Genie Z-34, Z-22IC manual Operating Instructions, Only use the machine as it was intended

Page 24

Operator's Manual

Fourth Edition • First Printing

 

 

 

 

 

 

Operating Instructions

Do Not Operate Unless:

You learn and practice the principles of safe machine operation contained in this operator's manual.

1Avoid hazardous situations.

2Always perform a pre-operation inspection.

3Always perform function tests prior to use.

4Inspect the workplace.

5Only use the machine as it was intended.

Fundamentals

The Operating Instructions section provides instructions for each aspect of machine operation. It is the operator's responsibility to follow all the safety rules and instructions in the operator's, safety and responsibilities manuals.

Using the machine for anything other than lifting personnel, along with their tools and materials, to an aerial work site is unsafe and dangerous.

Only trained and authorized personnel should be permitted to operate a machine. If more than one operator is expected to use a machine at different times in the same work shift, they must all be qualified operators and are all expected to follow all safety rules and instructions in the operator's, safety and responsibilities manuals. That means every new operator should perform a pre-operation inspection, function tests, and a workplace inspection before using the machine.

22

Z-34/22 IC

Part No. 1000048

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessElectrocution Hazards Tip-over HazardsCSA Fall Hazards Collision Hazards Component Damage HazardBattery Safety Burn Hazards Explosion and Fire HazardsDamaged Machine Hazards Bodily Injury HazardDecal Legend Controls Platform Control PanelGround Control Panel ControlsOperators Manual Pre-operation Inspection FundamentalsPre-operation Inspection Maintenance Maintenance Symbols LegendObserve and Obey Check the Hydraulic Oil LevelCheck the Engine Oil Level Check the BatteriesScheduled Maintenance Check the Tire PressureFunction Tests At the Ground Controls Test the Emergency StopTest the Machine Functions Test the Tilt SensorTest the Foot Switch At the Platform ControlsTest the Horn Test Machine FunctionsTest the Drive Enable System Test Drive and BrakingTest Limited Drive Speed Test the Lift/Drive Select Function if equippedWorkplace Inspection Workplace InspectionOperating Instructions Only use the machine as it was intendedStarting the Engine Emergency StopAuxiliary Controls Operation from GroundOperation from Platform To SteerTo Drive Driving on a slope To determine the slope gradeDrive Enable Generator if equippedDrive Speed Select Engine Idle Select rpmPlatform Overload Indicator Light if equipped Machine Not Level Indicator Light if equippedFall Protection After Each UseDecals Inspection for Decals with WordsGround Controls Side Chassis Platform Engine SideInspection for Decals with Symbols Ground Controls Side Chassis Platform Free-wheel Configuration for Winching Transport and Lifting InstructionsSecuring to Truck or Trailer for Transit Securing the ChassisSecuring the Platform Lifting Instructions Specifications 34/22 2WD IndustrialSpecifications Range of Motion Distributed By

Z-34, Z-22IC specifications

The Genie Z-34 and Z-22IC are innovative models in the aerial work platform category known for their versatility and efficiency. These machines are particularly popular for their reach, maneuverability, and suitability for various applications, from construction sites to maintenance tasks.

The Genie Z-34 boasts a working height of 40 feet, allowing operators to access high-reaching areas safely and efficiently. It features a robust platform capacity of 500 lbs, making it capable of handling multiple workers and equipment simultaneously. The Z-34 is designed with advanced drive and lifting systems that ensure smooth operation, even in challenging environments. Its compact design allows it to navigate tight spaces and congested job sites with ease, making it an ideal choice for urban projects.

On the other hand, the Genie Z-22IC, with a working height of approximately 26 feet, is designed for less demanding applications. The Z-22IC is distinguished by its impressive zero-degree turning radius, allowing it to operate in confined spaces without sacrificing performance. It has a maximum platform capacity of 500 lbs, similar to the Z-34, but its smaller footprint enhances its maneuverability, making it particularly suited for indoor work and tight outdoor spaces.

Both models incorporate Genie’s signature technologies, such as the Genie Smart Link system, which provides real-time diagnostics and operational data, helping operators maintain efficiency and safety. The Z-34 and Z-22IC are equipped with advanced hydraulic systems that ensure stability during operation, reducing the likelihood of tipping or accidents.

In terms of power, the Genie Z-34 and Z-22IC can be equipped with either electric or dual-fuel options, providing flexibility based on the job site requirements. The electric models are ideal for indoor use due to their zero emissions, while dual-fuel versions can be deployed for outdoor tasks requiring more power.

Safety is paramount in the design of both aerial platforms. They include features such as automatic leveling, slip-resistant platforms, and emergency stop buttons to enhance worker safety during use. The inclusion of fascia guards and harness attachments ensure compliance with safety regulations and protect the operators.

Overall, the Genie Z-34 and Z-22IC combine advanced technology with practical design, making them indispensable tools in various fields requiring aerial access solutions. With their superior performance, safety features, and ease of use, these models stand out as top choices for professionals seeking efficient and reliable access equipment.
Top Page Image Contents