Genie TMZ-34, TMZ-19 manual Battery Safety Burn Hazards, Explosion Hazards, Tip-over Hazard

Page 9

Fourth Edition • First Printing

Operator's Manual

 

 

 

 

 

 

Battery Safety

Burn Hazards

Batteries contain acid. Always wear protective clothing and eye wear when working with batteries.

Avoid spilling or contacting battery acid. Neutralize battery acid spills with baking soda and water.

Explosion Hazards

Keep sparks, flames and lighted tobacco away from batteries. Batteries emit an explosive gas.

The covers should be open during the entire charging cycle.

Do not contact the battery terminals or the cable clamps with tools that may cause sparks.

SAFETY RULES

Component Damage Hazards

Do not use any battery charger greater than 24V to charge the batteries.

Do not expose the batteries or the charger to water or rain.

Electrocution Hazards

Connect the battery charger to a grounded, AC 3-wire electrical outlet only.

Inspect daily for damaged cord, cables and wires. Replace damaged items before operating.

Avoid electrical shock from contact with battery terminals. Remove all rings, watches and other jewelry.

Tip-over Hazard

Do not use batteries that weigh less than the original equipment. Four batteries are used as counterweight and are critical to machine stability. Each battery must weigh 75 pounds / 34 kg.

Lifting Hazard

Use the appropriate number of people and proper lifting techniques when lifting batteries.

Part No. 97866

GenieTMZ-34/19

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Operator’s Manual Contact us ContentsDo Not Operate Unless Safety RulesTip-over Hazards Electrocution HazardsBodily Injury Hazard Component Damage Hazards Collision HazardsLifting Hazards Explosion and Fire HazardsDecal Legend Towing HazardsMaterial Lifting Configuration Collision Hazards Personnel Lifting Configuration Tip-over HazardsFall Hazards Collision HazardExplosion Hazards Battery Safety Burn HazardsTip-over Hazard Lifting HazardPlatform Control Panel ControlsStop Ground Control Panel manual outriggers Ground Control Panel hydraulic outriggers Stop Stop Fundamentals Pre-operation InspectionPRE-OPERATION Inspection Pre-operation InspectionMaintenance Symbols Legend MaintenanceObserve and Obey Check the Hydraulic Oil LevelCheck the Tires and Wheels MaintenanceCheck the Batteries Scheduled MaintenanceFunction Tests Set upAt the Ground Controls Test Emergency StopTest Outrigger Interlock Test the Boom Functions At the Platform ControlsTest the Tilt Sensor Test the HornGround Control Panels Test Boom Functions and Function Enable Workplace Inspection Workplace InspectionOnly use the machine as it was intended Operating InstructionsOperation from Ground Emergency StopOperation from Platform To Position PlatformManual Turntable Rotation Manual LoweringFall Protection TransportTowing Information Moving Machine Without a Tow VehicleBacking Up with Trailer If equipped with surge brake After Each Use Material Lifting Configuration Set up Material Lifting Configuration Observe and ObeyDry Battery Filling Charging Instructions Battery and Charger Instructions Observe and ObeyTo Charge Battery Voltage ConversionDecal Inspection DecalsGround PowerControls SideAnsi & CSA SpecificationsReporting Safety Defects Reporting Safety DefectsGenie Industries PO Box Redmond, WA

TMZ-34, TMZ-19 specifications

The Genie TMZ-34 and TMZ-19 are innovative models in the field of aerial work platforms designed for efficiency, mobility, and safety. These units reflect Genie’s commitment to providing high-quality, reliable equipment for various applications in construction, maintenance, and industrial settings.

The Genie TMZ-34 features a working height of 12.5 meters (41 feet) and a maximum outreach of 8.9 meters (29 feet). It is equipped with a proportional lift and drive system, allowing for smooth and precise operation. The platform's capacity stands at 227 kg (500 lbs), making it suitable for multiple operators or considerable materials. The TMZ-34 offers 360-degree rotation on its turntable, enhancing its versatility and maneuverability at elevated heights. Its compact design enables it to work effectively in tight spaces, making it a valuable asset for indoor applications or cramped construction sites.

On the other hand, the Genie TMZ-19 is designed for lighter tasks, with a working height of 7.8 meters (25.6 feet) and a maximum outreach of 3.7 meters (12 feet). With a platform capacity of 227 kg (500 lbs), it also accommodates multiple workers or tools. The Genie TMZ-19 boasts a lower weight, making it more portable and easier to transport between job sites.

Both models come with Genie’s advanced safety features, including automatic leveling systems, emergency descent mechanisms, and non-slip surfaces on the platforms. Additionally, they are designed with robust, durable materials that withstand heavy use.

Another significant technology incorporated in both models is the AC electric drive system, which reduces noise and emissions, aligning with environmental standards and making them suitable for indoor operations. The user-friendly controls and intuitive design also enhance operator comfort, allowing for extended periods of use without fatigue.

Overall, the Genie TMZ-34 and TMZ-19 are perfect choices for professionals seeking reliable, efficient, and safe aerial work platforms. Their advanced features, safety systems, and compact designs make them indispensable tools for a variety of tasks, from maintenance to construction, ensuring user satisfaction and improved productivity on the job.
Top Page Image Contents