Toro TMC-212 manual Connecting a Rain Sensor optional, Important Do not use ENB and NC switch

Page 15

Connecting the Power Source (cont.)

Toro Rain Sensor

Model TWRS

5

Plastic

 

Insert

6

Connecting a Rain Sensor (optional)

A rain sensor is an optional control device that connects directly to the TMC-212 to automatically interrupt auto- matic controller operation during rain.

A sensor bypass switch is provided to enable sensor operation to be disabled as needed.

A sensor configuration switch enables the controller to work with a normally-open or normally-closed rain sensor. When the rain sensor absorbs moisture it signals the TMC-212 to suspend automatic watering operations. The no Watering symbol is displayed until the sensor drys out and automatically resets.

When the no Watering symbol disappears, controller operation will resume as programmed.

1.Route the sensor wires into the controller housing through the access hole provided.

2.Release the Sensor terminal connectors and remove the plastic u-shaped insert. Connect the sensor wires per the instructions provided with the sensor.

3.Set the Sensor configuration switch (6) to NC (normally Closed) or NO (normally Open) as required by the sensor type installed.

 

IMPORTANT: Do not use ENB and NC switch

 

 

position simultaneously unless a Normally Closed

 

 

rain sensor is connected. Watering operation will

 

 

be suspended if this condition occurs.

 

4.

Set the Sensor control switch (5) as required: ENB

 

 

(enable) allows the rain sensor to interrupt watering;

 

 

DIS (disable) bypasses the rain sensor input.

 

5.

Refer to the instructions provided with the rain sensor

13

 

for complete setup and operating information.

Image 15
Contents TMC-212 Page Table of Contents Controller Components Controller ComponentsLCD Display Control ButtonsControl Dial Positions Wire connector for the valve common wire Controller Components Indoor Model Installation Controller InstallationMaster Valve Common Station Wire Valves Connecting the ValvesConnecting the Plug-in Transformer Connecting a Pump Start RelayPage Installing the Cabinet If applicable to the terminal labeled PUMP/MV Connecting a Pump Start Relay Connecting the Power Source Important Do not use ENB and NC switch Connecting a Rain Sensor optionalValve House Getting Started Irrigation System BasicsWatering Program Basics Watering Program Details Setting the Station Run Time Setting Program Start TimesPlanning Your Watering Schedule Guidelines for WateringFilling Out the Watering Schedule Form Example Program a Program B Program C About the Watering Program Memory Programming the ControllerPage Turn the control dial to the Watering Days position Setting an Interval ScheduleSetting an Odd or Even Schedule Using the Day Exclusion Feature Turning Off a Program Setting Program Start Times Setting Pump Start/Master Valve Control Setting Station Run TimesDisplay will be flashing P On Pump On Controller Operation Automatic ModeManual Mode Operate Watering ProgramsOperate Selected Stations Pause Watering Watering Control FeaturesCancel Watering Adjust the Operating Station Run TimeRain Delay Feature Season Adjust % Feature Turn Off Controller Operation To clear and reset memory of a selected program Clearing the Program MemoryTo clear the memory of all programs Adding a 2-station Expansion Module About Automatic Circuit ProtectionUsing Pump Start/Master Valve and Well Recovery Controls Example Troubleshooting Specifications Toro Promise Limited Three- or Five-year Warranty Warranty

TMC-212 specifications

The Toro TMC-212 is a robust yet sophisticated irrigation controller designed for optimal landscape management in various settings, including residential, commercial, and municipal applications. This device offers an exceptional balance of advanced technology and user-friendly operation, making it an essential tool for maintaining healthy and vibrant landscapes.

One of the standout features of the TMC-212 is its intuitive interface, which allows users to program multiple zones with ease. With the ability to control up to 12 irrigation zones, the TMC-212 accommodates a wide range of landscape layouts, ensuring that each area receives the appropriate amount of water. The controller also supports both manual and automatic operation modes, giving users the flexibility to adjust settings depending on weather conditions and seasonal requirements.

Equipped with Toro's innovative WaterSense technology, the TMC-212 is designed to conserve water while maintaining optimal irrigation schedules. This feature integrates real-time weather data and site-specific information to adjust watering schedules dynamically, helping to minimize waste and reduce overall water consumption. The controller can be connected to rain sensors and soil moisture sensors, further enhancing its ability to respond to environmental conditions.

The TMC-212 also stands out for its wireless connectivity options. Users can connect the controller to a smartphone or tablet via Bluetooth, providing them with the convenience of remote access. This feature allows for quick adjustments and real-time monitoring, ensuring that irrigation needs can be met swiftly and efficiently, even when users are away from the site.

In terms of durability, the Toro TMC-212 is built to withstand various environmental conditions. The rugged design ensures that the controller remains functional in outdoor settings, resisting the effects of moisture, dust, and temperature fluctuations. This reliability is crucial for ensuring consistent landscape care.

For ease of installation, the TMC-212 comes with clear instructions and can be integrated into existing systems without significant modifications. The user-friendly design, coupled with its advanced irrigation management features, makes the Toro TMC-212 a valuable asset for anyone looking to enhance their landscape irrigation practices.

In summary, the Toro TMC-212 is a cutting-edge irrigation controller that combines advanced features, user-friendly technology, and durable construction. It addresses the evolving needs of modern landscape management, making it an ideal choice for professionals and property owners alike. Whether you’re managing a large commercial property or a small residential garden, the TMC-212 provides the tools needed for efficient, effective irrigation.