Controller Components
The following are brief descriptions of the controller components and display elements. Each of these items will be explained in further detail within the appropriate programming, operating and installation sections of this guide.
1 - LCD Display
A - “Start Time” symbol is displayed when setting the program start times.
B - “Well Recovery” symbol is displayed when well recovery time delay is in use.
C - Program start time identification numbers
F - “Watering On” symbol is displayed when a water- ing station is running. Symbol blinks when watering is paused.
G - “Watering Off” symbol is displayed when Rain Delay feature is active.
H - “Percent” symbol is displayed when the Season Adjust feature is in use.
I - Watering Station identification numbers. J - Day of the week identifiers.
K - “Run Time” symbol is displayed when setting the watering station run times.
2 - Control Buttons
+/ON button – Increases the time display, scrolls forward through the program information and selects watering days.
NEXT button – Advances to the next portion of program information. Resumes watering if paused. Advances through stations manually when watering.
MANUAL START button – Selects and starts manual watering operations.
3 - Control Dial – Selects all controller programming and operation controls (except Manual Start).
Control Dial Positions
RUN 
– The normal dial position for all automatic and manual operations.
CURRENT TIME/DAY
– Enables the clock time and day to be set.
WATERING DAYS 
– Enables the watering day schedules to be set and reviewed.
START TIMES 
– Enables the program start times to be set and reviewed.
STATION TIMES
– Enables the station run time to be set and reviewed.
(COnTInUED)
3