Toro TMC-212 manual Manual Mode, Operate Watering Programs, Operate Selected Stations

Page 33

Note: The position of the PROGRAMS switch does not determine which program will run during automatic controller operation. In other words, if a program has an assigned watering day schedule, start time and a station with run time, it will operate automatically regardless of the position of the PROGRAMS switch.

Manual Mode

Manual mode enables automatic watering programs and their assigned stations to be operated at any time.

Note: Once watering has started, refer to page 32 for additional manual control operations.

Note: Upon completion of a Manual mode operation, the controller will return to the Automatic mode.

Operate Watering Program(s)

Confirm that the control dial is in the RUN position.

Position the PROGRAMS switch to select a program.

Press the MANUAL START button two times to start the program watering cycle. The first active station number and the Watering On symbol will begin flashing.

4.To select additional programs, repeat steps and . Note: Additional programs are stacked (staged to run sequentially) in the order they are selected.

The watering program identifier (A, B or C) will be displayed as each program is selected. The program currently operating is indicated by the flashing program identifier. As one program finishes, the next program in the stacked sequence will start.

Flashing

Operate Selected Stations

Confirm the control dial is in the RUN position.

Position the PROGRAMS switch to select a program.

Press the MANUAL START button one time.

The station numbers assigned to the program will be displayed. The first station number in sequence will begin flashing. To select the station(s) to operate, use the following procedure:

To select the station, press the +/ON button.

To skip the station press the –/OFFbutton.

When the desired station numbers are displayed, press the MANUAL START button one time to start watering. The active station number and the Watering On symbol will begin flashing.

31

Image 33
Contents TMC-212 Page Table of Contents Controller Components Controller ComponentsLCD Display Control ButtonsControl Dial Positions Wire connector for the valve common wire Controller Components Indoor Model Installation Controller InstallationMaster Valve Common Station Wire Valves Connecting the ValvesConnecting the Plug-in Transformer Connecting a Pump Start RelayPage Installing the Cabinet If applicable to the terminal labeled PUMP/MV Connecting a Pump Start Relay Connecting the Power Source Important Do not use ENB and NC switch Connecting a Rain Sensor optionalValve House Getting Started Irrigation System BasicsWatering Program Basics Watering Program Details Setting the Station Run Time Setting Program Start TimesPlanning Your Watering Schedule Guidelines for WateringFilling Out the Watering Schedule Form Example Program a Program B Program C About the Watering Program Memory Programming the ControllerPage Turn the control dial to the Watering Days position Setting an Interval ScheduleSetting an Odd or Even Schedule Using the Day Exclusion Feature Turning Off a Program Setting Program Start Times Setting Pump Start/Master Valve Control Setting Station Run TimesDisplay will be flashing P On Pump On Controller Operation Automatic ModeManual Mode Operate Watering ProgramsOperate Selected Stations Cancel Watering Watering Control FeaturesAdjust the Operating Station Run Time Pause WateringRain Delay Feature Season Adjust % Feature Turn Off Controller Operation To clear and reset memory of a selected program Clearing the Program MemoryTo clear the memory of all programs Adding a 2-station Expansion Module About Automatic Circuit ProtectionUsing Pump Start/Master Valve and Well Recovery Controls Example Troubleshooting Specifications Toro Promise Limited Three- or Five-year Warranty Warranty

TMC-212 specifications

The Toro TMC-212 is a robust yet sophisticated irrigation controller designed for optimal landscape management in various settings, including residential, commercial, and municipal applications. This device offers an exceptional balance of advanced technology and user-friendly operation, making it an essential tool for maintaining healthy and vibrant landscapes.

One of the standout features of the TMC-212 is its intuitive interface, which allows users to program multiple zones with ease. With the ability to control up to 12 irrigation zones, the TMC-212 accommodates a wide range of landscape layouts, ensuring that each area receives the appropriate amount of water. The controller also supports both manual and automatic operation modes, giving users the flexibility to adjust settings depending on weather conditions and seasonal requirements.

Equipped with Toro's innovative WaterSense technology, the TMC-212 is designed to conserve water while maintaining optimal irrigation schedules. This feature integrates real-time weather data and site-specific information to adjust watering schedules dynamically, helping to minimize waste and reduce overall water consumption. The controller can be connected to rain sensors and soil moisture sensors, further enhancing its ability to respond to environmental conditions.

The TMC-212 also stands out for its wireless connectivity options. Users can connect the controller to a smartphone or tablet via Bluetooth, providing them with the convenience of remote access. This feature allows for quick adjustments and real-time monitoring, ensuring that irrigation needs can be met swiftly and efficiently, even when users are away from the site.

In terms of durability, the Toro TMC-212 is built to withstand various environmental conditions. The rugged design ensures that the controller remains functional in outdoor settings, resisting the effects of moisture, dust, and temperature fluctuations. This reliability is crucial for ensuring consistent landscape care.

For ease of installation, the TMC-212 comes with clear instructions and can be integrated into existing systems without significant modifications. The user-friendly design, coupled with its advanced irrigation management features, makes the Toro TMC-212 a valuable asset for anyone looking to enhance their landscape irrigation practices.

In summary, the Toro TMC-212 is a cutting-edge irrigation controller that combines advanced features, user-friendly technology, and durable construction. It addresses the evolving needs of modern landscape management, making it an ideal choice for professionals and property owners alike. Whether you’re managing a large commercial property or a small residential garden, the TMC-212 provides the tools needed for efficient, effective irrigation.