Toro TMC-212 manual Watering Control Features, Pause Watering, Cancel Watering, Skip Stations

Page 34

Watering Control Features

Once the sprinkler system is running, the following manual control features become available:

Pause Watering

To pause watering, press the +/ON and –/OFFbuttons at the same time.

•The station will temporarily turn off.

•The Watering On symbol will begin flashing.

•The display will show the amount of station time remaining.

Note: If watering is not resumed within 8 minutes, all watering operations will be canceled and the controller will return to the Automatic mode.

To release Pause and resume operation, press the NEXT button.

•Watering activity will resume from the point of interruption.

Cancel Watering

Two methods of canceling current watering are available: Method 1: Turn the control dial to the OFF position, pause for two seconds, then turn the dial back to the RUN position.

Method 2: Press the +/ON and –/OFFbuttons at the same time – two times.

Once canceled, all watering operations will be terminated and the controller will return to the Automatic mode.

Skip Stations

Press the NEXT button one time.

•The station currently watering will shut off and the next station will start.

•If the last station is skipped, the program will end. If additional programs have been set to operate, the next program in alphabetical order will start.

Adjust the Operating Station Run Time

To temporarily adjust the run time of the currently operat- ing station:

Press the +/ON button to increase run time, or the –/OFFbutton to decrease run time.

•If the run time is decreased to less than 1 minute, the station will shut off and the next station in sequence will begin watering.

•The adjusted run time is temporary and does not alter the station run time set for automatic watering program operation.

32

Page 33 Page 35
Image 34
Page 33 Page 35
Contents TMC-212 Page Table of Contents Controller Components Controller ComponentsControl Buttons LCD DisplayControl Dial Positions Wire connector for the valve common wire Controller Components Controller Installation Indoor Model InstallationConnecting the Valves Master Valve Common Station Wire ValvesConnecting a Pump Start Relay Connecting the Plug-in TransformerPage Installing the Cabinet If applicable to the terminal labeled PUMP/MV Connecting a Pump Start Relay Connecting the Power Source Connecting a Rain Sensor optional Important Do not use ENB and NC switchGetting Started Irrigation System Basics Valve HouseWatering Program Basics Watering Program Details Setting Program Start Times Setting the Station Run TimeGuidelines for Watering Planning Your Watering ScheduleFilling Out the Watering Schedule Form Example Program a Program B Program C Programming the Controller About the Watering Program MemoryPage Setting an Interval Schedule Turn the control dial to the Watering Days positionSetting an Odd or Even Schedule Using the Day Exclusion Feature Turning Off a Program Setting Program Start Times Setting Station Run Times Setting Pump Start/Master Valve ControlDisplay will be flashing P On Pump On Automatic Mode Controller OperationOperate Watering Programs Manual ModeOperate Selected Stations Adjust the Operating Station Run Time Watering Control FeaturesCancel Watering Pause WateringRain Delay Feature Season Adjust % Feature Turn Off Controller Operation Clearing the Program Memory To clear and reset memory of a selected programTo clear the memory of all programs About Automatic Circuit Protection Adding a 2-station Expansion ModuleUsing Pump Start/Master Valve and Well Recovery Controls Example Troubleshooting Specifications Warranty Toro Promise Limited Three- or Five-year Warranty

TMC-212 specifications

The Toro TMC-212 is a robust yet sophisticated irrigation controller designed for optimal landscape management in various settings, including residential, commercial, and municipal applications. This device offers an exceptional balance of advanced technology and user-friendly operation, making it an essential tool for maintaining healthy and vibrant landscapes.

One of the standout features of the TMC-212 is its intuitive interface, which allows users to program multiple zones with ease. With the ability to control up to 12 irrigation zones, the TMC-212 accommodates a wide range of landscape layouts, ensuring that each area receives the appropriate amount of water. The controller also supports both manual and automatic operation modes, giving users the flexibility to adjust settings depending on weather conditions and seasonal requirements.

Equipped with Toro's innovative WaterSense technology, the TMC-212 is designed to conserve water while maintaining optimal irrigation schedules. This feature integrates real-time weather data and site-specific information to adjust watering schedules dynamically, helping to minimize waste and reduce overall water consumption. The controller can be connected to rain sensors and soil moisture sensors, further enhancing its ability to respond to environmental conditions.

The TMC-212 also stands out for its wireless connectivity options. Users can connect the controller to a smartphone or tablet via Bluetooth, providing them with the convenience of remote access. This feature allows for quick adjustments and real-time monitoring, ensuring that irrigation needs can be met swiftly and efficiently, even when users are away from the site.

In terms of durability, the Toro TMC-212 is built to withstand various environmental conditions. The rugged design ensures that the controller remains functional in outdoor settings, resisting the effects of moisture, dust, and temperature fluctuations. This reliability is crucial for ensuring consistent landscape care.

For ease of installation, the TMC-212 comes with clear instructions and can be integrated into existing systems without significant modifications. The user-friendly design, coupled with its advanced irrigation management features, makes the Toro TMC-212 a valuable asset for anyone looking to enhance their landscape irrigation practices.

In summary, the Toro TMC-212 is a cutting-edge irrigation controller that combines advanced features, user-friendly technology, and durable construction. It addresses the evolving needs of modern landscape management, making it an ideal choice for professionals and property owners alike. Whether you’re managing a large commercial property or a small residential garden, the TMC-212 provides the tools needed for efficient, effective irrigation.
Top Page Image Contents