Genie TMZ-34, TMZ-19 manual Towing Hazards, Decal Legend

Page 7

Fourth Edition • First Printing

Operator's Manual

 

 

 

 

 

 

Towing Hazards

Read, understand and obey all of your tow vehicle manufacturer’s recommendations, warnings and instructions before towing this machine.

Do not tow the machine unless the boom hold-down latches are securely locked in place.

Do not overload your tow vehicle. Check the manufacturer's Gross Vehicle Weight Rating (GVWR). To obtain the gross vehicle weight, add the tongue weight of the trailer to the vehicle weight (including vehicle, passengers and cargo).

Do not load cargo on the machine. The TMZ-34 is not designed to carry any extra cargo.

Be sure the hitch is securely attached to the tow vehicle.

Be sure the safety chains (if required) are securely attached to the tow vehicle.

Be sure that all driving lights are operational.

Be sure all hitch components, lights and mirrors and methods of attaching the trailer to the tow vehicle conform to local, state and federal regulations.

Do not tow the machine on public roads unless it meets all governmental regulations for towing.

Do not exceed 60 mph / 97 km/h. Obey all local and national towing speed laws.

Be sure to chock the wheels of the trailer when parking on a hill.

SAFETY RULES

Decal Legend

Genie product decals use symbols, color coding and signal words to identify the following:

Safety alert symbol—used to alert personnel to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

Red—used to indicate the presence of an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Orange—used to indicate the presence of a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Yellow with safety alert symbol— used to indicate the presence of a potentially hazardous situation which, if not avoided, may cause minor or moderate injury.

Yellow without safety alert symbol—used to indicate the presence of a potentially hazardous situation which, if not avoided, may result in property damage.

Green—used to indicate operation or maintenance information.

Part No. 97866

GenieTMZ-34/19

5

Image 7 Contents
Operator’s Manual Contact us Contents Do Not Operate Unless Safety RulesTip-over Hazards Electrocution HazardsBodily Injury Hazard Explosion and Fire Hazards Collision HazardsComponent Damage Hazards Lifting HazardsDecal Legend Towing HazardsCollision Hazard Personnel Lifting Configuration Tip-over HazardsMaterial Lifting Configuration Collision Hazards Fall HazardsLifting Hazard Battery Safety Burn HazardsExplosion Hazards Tip-over HazardPlatform Control Panel ControlsStop Ground Control Panel manual outriggers Ground Control Panel hydraulic outriggers Stop Stop Fundamentals Pre-operation InspectionPRE-OPERATION Inspection Pre-operation InspectionCheck the Hydraulic Oil Level MaintenanceMaintenance Symbols Legend Observe and ObeyCheck the Tires and Wheels MaintenanceCheck the Batteries Scheduled MaintenanceFunction Tests Set upTest Emergency Stop At the Ground ControlsTest Outrigger Interlock Test the Horn At the Platform ControlsTest the Boom Functions Test the Tilt SensorGround Control Panels Test Boom Functions and Function Enable Workplace Inspection Workplace InspectionOnly use the machine as it was intended Operating InstructionsTo Position Platform Emergency StopOperation from Ground Operation from PlatformTransport Manual LoweringManual Turntable Rotation Fall ProtectionMoving Machine Without a Tow Vehicle Towing InformationBacking Up with Trailer If equipped with surge brake After Each Use Material Lifting Configuration Set up Material Lifting Configuration Observe and ObeyVoltage Conversion Battery and Charger Instructions Observe and ObeyDry Battery Filling Charging Instructions To Charge BatteryDecal Inspection DecalsSide PowerGround ControlsAnsi & CSA SpecificationsReporting Safety Defects Reporting Safety DefectsGenie Industries PO Box Redmond, WA