Zenoah EXZ2610DL owner manual Adjusting Throttle Cable, Adjusting Idling Speed

Page 18

EXZ2610DL

8. Operation

ADJUSTING THROTTLE CABLE

•The normal play is 1 or 2 mm when measured at the carburetor side end. Readjust with the cable adjuster as required.

1 ~ 2 mm

(1) Cable adjuster

(1)

ADJUSTING IDLING SPEED

(1)

(1)Idle adjusting screw

1.When the engine tends to stop frequently at idling mode, turn the adjusting screw clockwise.

2.When the cutting head keeps rotating after releasing the trigger, turn the adjusting screw counter-clockwise.

NOTE

• Warm up the engine before adjusting the idling speed.

GB-18

Image 18

Contents EXZ2610DL Wear head, eye and ear protection E13*97/68SH2G3*2002/88*0404*00Contents Parts location EXZ2610DL-PUO BC-EX LRT-EX PS-EX HE-EXSpecification BC-EXSymbols on the machine Never modify your machineWorking Circumstance For safe operationWorking Condition Working PlanUsing the Product Before Starting EngineStarting the Engine Handling Fuel MaintenanceIf Someone Comes TransportationGB-10 Connecting Throttle Wire Set upMounting Engine Installing Handle Connecting Switch WiresSet up BC-EX only Attaching the Trimming Mechanism Set up LRT-EX onlySet up PS-EX only Balance UnitSet up HE-EX only Put on strap and attach unit to strapFuel and chain oil Adjusting Handle Position Adjusting Wheel HeightOperation Stopping Engine Adjusting Throttle Cable Adjusting Idling SpeedCutting Work Line Head Usage Adjusting the Line LengthOperation BC-EX only Trimming Grass and WeedsNy lon line SET UPOperation Optional blade usage BC-EX only Choose the BladeOperation Cutting MethodZenoah Controlling Blade Bounce Transporting the UnitOperation PS-EX only Adjusting the angle of the cutting bladesOperation LRT-EX only Checking oil supplyOperation HE-EX only Maintenance AIR FilterFuel Filter Muffler Replacement Plug is a NGK CMR7HSpark Plug Spark ArresterFor safety reasons, do not use metalreinforced line Maintenance BC-EX onlyProcedures to be Performed After Every 100 Hours of USE Refilling Trimming LineBlades Maintenance LRT-EX onlyAngle Transmission TransmissionGuide BAR Maintenance PS-EX onlyOiling Port Sprocket025 0.65 mm Disposal Maintenance HE-EX only StorageTroubleshooting guide Check Probable Causes ActionLimited warranty