Operator's Manual | Fourth Edition • First Printing | |
|
|
|
|
|
|
OPERATING INSTRUCTIONS
Drive Enable
Light on indicates that the boom has moved just past either non- steer wheel and the drive function has been interrupted.
To drive, hold the drive enable switch to either side and slowly move the drive control handle off center.
Be aware that the machine may move in the opposite direction that the drive and steer controls are moved.
Always use the
Drive Speed Select
·Machine on incline symbol: Low range operation for inclines
·Machine on level surface symbol: High range operation for maximum drive speed
Engine Idle Select (rpm)
Select the engine idle (rpm) using the symbols on the control panel.
·Rabbit and foot switch symbol: foot switch activated high idle
·Turtle symbol: low idle
·Rabbit symbol: high idle
Generator (if equipped)
To start the generator, move the generator toggle switch to the on position.
Plug a power tool into the power to platform GFCI outlet.
To turn off the generator, move the generator toggle switch to the off position.
Note: Machine functions will not operate while the generator is running and the foot switch is not pressed down. When the foot switch is pressed down, the generator will turn off and the machine functions will operate.
26 | Part No. 1000048 |