Genie TMZ-34, TMZ-19 manual Check the Batteries, Scheduled Maintenance

Page 20

Operator's Manual

Fourth Edition • First Printing

 

 

 

 

 

 

MAINTENANCE

Check the Batteries

Proper battery condition is essential to good performance and operational safety. Improper fluid levels or damaged cables and connections can result in component damage and hazardous conditions.

This procedure does not need to be performed on machines with sealed or maintenance-free batteries.

Bodily injury hazard. Batteries contain acid. Avoid spilling or contacting battery acid. Neutralize battery acid spills with baking soda and water.

1Put on protective clothing and eye wear.

2Be sure that the battery cable connections are tight and free of corrosion.

3Be sure that the battery hold-down brackets are secure.

4Remove the battery vent caps.

5Check the battery acid level. If needed, replenish with distilled water to the bottom of the battery fill tube. Do not overfill.

6Install the vent caps.

Scheduled Maintenance

Maintenance performed quarterly, annually and every two years must be completed by a person trained and qualified to perform maintenance on this machine according to the procedures found in the service manual for this machine.

Machines that have been out of service for more than three months must receive the quarterly inspection before they are put back into service.

18

GenieTMZ-34/19

Part No. 97866

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessElectrocution Hazards Tip-over HazardsBodily Injury Hazard Collision Hazards Component Damage HazardsLifting Hazards Explosion and Fire HazardsTowing Hazards Decal LegendPersonnel Lifting Configuration Tip-over Hazards Material Lifting Configuration Collision HazardsFall Hazards Collision HazardBattery Safety Burn Hazards Explosion HazardsTip-over Hazard Lifting HazardControls Platform Control PanelStop Ground Control Panel manual outriggers Ground Control Panel hydraulic outriggers Stop Stop Pre-operation Inspection FundamentalsPre-operation Inspection PRE-OPERATION InspectionMaintenance Maintenance Symbols LegendObserve and Obey Check the Hydraulic Oil LevelMaintenance Check the Tires and WheelsScheduled Maintenance Check the BatteriesSet up Function TestsTest Outrigger Interlock At the Ground ControlsTest Emergency Stop At the Platform Controls Test the Boom FunctionsTest the Tilt Sensor Test the HornGround Control Panels Test Boom Functions and Function Enable Workplace Inspection Workplace InspectionOperating Instructions Only use the machine as it was intendedEmergency Stop Operation from GroundOperation from Platform To Position PlatformManual Lowering Manual Turntable RotationFall Protection TransportBacking Up with Trailer If equipped with surge brake Towing InformationMoving Machine Without a Tow Vehicle After Each Use Material Lifting Configuration Observe and Obey Material Lifting Configuration Set upBattery and Charger Instructions Observe and Obey Dry Battery Filling Charging InstructionsTo Charge Battery Voltage ConversionDecals Decal InspectionPower GroundControls SideSpecifications Ansi & CSAGenie Industries PO Box Redmond, WA Reporting Safety DefectsReporting Safety Defects

TMZ-34, TMZ-19 specifications

The Genie TMZ-34 and TMZ-19 are innovative models in the field of aerial work platforms designed for efficiency, mobility, and safety. These units reflect Genie’s commitment to providing high-quality, reliable equipment for various applications in construction, maintenance, and industrial settings.

The Genie TMZ-34 features a working height of 12.5 meters (41 feet) and a maximum outreach of 8.9 meters (29 feet). It is equipped with a proportional lift and drive system, allowing for smooth and precise operation. The platform's capacity stands at 227 kg (500 lbs), making it suitable for multiple operators or considerable materials. The TMZ-34 offers 360-degree rotation on its turntable, enhancing its versatility and maneuverability at elevated heights. Its compact design enables it to work effectively in tight spaces, making it a valuable asset for indoor applications or cramped construction sites.

On the other hand, the Genie TMZ-19 is designed for lighter tasks, with a working height of 7.8 meters (25.6 feet) and a maximum outreach of 3.7 meters (12 feet). With a platform capacity of 227 kg (500 lbs), it also accommodates multiple workers or tools. The Genie TMZ-19 boasts a lower weight, making it more portable and easier to transport between job sites.

Both models come with Genie’s advanced safety features, including automatic leveling systems, emergency descent mechanisms, and non-slip surfaces on the platforms. Additionally, they are designed with robust, durable materials that withstand heavy use.

Another significant technology incorporated in both models is the AC electric drive system, which reduces noise and emissions, aligning with environmental standards and making them suitable for indoor operations. The user-friendly controls and intuitive design also enhance operator comfort, allowing for extended periods of use without fatigue.

Overall, the Genie TMZ-34 and TMZ-19 are perfect choices for professionals seeking reliable, efficient, and safe aerial work platforms. Their advanced features, safety systems, and compact designs make them indispensable tools for a variety of tasks, from maintenance to construction, ensuring user satisfaction and improved productivity on the job.
Top Page Image Contents