Zenoah EXZ2610DL owner manual Contents

Page 3

Husqvarna Zenoah Co., Ltd.

80100101 and up

1st January 2008

Masahiko GOUDA

EXZ2610DL

G

B

SAFETY FIRST

Instructions contained in warnings within this manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such instructions carefully and follow them without fail.

WARNINGS IN THE MANUAL

WARNING

This mark indicates instructions, which must be followed in or- der to prevent accidents, which could lead to serious bodily in- jury or death.

IMPORTANT

This mark indicates instructions, which must be followed, or it leads to mechanical failure, breakdown, or damage.

NOTE

This mark indicates hints or directions useful in the use of the product.

Contents

 

1.

Parts location

4

2.

Specifications

5

3.

Warning labels on the machine

6

4.

Symbols on the machine

6

5.

For safe operation

7

6.

Set up

11

7.

Fuel and chain oil

15

8.

Operation

16

9.

Maintenance

25

10.

Storage

31

11.

Disposal

31

12.

Troubleshooting guide

31

GB-3

Image 3
Contents EXZ2610DL E13*97/68SH2G3*2002/88*0404*00 Wear head, eye and ear protectionContents EXZ2610DL-PUO BC-EX LRT-EX PS-EX HE-EX Parts locationBC-EX SpecificationNever modify your machine Symbols on the machineWorking Plan For safe operationWorking Condition Working CircumstanceUsing the Product Before Starting EngineStarting the Engine Transportation MaintenanceIf Someone Comes Handling FuelGB-10 Connecting Switch Wires Set upMounting Engine Installing Handle Connecting Throttle WireSet up BC-EX only Balance Unit Set up LRT-EX onlySet up PS-EX only Attaching the Trimming MechanismPut on strap and attach unit to strap Set up HE-EX onlyFuel and chain oil Adjusting Handle Position Adjusting Wheel HeightOperation Stopping Engine Adjusting Idling Speed Adjusting Throttle CableTrimming Grass and Weeds Adjusting the Line LengthOperation BC-EX only Cutting Work Line Head UsageChoose the Blade SET UPOperation Optional blade usage BC-EX only Ny lon lineOperation Cutting MethodZenoah Transporting the Unit Controlling Blade BounceChecking oil supply Adjusting the angle of the cutting bladesOperation LRT-EX only Operation PS-EX onlyOperation HE-EX only Maintenance AIR FilterFuel Filter Spark Arrester Replacement Plug is a NGK CMR7HSpark Plug MufflerRefilling Trimming Line Maintenance BC-EX onlyProcedures to be Performed After Every 100 Hours of USE For safety reasons, do not use metalreinforced lineTransmission Maintenance LRT-EX onlyAngle Transmission BladesSprocket Maintenance PS-EX onlyOiling Port Guide BAR025 0.65 mm Check Probable Causes Action Maintenance HE-EX only StorageTroubleshooting guide DisposalLimited warranty