Fourth Edition • First Printing | Operator's Manual | |
|
|
|
|
|
|
Starting the Engine
1At the ground controls, turn the key switch to the desired position.
2Be sure both ground and platform control red Emergency Stop buttons are pulled out to the on position.
3Gasoline/LPG models: Choose fuel by moving the fuel select switch to the desired position.
4Move the engine start toggle switch to either side. If the engine fails to start or dies, the restart delay will disable the start switch for 3 seconds.
If the engine fails to start after 15 seconds of cranking, determine the cause and repair any malfunction. Wait 60 seconds before trying to start again.
All models: In extreme cold conditions, 20°F /
Gasoline/LPG models: In extreme cold conditions, 20°F /
Emergency Stop
Push in the red Emergency Stop button to the off position at the ground or platform controls to stop all machine functions and turn the engine off.
Repair any function that operates when the red Emergency Stop button is pushed in.
Selecting and operating the ground controls will override the platform red Emergency Stop button.
OPERATING INSTRUCTIONS
Auxiliary Controls
Use auxiliary power if the primary power source (engine) fails.
1Turn the key switch to ground or platform control.
2Pull out the red Emergency Stop button to the on position.
3Press down the foot switch when operating the auxiliary controls from the platform.
4Simultaneously hold the auxiliary power switch on and activate the desired function.
The drive function will not operate with auxiliary power.
Operation from Ground
1Turn the key switch to ground control.
2Pull out the red Emergency Stop button to the on position.
3Gasoline/LPG models: Choose fuel by moving the fuel select switch to the desired position.
4Start the engine.
To Position Platform
1Hold the function enable switch to either side.
2Move the appropriate toggle switch according to the markings on the control panel.
Drive and steer functions are not available from the ground controls.
Part No. 1000048 | 23 |