual Symbols on the machine, Never modify your machine

Page 6

EXZ2610DL

3. Warning labels on the machine

15m (50ft)

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(1)Read owner’s manual before operating this machine.

(2)Wear head, eye and ear protection.

(3)Wear foot protection.

(4)Wear gloves.

(5)Beware of thrown objects.

(6)Warning / Attention

(7)Keep all children, bystanders and helpers 15 meters away from the machine.

If warning label peels off or becomes soiled and impossible to read, you should contact the dealer from which you purchased the product to order new labels and affix them in the required location(s).

Never modify your machine.

We won’t warrant the machine, if you use the remodeled brushcutter or if you don’t observe the proper usage written in the manual.

4. Symbols on the machine

For safe operation and maintenance, symbols are carved in relief on the machine. According to these indications, please be careful not to make a mistake.

The port to refuel the “MIX GASOLINE”

Position: FUEL TANK CAP

The direction to close the choke

Position: AIR CLEANER COVER

The direction to open the choke

Position: AIR CLEANER COVER

(PS-EX Only)

MIN MAX

If you turn the rod by screwdriver follow the arrow to the “MAX” position, the chain oil flow more, and if you turn to the “MIN” position, less.

Position: Bottom of the TRANSMISSION

GB-6

Image 6
Contents EXZ2610DL Wear head, eye and ear protection E13*97/68SH2G3*2002/88*0404*00Contents Parts location EXZ2610DL-PUO BC-EX LRT-EX PS-EX HE-EXSpecification BC-EXSymbols on the machine Never modify your machineWorking Circumstance For safe operationWorking Condition Working PlanUsing the Product Before Starting EngineStarting the Engine Handling Fuel MaintenanceIf Someone Comes TransportationGB-10 Connecting Throttle Wire Set upMounting Engine Installing Handle Connecting Switch WiresSet up BC-EX only Attaching the Trimming Mechanism Set up LRT-EX onlySet up PS-EX only Balance UnitSet up HE-EX only Put on strap and attach unit to strapFuel and chain oil Adjusting Handle Position Adjusting Wheel HeightOperation Stopping Engine Adjusting Throttle Cable Adjusting Idling SpeedCutting Work Line Head Usage Adjusting the Line LengthOperation BC-EX only Trimming Grass and WeedsNy lon line SET UPOperation Optional blade usage BC-EX only Choose the BladeOperation Cutting MethodZenoah Controlling Blade Bounce Transporting the UnitOperation PS-EX only Adjusting the angle of the cutting bladesOperation LRT-EX only Checking oil supplyOperation HE-EX only Maintenance AIR FilterFuel Filter Muffler Replacement Plug is a NGK CMR7HSpark Plug Spark ArresterFor safety reasons, do not use metalreinforced line Maintenance BC-EX onlyProcedures to be Performed After Every 100 Hours of USE Refilling Trimming LineBlades Maintenance LRT-EX onlyAngle Transmission TransmissionGuide BAR Maintenance PS-EX onlyOiling Port Sprocket025 0.65 mm Disposal Maintenance HE-EX only StorageTroubleshooting guide Check Probable Causes ActionLimited warranty