Genie Z-34, Z-22IC manual At the Platform Controls, Test the Horn, Test the Foot Switch

Page 20

Operator's Manual

Fourth Edition • First Printing

 

 

 

 

 

 

FUNCTION TESTS

At the Platform Controls

Test the Emergency Stop

15Turn the key switch to platform control and restart the engine.

16Push in the platform red Emergency Stop button to the off position.

Result: The engine should turn off and all functions should not operate.

17Pull out the red Emergency Stop button and restart the engine.

Test the Horn

18 Push the horn button.

Result: The horn should sound.

Test the Foot Switch

19Push in the platform red Emergency Stop button to the off position.

20Pull out the red Emergency Stop button to the on position but do not start the engine.

21Press down the foot switch and attempt to start the engine by moving the start toggle switch to either side.

Result: The engine should not start.

22Do not press down the foot switch and start the engine.

23Do not press down the foot switch. Test each machine function.

Result: The machine functions should not operate.

Test Machine Functions

24 Press down the foot switch.

25Activate each machine function control handle or toggle switch.

Result: All boom and platform functions should operate through a full cycle.

Note: Control the speed of boom functions by adjusting the boom function speed controller. Drive and steer functions are not affected by the boom function speed controller.

Test the Steering

26 Press down the foot switch.

27Depress the thumb rocker switch on top of the drive control handle in the direction identified by the blue triangle on the control panel.

Result: The steer wheels should turn in the direction that the blue triangles point on the drive chassis.

28Depress the thumb rocker switch in the direction identified by the yellow triangle on the control panel.

Result: The steer wheels should turn in the direction that the yellow triangles point on the drive chassis.

18

Z-34/22 IC

Part No. 1000048

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessElectrocution Hazards Tip-over HazardsCSA Fall Hazards Collision Hazards Component Damage HazardBattery Safety Burn Hazards Explosion and Fire HazardsDamaged Machine Hazards Bodily Injury HazardDecal Legend Controls Platform Control PanelGround Control Panel ControlsOperators Manual Pre-operation Inspection FundamentalsPre-operation Inspection Maintenance Maintenance Symbols LegendObserve and Obey Check the Hydraulic Oil LevelCheck the Engine Oil Level Check the BatteriesScheduled Maintenance Check the Tire PressureFunction Tests At the Ground Controls Test the Emergency StopTest the Machine Functions Test the Tilt SensorTest the Foot Switch At the Platform ControlsTest the Horn Test Machine FunctionsTest the Drive Enable System Test Drive and BrakingTest Limited Drive Speed Test the Lift/Drive Select Function if equippedWorkplace Inspection Workplace InspectionOperating Instructions Only use the machine as it was intendedStarting the Engine Emergency StopAuxiliary Controls Operation from GroundTo Drive Operation from PlatformTo Steer Driving on a slope To determine the slope gradeDrive Enable Generator if equippedDrive Speed Select Engine Idle Select rpmPlatform Overload Indicator Light if equipped Machine Not Level Indicator Light if equippedFall Protection After Each UseDecals Inspection for Decals with WordsGround Controls Side Chassis Platform Engine SideInspection for Decals with Symbols Ground Controls Side Chassis Platform Free-wheel Configuration for Winching Transport and Lifting InstructionsSecuring the Platform Securing to Truck or Trailer for TransitSecuring the Chassis Lifting Instructions Specifications 34/22 2WD IndustrialSpecifications Range of Motion Distributed By

Z-34, Z-22IC specifications

The Genie Z-34 and Z-22IC are innovative models in the aerial work platform category known for their versatility and efficiency. These machines are particularly popular for their reach, maneuverability, and suitability for various applications, from construction sites to maintenance tasks.

The Genie Z-34 boasts a working height of 40 feet, allowing operators to access high-reaching areas safely and efficiently. It features a robust platform capacity of 500 lbs, making it capable of handling multiple workers and equipment simultaneously. The Z-34 is designed with advanced drive and lifting systems that ensure smooth operation, even in challenging environments. Its compact design allows it to navigate tight spaces and congested job sites with ease, making it an ideal choice for urban projects.

On the other hand, the Genie Z-22IC, with a working height of approximately 26 feet, is designed for less demanding applications. The Z-22IC is distinguished by its impressive zero-degree turning radius, allowing it to operate in confined spaces without sacrificing performance. It has a maximum platform capacity of 500 lbs, similar to the Z-34, but its smaller footprint enhances its maneuverability, making it particularly suited for indoor work and tight outdoor spaces.

Both models incorporate Genie’s signature technologies, such as the Genie Smart Link system, which provides real-time diagnostics and operational data, helping operators maintain efficiency and safety. The Z-34 and Z-22IC are equipped with advanced hydraulic systems that ensure stability during operation, reducing the likelihood of tipping or accidents.

In terms of power, the Genie Z-34 and Z-22IC can be equipped with either electric or dual-fuel options, providing flexibility based on the job site requirements. The electric models are ideal for indoor use due to their zero emissions, while dual-fuel versions can be deployed for outdoor tasks requiring more power.

Safety is paramount in the design of both aerial platforms. They include features such as automatic leveling, slip-resistant platforms, and emergency stop buttons to enhance worker safety during use. The inclusion of fascia guards and harness attachments ensure compliance with safety regulations and protect the operators.

Overall, the Genie Z-34 and Z-22IC combine advanced technology with practical design, making them indispensable tools in various fields requiring aerial access solutions. With their superior performance, safety features, and ease of use, these models stand out as top choices for professionals seeking efficient and reliable access equipment.
Top Page Image Contents