Genie Z-34, Z-22IC manual Operation from Platform, To Steer, To Drive

Operator's Manual Fourth Edition • First Printing

OPERATING INSTRUCTIONS

Operation from Platform

1Turn the key switch to platform control.

2Pull out both ground and platform red Emergency Stop buttons to the on position.

3Gasoline/LPG models: Choose fuel by moving the fuel select switch to the desired position.

4Start the engine. Do not press down the foot switch when starting the engine.

To Position Platform

1Press down the foot switch.

2Slowly move the appropriate function control handle or toggle switch according to the markings on the control panel.

Machines equipped with Platform Level Control Disable Function: The platform level toggle switch will not operate when the primary boom is raised past the drive speed limit switch.

To Steer

1Press down the foot switch.

2Turn the steer wheels with the thumb rocker switch located on top of the drive control handle.

Use the color-coded direction triangles on the platform controls and the drive chassis to identify the direction the wheels will turn.

To Drive

1Press down the foot switch.

2Increase speed: Slowly move the drive control handle off center.

Decrease speed: Slowly move the drive control handle toward center.

Stop: Return the drive control handle to center or release the foot switch.

Use the color-coded direction arrows on the platform controls and the drive chassis to identify the direction the machine will travel.

Machine travel speed is restricted when the booms are raised or extended.

24 Z-34/22 IC Part No. 1000048